⟐ Commented December 26, 2017 at 21:23 MST

i look for a Wifi Modul Dual Band 5 Ghz, because my Samsung support only 2,4 Ghz but my Fritz Box 7270 V3 support both 2,4 and 5 Ghz.

Who can help me to find out this Modul and maybe also replacement?

Thanks for Help / Support

regards Ron

⟐ Commented December 01, 2017 at 13:07 MST

Can it be fixed ?

⟐ Answered January 19, 2024 at 2:29 MST

⟐ Commented September 17, 2019 at 6:02 MST

⟐ Commented October 02, 2017 at 23:39 MST

Last night while I was charging my phone, it fell!

When I picked it up the first thing I noticed is that it had a vertical white line that ran from top to bottom and the area where the line was located could no longer work.

Then I noticed some pink/purplish lines running in all directions on the screen!

Now the whole screen is a pinkish purplish colour and the part of the screen where the white line was originally located has started to turn black, it is slowly progressing and I am guessing that by the end of the day my screen will be completely black.

Also, my screen isn't broken!

⟐ Commented September 25, 2020 at 21:10 MST

however using the phone all the way down to 2% I thought I would charged it over night, only to discover that it wasn't changing at all.

I have changed the leds and that hasn't made any difference, it still didn't charge.

I have reset it many times, cleaned the charging port but nothing!!

can someone please help?

⟐ Answered July 27, 2019 at 14:53 MST

I have a Galaxy A3 2016 ( 310F) with a broken LCD. The phone is pretty much destroyed everywhere so I have not intention of re-assembling. I have connected the new display and when I connect the USB cable the display lights up with the battery % charge. When I press the home button the same screen pops up.

However I seem to be having issues actually booting the phone.

I tried it like this guide:

https://youtu.be/yIp51gcTcpQ?t=882

But that doesn't seem to do anything.

Are there any other ways of booting the phone from the motherboard, or am I doing something wrong?

Or do I have to take out the b atteryu and pop it back in?

⟐ Answered January 13, 2018 at 15:49 MST

i dropped my phone by mistake last week and front glass broke(screen is ok, i think so). I´m thinking about repairing it on my own but I´m not that experienced with repairing mobile phones.

So, do i have to remove rear side of my phone(galaxy a3 2016) or just heat the front glass and then replace it with a new one?

Thanks for all your advices!

⟐ Answer accepted November 16, 2019 at 9:52 MST

⟐ Answered January 23, 2019 at 20:14 MST

I have plugged it into my iMac, but when I do this my computer does not recognise it. If anyone has a solution to this it would be a great help! Thank you in advance.

⟐ Answered December 29, 2017 at 7:56 MST

Just today i bought new board with charger connector back button home button and task button...(i dont know actually how the last touch button is called)

I replaced the old one with the new one,so left button reacts to touch and wrking, home button is working too ,but the back button on the right doesnt respond to my touch of finger it only lights up when i touch the task button on the left.so its brand new why it desnt work its not damaged at all i looked it very carefully twice.

⟐ Answer edited June 26, 2017 at 12:04 MST

:(

⟐ Commented December 29, 2017 at 14:17 MST

I ask because I have them in bedroom, generally in different boxes but never knowing when I accidentally put them together since I suffer of impulsive nervousness.

If harmful, how can damage be fixed?

Thanks beforehand.

⟐ Answer accepted June 01, 2017 at 23:29 MST

So I recently got the black screen of death problem of my Samsung Galacy A3 (2016). I went on to read about the possible solutions, including forced restart, forced shutdown, safe mode and recovery mode. Forced restart works, still no screen though, then the actual problem starts. The device cannot be shut down via holding down the power button.(I also read I have to start pressing the volume down and the power button at the same time to just shut down, but it still restarts) I could hold it for a whole minute, it won’t shut down. And yet, in other instances, like forced reset, the power button somehow works. I even know the actual touchscreen is still working, since if I press the power button and do a swipe on the screen, it does the unluck sound. Similarly, if I press it after this again, it locks the phone with the sound. So clearly, the power button in this instances work. But since I can only restart but not shut down (The “buttons” next to the Home button always light up if I press home button, so I know it never shut down) I cannot try safe, nor recovery mode. Possible solutions would be getting a miniUSB/HDMI cable (which I don’t have) and displaying my screen on the monitor, or waiting for it to lose battery, but the most annoying thing is that I have a bunch of alarms on the phone working, which annoy the !&&* out of me as I cannot disable them forever without the screen, and so i’d rather solve this sooner than later by at least powering it down for the time being.:D

⟐ Commented May 31, 2023 at 22:02 MST

As soon as I get inside my house, automatically my Orange provider network to make calls dissappears. I tried to change it to 2G only, 3G only. Searched networks manually but even with that, it got registered in network, and 5 minutes later, lost again.

It was bought in Singapore. I heard that maybe the motherboard is the issue.

Once I go outside in the street, works again.

Is there something that I can do about it? SIM is not the issue. IMEI is not the issue.

Any advice will be welcome.

Thanks in advance to all.

⟐ Commented February 27, 2018 at 15:33 MST

⟐ Answered May 14, 2025 at 3:24 MST

•I have a charger that is a bit lose but works fine.

•Last night I kept my phone for charging but it would not charge,so I pressed harder which worked.

•Next morning I opened my phone's and it said it has to factory reset. I don't ha e much data on it so I allowed it .

•When I kept my phone for charge again,this time it said it has moisture in the cable or the port.

•What should I do to remove the moisture?Should I blow inside it?

⟐ Commented November 23, 2021 at 6:51 MST

⟐ Answered March 01, 2021 at 9:32 MST