iFixit - Answers With Device "Saeco Royal"

Saeco Royal: Ventilate code on but won't purge

Sat, 16 Jan 2021 12:42:39 -0700

The machine will descale and rinse as it should. But when you use the hot water function to try and purge the lines it tries but acts as though it is air bound. Is there any specific sensor I need to check and or replace

Saeco Royal: Why only warm/cold coffee HELP!

Thu, 09 Apr 2020 15:02:55 -0700

“i have a saeco royal exclusive espresso machine, when its on power saving mode and i press the on button to make it start warming up sometimes it works very good, but most of the time it skips rinsing or warming up and says ready to use. and when it says its warming up and after a bit ready to use the coffee is only a warm. when i try to use the steam wand it say warming up and then overtemperature but the water is only warm. what is the problem anyways??”

Saeco Magic Deluxe SUP012: Is my saeco magic 220 or 110V . as I had kept this for 8years.

Sat, 11 Feb 2023 06:53:23 -0700

is my saeco magic 110 or 220V

⟐ Answered February 11, 2023 at 6:53 MST

Saeco Royal: After switch on: priming star for few seconds then E05 error

Sat, 15 May 2021 08:15:22 -0700

Dear,

Circuit priming message loops at beginning, then straigth away E05 error and asking to restart the machine, I did few times without sucess.

I opened the machine, and I can`t see any leak.

Any recommendation please?

My coffee machine is Royal gran crema

⟐ Commented May 15, 2021 at 8:15 MST

Saeco Royal: I’m getting miss brew and “water circuit priming” message

Wed, 10 Jun 2020 00:46:27 -0700

Hello,

I’m getting missbrew and “water circuit priming” message once in the wile. Sometimes machine can not start, getting prime cycle looped.

After cycle machine in empty pre grind coffe mode - problem goes away for a wile…

steps been taking :

thorogh clean up brew unit and nozzles,

descaling

…still have this issue.

Please help

Max

⟐ Answered June 10, 2020 at 0:46 MST

Saeco Royal: Brew part blocked, no more running

Thu, 14 Mar 2019 18:06:11 -0700

Hello. I have a Seco royal professional machine. Something with the brew part is damaged. Who can fix the machine. We are living in Dasmarinas, Cavite, Philippines. Thank you very much for your answer. Daniel Oesch

⟐ Answered March 14, 2019 at 18:06 MST

Saeco Magic Deluxe SUP012: My coffee machine is leaking

Tue, 04 Feb 2025 13:09:32 -0700

my coffee machine is leaking water onto my counter

Saeco Magic Deluxe SUP012: What does MS stand for?

Sat, 28 Sep 2024 07:20:39 -0700

My trouble shooter guide says that I need to replace the MS.

Grinder works, compactor works, frother works but fault light flashes red.

Saeco Royal: Why is grounded coffee at the bottom of my brewer

Sat, 10 Dec 2022 08:02:12 -0700

Coffee grounded at bottom of brewer

Saeco Royal: No coffee or water coming from the dispenser

Tue, 02 Nov 2021 09:10:11 -0700

Hello,

I have a Saeco Royal Professional, it was working fine.

When I power the machine on it comes ready.

When I press the coffee button, the machine goes through the whole cycle and there are no unusual sounds.

There is no water or coffee coming out of the dispensing unit.

The grounds end up in the container (dry) and the hot water goes to the drip tray.

Please see link below:

I have the same machine and with this exact same issue.

https://www.youtube.com/watch?v=EP1OKPf3...

Your advise will be appreciated.

Thank you in advance.

⟐ Commented November 02, 2021 at 9:10 MST

Saeco Royal: circuit priming message loops at beginning, but machine brews coffee

Tue, 04 Feb 2020 09:08:20 -0700

Circuit priming message loops at beginning, but machine brews coffee

When starting the machine after it was off for a while, it circles in a loop trying to prime the water pipe. It displays a message saying “circuit priming”. But it never stops unless manually hit the ESC button. After that, the machine works fine and can brew coffee, dispense hot water. Even after the machine went to sleep, turn it on, it will continue to work. This problem only occurs after the machine is off for a long time.

Unlike others can’t brew at all, this machine working perfectly after escape the starting priming. I cleaned the machine using factory liquids, oil removal tablet, and tried to inject hot water into a few openings. But no luck. Hope someone can help.

Thank you

Oliver H.