iFixit - Answers With Device "Robotic Vacuum Cleaner"

iRobot Roomba 5xx Series: Roomba keeps giving error 2 even when brushes are clean

Thu, 26 Feb 2026 02:08:05 -0700

have a 5xx ROOMBA keeps getting error 2 CLEAR BRUSHES. Brushes are clean and unie will work for maybe 10 - 15 minutes then get same message. when checking brushes they are clean. This keeps repeating.

⟐ Commented February 26, 2026 at 2:08 MST

iRobot Roomba 655 Pet Series: Why will my Roomba not charge?

Sun, 07 Jan 2024 10:34:37 -0700

I placed my Roomba on the charging station and left it there overnight. The next morning I tried to run the Roomba through a cleaning cycle, and it gave a low battery signal.

⟐ Answered January 07, 2024 at 10:34 MST

iRobot Roomba 4230: Vacuum will not go straight

Sun, 08 Jun 2025 04:08:25 -0700

I am having the "circle of death" problem with my Roomba Scheduler vacuum. Vacuum just turns around in a circle. Any solutions for this?

⟐ Commented June 08, 2025 at 4:08 MST

iRobot Roomba 5xx Series: When I turn my Roomba on, it doesn't go forward anymore.

Fri, 09 Apr 2021 15:57:19 -0700

Instead of going forward it spins around for a while and then starts to beep. Does anyone know how to fix this or what is causing it?

⟐ Answered April 09, 2021 at 15:57 MST

Neato Botvac D75: Error 3000 - Neato does not start moving

Tue, 19 Dec 2023 06:29:45 -0700

My Neato D85 has been working well. About 10 days ago, I changed its battery. It was working well until now. It gets ready to start but then stops and give me the message “press OK to continue (3000)”. I press OK and it tries to get ready but again stops and sends the same message.

What did I do? I cleaned its laser area with a cotton tip and pressured air too. Nothing. The disk moves though.

Any suggestions on what could happen but mainly how to fix it?

Thanks!

⟐ Answer accepted December 19, 2023 at 6:29 MST

iRobot Roomba 5xx Series: no power after fully charged & work for 4minutes then stop

Fri, 06 Jun 2025 07:26:14 -0700

after fully charged for days , the green light is on. then working good only for less than 5 minutes . the power button will turn red.then won't work till I recharged again.

⟐ Commented June 06, 2025 at 7:26 MST

Neato Botvac 80: Getting "Press OKAY to continue (3000)" error - help?

Tue, 23 Apr 2024 11:47:12 -0700

Error 3000 - Neato does not start moving

My Neato Botvac 80 has been working well. Today I changed its battery. It was working well until now. It gets ready to start but then stops and give me the message “press OK to continue (3000)”. I press OK and it tries to get ready but again stops and sends the same message.

What did I do? I cleaned its laser area with a cotton tip and pressured air too. Nothing. The disk moves though.

Any suggestions on what could happen but mainly how to fix it?

Thanks!

⟐ Answer accepted April 23, 2024 at 11:47 MST

Samsung NaviBot SR8855: circuit diagram or schematic for accu loading

Sat, 22 Jul 2017 10:15:46 -0700

The Bot Device cannot load his accu.

It does not recognized the contacts of the docking station. It still search and find the docking station well, but search endless the loading contacts.

I'm still good in electronics but do not have any schematics and don't kow any about the firmware/programms of a lot of microcontroller build in.

⟐ Commented July 22, 2017 at 10:15 MST

iRobot Roomba 650: Resistance in right wheel/"error 5"

Sat, 07 Jun 2025 10:19:39 -0700

I've been getting the "Error 5 right" message on my Roomba 650. The right wheel seems to have twice the resistance of the left wheel. I took out the wheel module, opened it up and cleaned everything out. The problem persisted so I ordered a new wheel module. Still no luck. Then I noticed something very odd: the wheel has normal resistance when it's out of the Roomba but as soon as I lower it into place the resistance immediately doubles. Even with the battery removed this happens. I've very meticulously cleaned out the wheel well and it makes no difference. I've also cleaned the optical sensors and tried doing the Spot/Dock reset. Nothing. Any ideas??

