I don’t know for sure how this happened but I can guess it cause of rainy day and the tablet was inside my bag .

I try to fix it with White Rice for 4 days but still not fix it . I don’t try to set it directly on sunlight sun with the rice , would it change something ?

Sometimes all the screen work and sometimes half of it get black-white lines .

when I turn it in Recovery mode - the half of it okay but still there has smash words like something not okay there .

The half of screen has Black-White lines and the other is good.

I would like to hear any suggestion that can help me with this situation.

Thanks.

⟐ Answer accepted December 04, 2022 at 10:27 MST

Is there any chance you can do a teardown of the Samsung Galaxy Tab S6? Or does anyone know of any teardowns? They've made it ridiculously thin and the speakers are freakishly powerful! I have no idea how they do it and Samsung were of little help.

⟐ Commented August 13, 2020 at 7:02 MST

need help.

⟐ Commented March 16, 2019 at 4:54 MST

I accidentally wiped my OS from my tablet before making a back up to restore with. Now I cannot access anything on my tablet apart from the initial “Samsung” boot screen. All buttons are functional.

I can currently access TRWP via recovery mode, however am having trouble coming to the point where I can reinstall an OS.

Could anyone guide me on how I could reinstall the OS again?

Thank you

⟐ Commented April 02, 2023 at 12:10 MST

⟐ Commented August 21, 2018 at 22:44 MST

⟐ Commented June 08, 2018 at 6:00 MST

Sometimes all the screen work but with lower resolution and sometimes half of it get black-white lines as the picture and the other half looks good.

The touch screen is working good and I am sure this is not a SW or firmware thing.

What could be the reason? any advise would be helpful.

⟐ Commented June 26, 2021 at 8:38 MST

Upon rebooting, screen would have color but after 2 or 3 minutes of use would again go back to black and white.

Tried several remedy suggestions, so far nothing has worked. Please help!

⟐ Answer edited January 28, 2020 at 6:45 MST

⟐ Commented October 27, 2019 at 14:14 MST

⟐ Edited by author September 13, 2017 at 0:36 MST

⟐ Commented August 21, 2018 at 6:16 MST

⟐ Answered December 09, 2017 at 11:28 MST

⟐ Commented April 25, 2024 at 0:41 MST

Thanks in advance.

⟐ Answer accepted October 20, 2023 at 16:11 MST

Hi again Jerry :

Another question for you or anyone. Does replacing the above mentioned Charging Port Assembly ( Galaxy Tab S3 9.7 SM-T820) require any SOLDERING to replace?

Thanks in advance.

⟐ Answered June 15, 2023 at 13:39 MST

⟐ Comment deleted May 28, 2022 at 13:28 MST

I've already opened the tablet and reseated the cable on both ends. It doesn't appear to have corrosion and the tablet wasn't dropped. What can I do?

Thanks in advance for your help!

⟐ Commented January 04, 2022 at 5:23 MST

⟐ Answered February 20, 2021 at 18:36 MST

As I inspected the area, I noticed a small metal piece was loose on the LCD’s end, near the connector. It was shaped like a staple/square bracket (like this ]). It was made of an unpainted, soft, flexible metal. I’m guessing it came off the ribbon? I’m going to try to get it repaired but I’m trying to figure out what the cost is going to be like.

Is that part off the screen, the ribbon, or… ? Any ideas? It seemed to come from where the ribbon connects to the LCD panel itself if that’s any indication. Thank you for your help!

⟐ Answered February 04, 2020 at 17:45 MST

⟐ Answered November 15, 2019 at 6:25 MST