iFixit - Answers With Device "Samsung Powerbot R9250"

Samsung Powerbot R9250: Water vacuumed up - vacuum stopped working

Sat, 15 Aug 2020 17:45:32 -0700

My Sammy is dead! Sammy sucked up some water and quit working. I dried it out by setting it out in warm weather and in the sun and cannot get it to come back on or connect to the recharge station. I have switched it off and on and done numerous things but no luck. I have done all kinds of internal checks but cannot see anything to trip other than the master switch. Is there a fuse or something else I need to check to restart. I did not see very much water in the dust bin.

⟐ Answered August 15, 2020 at 17:45 MST

Samsung Powerbot R9250: My power bot is just blinking when I try to charge it. do you repair?

Thu, 10 Jul 2025 10:14:10 -0700

I have a Samsung powerbot and it just stopped working one day. I have tried to replace the battery and the charging station but it does the same thing. When I move the powerbot to the charging station by hand, it starts to blink when on the charger. Then after a few mins it stops and will not charge. I am unsure if it is a fuse or what but I am looking for someone who can help fix it or someone who will repair it. I have contacted Samsung but they company they refered me to does not do repairs. It is just over a year old so there for my warranty is no good any more. Is there some place that will work on them or is there someone who knows how to fix it?

⟐ Commented July 10, 2025 at 10:14 MST

Samsung Powerbot R9250: power brush is rattling loudly when running

Sun, 04 Oct 2020 09:17:02 -0700

the power bar is making a very loud rattling noise when running. When I take the brush out of the unit, the noise stops

⟐ Answer edited October 04, 2020 at 9:17 MST

Samsung Powerbot R9250: Error code C03 shows up everytime

Thu, 10 Jul 2025 10:18:50 -0700

what should i do? The thing doesn't even follow any route anymore it just goes wherever it wants

⟐ Commented July 10, 2025 at 10:18 MST

Samsung Powerbot R9250: How do I remove the brush housing, there are no videos or instruction.

Thu, 19 Jul 2018 07:42:47 -0700

I reordered the housing unit to the brush and trying to replace it myself, but hitting a snag in removing the old part, seems very hard to remove the old part.

⟐ Answered July 19, 2018 at 7:42 MST

Samsung Powerbot R9250: vacuum is making a grinding type of noise when it has drag.

Wed, 30 Dec 2020 09:38:12 -0700

vacuum makes a plastic type grinding noise when excessive drag or higher pile carpet. reminds me of a belt slipping or plastic gears slipping. how do I fix and what may be the problem

Samsung Powerbot R9250: Error code C07 - vaceem backs up and stops

Mon, 20 Jul 2020 12:38:27 -0700

Error code C 07 - clean cliff sensors. I have cleaned them with a soft cloth nomerous times and error will not clear. Any suggestions?

The vacumm just backs up a foot from the base and trips the error code.

⟐ Commented July 20, 2020 at 12:38 MST

Samsung Powerbot R9250: Why does my unit only move inches forward and inches in reverse

Wed, 11 Dec 2019 16:33:05 -0700

My unit will only repeatedly move a few inches forward and a few inches in reverse .