⟐ Commented June 07, 2025 at 10:19 MST

iRobot Roomba 595 Pet Series: Why is my irobot showing err 5 while on the charger

Mon, 29 Jan 2024 12:56:24 -0700

My irobot is detecting an err 5 what does that mean.?

⟐ Answered January 29, 2024 at 12:56 MST

Samsung POWERbot R7070: PowerBot R7040 Runs with disengaged powerbrush

Tue, 04 Jun 2024 17:23:15 -0700

my powerbot recently started to show this glitch where it actually runs pretending like it is cleaning but without actually vacuuming anything.(no powerbrush running) If i hit pause and then start again it starts and runs as expected. I’m not sure how often does this happen since it cleans mostly when I’m not home. I was only able to catch this on weekend.

⟐ Answered June 04, 2024 at 17:23 MST

iRobot Roomba 4100: will not turn on

Tue, 06 Dec 2022 23:15:40 -0700

charges, turns green,but will not turn and run

⟐ Commented December 06, 2022 at 23:15 MST

iRobot Roomba 805: What is charging error 5

Sat, 12 Oct 2024 06:10:48 -0700

why does the charging error 5 come on when my rumba 805 is charging

⟐ Commented October 12, 2024 at 6:10 MST

Samsung NaviBot SR8855: How to disassemble Samsung navibot SR8875?

Tue, 19 Dec 2023 06:30:29 -0700

Hi,

Would like to know how to remove the upper part of the navibot SR8875 ? I removed all screww but still locked in the front ?

If you want, you can also answer me in french (if you're french).

Thanks,

Matt

⟐ Answer accepted December 19, 2023 at 6:30 MST

iRobot Roomba i7: How to stop my i7 from spinning in circles in one place?

Thu, 05 Mar 2026 17:26:20 -0700

When I tell my i7 to vacuum, it comes off of the dock about 3 feet, and proceeds to just spin in circles. The wheels are clean, and the trash bin is empty. I'm not sure what else to try. Any help would be appreciated, we've only had this robot for 2 months.

⟐ Commented March 05, 2026 at 17:26 MST

iRobot Roomba 560: Why won't my Roomba turn on?

Sun, 27 Oct 2024 04:35:58 -0700

When I press the power button, the Roomba doesn’t move. The power button does not light up either. Help?

⟐ Commented October 27, 2024 at 4:35 MST

iRobot Braava 380t: Low area coverage and quick draining of Battery

Tue, 19 Dec 2023 06:30:56 -0700

I have a i Robot Braava 380 model mopping and sweeping machine .Of late it is covering only an area of 12X6 feet area .It is moving with in that area .and the battery also getting discharged in less than 20 minutes .

Please suggest a solution for both the problems

⟐ Answer accepted December 19, 2023 at 6:30 MST

iRobot Roomba 880: Roomba not picking up

Mon, 02 Dec 2019 08:02:24 -0700

I have had my roomba for about 1 1/2 years. It is significantly quieter than it used to be, and there is no air exhausting from the back vents. It’s still picking up larger debris but does not have much suction. I have cleared out debris from the rollers, filter, bin, and wheels and it didn’t help. Local vacuum repair won’t fix roombas. Any suggestions?

⟐ Answered December 02, 2019 at 8:02 MST

Roborock S8 MaxV Ultra: LiDAR won’t spin

Wed, 27 Nov 2024 08:03:10 -0700

The LiDAR will stop spinning. This seems to be a common problem with their design. Sometimes it’s debris that gets into the housing. Others the motor blows out. There are YouTube videos showing repairs on older models but none on this model. A video would be helpful as the design seems to be slightly different.

Also, any advice on upgraded replacement parts to fix the weak points would be helpful.

iRobot Braava Jet M6: Why is it not spraying liquid

Fri, 07 Nov 2025 17:01:46 -0700

machine is brand new, just out of the box, and not spraying liquid. Yes, the reservoir is full, battery charged, front of jet clean….

⟐ Commented November 07, 2025 at 17:01 MST