⟐ Commented September 25, 2023 at 5:56 MST

⟐ Commented July 23, 2025 at 16:05 MST

Thanks. I've tried three different headphones (wired) and the same thing: I can hear the person talking but they cannot hear me until I unplug the jack. I've used wireless headphones and they work perfectly, so I am assuming there is something physical wrong with the jack. I suppose that answers my question, but I was wondering if there was a setting I was missing, an inadvertent mute setting in the software or something.

⟐ Commented May 31, 2024 at 19:22 MST

⟐ Answer accepted July 27, 2023 at 6:11 MST

⟐ Commented July 27, 2022 at 11:30 MST

⟐ Answered June 26, 2022 at 2:31 MST

I have to repeatedly press the power button for the screen to turn on again, even though it still turns on and can detect inputs ( I let it black out with youtube open, the video kept playing after blackout and I could even play another video despite habing no display.

Need to know if this is a major issue? What should I expect when getting it repaired?

I've also just noticed a slight seam in the casing. Pressing down/massaging the area seems to cause the screen blackout.

⟐ Commented February 19, 2026 at 22:00 MST

⟐ Commented January 23, 2024 at 22:29 MST

⟐ Answered August 09, 2023 at 10:14 MST

⟐ Answered April 04, 2025 at 20:04 MST

⟐ Answer edited May 18, 2024 at 6:53 MST

my USB port stopped working so I changed the whole board where the usb-port is located. After the replacement I had no network after booting (no calls and no mobile data).

So I looked up this problem and realized that there are two different versions of this "USB-board" (K1 and K2). I had bout K1. Unfortunately I had threw away my original part directly after the replacement.

So I bought the version K2 and replaced it. But still no network.

Does anybody have an idea if there are more different versions of this board?

Thank you very much in advance

Alex

⟐ Answer edited March 17, 2026 at 1:08 MST

الجهاز لايقوم بالتشغل إلا بعد أن اقوم بضغط الباور وهاذا يدل على أن المشكلة ليست في زرار التشغيل ، ارت أن أوضح لك هاذة النقطة . نعم انا أمتلك أفوميتر

الجهاز لايقوم بالتشغل إلا بعد أن اقوم بضغط الباور وهاذا يدل على أن المشكلة ليست في زرار التشغيل ، ارت أن أوضح لك هاذة النقطة

Translation Arabic - English

I need a Galaxy A52 schematic with an explanation of how to check the components within the schematic.

When I turn on the device, it doesn't boot up; instead, it repeats the same process until I disconnect the battery.

The device only turns on after I press the power button, which indicates that the problem isn't with the power button itself. I wanted to clarify this point for you. Yes, I have a multimeter.

The device only turns on after I press the power button, which indicates that the problem isn't with the power button itself. I wanted to clarify this point for you.

⟐ Answered March 04, 2026 at 17:50 MST

⟐ Answered May 16, 2025 at 5:56 MST

Obviously i won't be using any adhesives on the battery or anything else until i can confirm it was the screen that was broken.

I want to make sure its the screen that's broken first incase i have to send the part back. So just want to check it powers on without connecting the camera or fingerprint. Is it possible to test without those components in??

Show less

⟐ Answered October 22, 2024 at 14:21 MST

⟐ Answered September 23, 2024 at 13:20 MST

The catch is that Samsung refuses to repair it for free even though it is in warranty because they claim it has water ingress.

https://imgur.com/a/ytTqwJx

There are some photos they sent as evidence.

Is this evidence of water being present? I cannot fathom how it could be due to water as it was on the charger for almost 3 hours straight and was never exposed to water.

I live in the UK and will take Samsung to small court if you guys think I have a chance.

Thanks for your time

⟐ Answered July 29, 2024 at 1:59 MST

⟐ Answered July 27, 2024 at 9:17 MST

⟐ Answer accepted May 09, 2024 at 2:46 MST

⟐ Commented April 27, 2024 at 6:50 MST