iFixit - Answers With Device "Saeco Intelia HD8752"

Saeco Intelia HD8752: Why is my machine leaking water. Why does it shut off

Wed, 09 Mar 2022 17:56:29 -0700

my machine leaks underneath, I can't find where the leak is coming from. I have cleaned it through and through, still leaks.

Today, it just shut down. Would not come on.

⟐ Commented March 09, 2022 at 17:56 MST

Saeco Intelia HD8752: My machine îs seeyng that my servis door îs open but îs closed properl

Sat, 25 Feb 2023 06:34:14 -0700

My door îs closed ok i check the microswiht and it's working ok but the error îs steel there and i wa

⟐ Commented February 25, 2023 at 6:34 MST

Saeco Intelia HD8752: Circuit board main transistor replacement

Mon, 20 May 2019 04:24:05 -0700

Hi,

Can anyone please provide me the reference of the main transistor on the circuit board of a coffee machine SAECO INTELIA HD 8751 ?

(The one with the heat dissipator attached)

Regards

Pablo

⟐ Answer accepted May 20, 2019 at 4:24 MST

Saeco Intelia HD8752: Say coffe wast contaner is full went it empty

Mon, 15 May 2023 14:45:05 -0700

Say coffe wast contaner is full went it empty

Saeco Intelia HD8752: Saeco Intelia HD8759 hissing noise and water leaking

Fri, 11 Mar 2022 10:58:37 -0700

Hi everyone

Im trying to figute whats wrong with my coffee machine so that I can attempt to fix it myself.

This machine is 5 years old all the regular maintenance has been done as per Saeco.

Lately I noticed some clear water on the right side of the machine under it seems to be accumulating inside on the right edge where the brew group is. I circled it in the picture. Couple months ago it started making this hissing noise, it seems to be coming from that water inlet, please see video. Any suggestions where this hissing sound is coming from. Everything on the machine works as it should.

I cleaned the brew group twice in the last couple of days greased, filter screen on the brew group cleaned as well. I didnt change o-rings yet until I figure out what parts I need so that I can order everything together.

Thank you

Saeco Intelia HD8752: How do I adjust

Sun, 30 Jan 2022 10:31:12 -0700

How do I adjust the volume of espresso express3d by the Saeco Intellia? Up until yesterday it was giving me 4 shots of espresso at a time. Now I can barely get one shot out at a time. I have tried adjusting the number of beans but to know avail.

Saeco Intelia HD8752: Error code 5 displayed

Mon, 01 Mar 2021 03:02:46 -0700

It displayed the wrench mark with numver 5 and quit working. Can you tell md what to do? Thanks.

Saeco Intelia HD8752: My coffee machine is showing error 4 and wont start

Fri, 29 Jan 2021 12:21:18 -0700

Hello, I have a Philips Saeco hd Syntia 8838 (unrelated to the one here but they share common things) and I can't find what is wrong with it. The error it's showing is error 4 and I have been googling without proper luck on how to address this.

Appreciate any help on fixing it.

Saeco Intelia HD8752: Saeco Intelia HD8752 dripping water from milk wand

Sun, 19 Jan 2020 06:42:26 -0700

My Saeco Intelia is dripping water from the milk wand instead of the coffee dispensing spout. when operating the steamer it would function properly, same if trying to dispense hot water out of the wand, however water would still leak out of the wand when trying to brew coffee.

I’ve tried descaling, as well as to open the machine and tighten the bolt that i considered related to the steamer (the one marked in red in the attached image).

Any help or idea would be highly appreciated…

Saeco Intelia HD8752: It grinds the coffee but will not Brew

Thu, 02 Jan 2020 02:20:46 -0700

My intellia grinds the coffee beans but will not send them to the brewer to make coffee

it send the grounded coffee to the ground container ?? Please help

Saeco Intelia HD8752: Dregs timer won’t reset

Tue, 30 Jul 2019 03:47:11 -0700

I can’t reset the empty dregs warning making the machine inoperable.

The obvious thing is the microswitch but I know it’s working, it’s just not doing what it’s supposed to do.

when I put the machine into service mode and go the the inputs page, the dregs microswitch doesn’t change the dregs state from N to Y when operated but I know it’s working because the door state changes. I know the door switch works because with the dregs in, the door state changes.

know these are linked somehow even though they’re on a separate wiring loom.

what on earth is going on?? Any advice will be very welcome.

Russ

Saeco Intelia HD8752: Steam sound at the machine start up

Wed, 17 Jan 2018 06:39:58 -0700

Hello, I just bought a new Philips coffee machine model ep 3510.

The machine is 2 weeks old.

My problem is that I started to hear a steam noise after start up the machine, and I think I feel that the steam not strong as it was in the beggining.

Im adding a video so you can hear this noise, can you please tell me if its ok?

thank for the helpers.

Here is the link with a video I made, you can hear it perfectly.

https://drive.google.com/open?id=1HYqctT...

Saeco Intelia HD8752: Milk carafe not working

Thu, 29 Sep 2016 12:49:04 -0700

my milk carafe will not insert all the way but the water dispenser works just fine