iFixit - Answers With Device "Roborock S Series"

Roborock S8 MaxV Ultra: LiDAR won’t spin

Wed, 27 Nov 2024 08:03:10 -0700

The LiDAR will stop spinning. This seems to be a common problem with their design. Sometimes it’s debris that gets into the housing. Others the motor blows out. There are YouTube videos showing repairs on older models but none on this model. A video would be helpful as the design seems to be slightly different.

Also, any advice on upgraded replacement parts to fix the weak points would be helpful.

Roborock S7: Roborock s7 - side brush keep falling while in use

Sun, 05 Jan 2025 06:38:16 -0700

Hey,
My Roborock S7 is 2 years old and lately, the side brush started to fall off during operation.
I keep finding it in different areas of the house, this is annoying.
When locking it back again, it feels like the screw is tight.
Any idea how to fix it?

⟐ Answered January 05, 2025 at 6:38 MST

Roborock S7: Two plastic parts are leftovers but where from?

Fri, 28 Nov 2025 11:16:07 -0700

I teared my vacuum cleaner (Roborock S7 later model) down (have to change the vibrating module) and in some point I turned it (vacuum cleaner) upside down these parts dropped out on the table. The size of the fallen out rectangular black plastic part is about 13x4x5 mm including some kind of similar notches on it's each end. There are two pieces not exactly the same looking parts but the sizes are the same. I might remember they falled out after removing the main brush module and then when I turned vacuum cleaner upside down there parts falled out. The model is the later one and European (Roborock S7) . Anyone who might know these parts locations in vacuum cleaner would you please tell me?

⟐ Commented November 28, 2025 at 11:16 MST

S7 MaxV Ultra: The Vibra-mop isn't working after replacement. Did I miss a step.

Mon, 09 Feb 2026 20:06:04 -0700

My S7 MaxV Ultra was giving a Error 27, Vibra-Mop Jammed. It was mopping, but I don't think it was raising the mop when it wasn't mopping. I found the replacement part on AliExpress. The part came in and seemed Identical to the old part. I found a youtube video on taking the robot apart. I replaced the part. Now when I run the robot it doesn't ever activate the mop. It washes the mop at the start of the session, but doesn't after finishing. I also don't see it lowering the mop and the floors aren't wet when it is running. I asked Roborock support but they just want me to send it in. Is there a process to get it to reset or calibrate the new module. Thanks for any responses.

⟐ Answered February 09, 2026 at 20:06 MST

Roborock S5: WiFi upgrade not compatible with Roborock S5

Fri, 01 Nov 2024 05:45:26 -0700

My WiFi router has been upgraded to 5G and is not compatible with my Roborock S5 anymore.. It only connects to a 2G.. Which I don't have... Is there any way to upgrade the software to get it to work?

⟐ Answered November 01, 2024 at 5:45 MST

Roborock S5: Clif Sensors error because of dust

Thu, 20 Nov 2025 18:39:46 -0700

How i can remove the clif sensors to clean them from the inside they have dust inside which i cannot clean
i tried to open the vaccum but i cant find how i can remove them to clean them

⟐ Answer edited November 20, 2025 at 18:39 MST

Roborock S7 Max Ultra: Is there a complete parts diagram for complete tear down and rebuild

Wed, 02 Oct 2024 17:11:18 -0700

Looking for manufacturers complete manual parts diagram in order to take out fan motor and properly reassemble with proper screws in their proper places

⟐ Answered October 02, 2024 at 17:11 MST

Roborock S8 MaxV Ultra: Resetting the S8 Max V Ultra

Tue, 10 Feb 2026 06:33:58 -0700

How do I reset the vacuum? The method described in the manual (press reset button while holding the power button ) doesn’t work.

Roborock S7 MaxV Plus: Is there a guide for this?

Mon, 09 Feb 2026 20:03:14 -0700

No guide on the link I can see

Roborock S8 MaxV Ultra: flexi arm won't spin

Thu, 05 Feb 2026 15:07:19 -0700

any fixes for the flexi arm not spinning?

Roborock S8 Pro Ultra: No dustbin or filter in the robot

Thu, 11 Sep 2025 02:39:50 -0700

I'm getting the classic error of no dustbin or filter in the robot which obviously there is I'm using original dust bin and filter from roborock, I've checked to see if the magnet is still in place on the dustbin which it is but still having this error any help would be great thanks!

Roborock S8 MaxV Ultra: Dustbin empty cycle stuck

Tue, 09 Sep 2025 08:28:53 -0700

I’m having a persistent issue with my Roborock S8 MaxV Ultra and hoping someone here has run into the same thing or has a fix.

Problem Summary:

Whenever the robot returns to the dock to auto-empty the dustbin, it gets stuck in the emptying cycle. Physically, I can hear the dock vacuum start and stop, but in the Roborock app, the emptying process never finishes. This causes two major problems:

The robot won’t start charging.
If it returns mid-cleaning, it won’t resume cleaning after docking.

Unplugged the dock and plugged it back in.
Cleaned all filters and checked for obstructions.
Power-cycled the robot.
Verified the dustbin cover is properly installed.
Checked for blockages in the dock and suction path.
Ensured the robot isn’t in Do Not Disturb (DND) mode, and verified every setting in the app.

I can manually stop the emptying process via the app, but doing so resets the cleaning cycle, meaning it won’t resume where it left off.
The dock’s status light doesn’t show any errors, and the vacuum seems to dock correctly.
I suspect the issue might be with the signal or sensor that tells the robot the emptying process is complete. It seems like the robot never gets that confirmation.

Roborock S7: My Roborock S7 not washing!

Tue, 15 Jul 2025 12:06:49 -0700

I have a problem with my Roborock S7 not washing. I fill the tank with water and it doesn't actually reach the mop. I assume there is some kind of blockage. How can I fix this? I tried cleaning the out from the water tank and also the out to the mop with needle but it didn't help.

S7 MaxV Ultra: Maintenance brush keeps getting stuck on left side. Error 42

Mon, 14 Jul 2025 17:53:54 -0700

I’m disassembled and clean the entire unit replaced the maintenance brush. I don’t know why it keeps kicking this error, any ideas?

Roborock S8 MaxV Ultra: Auto fill dock not draining

Thu, 17 Apr 2025 06:48:42 -0700

Can we get a tear down of the auto fill dock? My drain fitting appears to be leaking and will need to be repaired but would like to know how to get to it.

Roborock S6 MaxV: Wskaźnik zasilania miga na biało

Sun, 13 Apr 2025 20:04:57 -0700

Witam wie ktoś może co oznacza migający wskaźnik zasilania na biało?

Może ma ktoś instrukcje techniczną?

Przydały by się zdjęcia płyty głównej i opis poszczególnych elementów na niej a dokładnie gdzie znajduje się pamięć flash

Roborock S8 MaxV Ultra: Why my mop not wet?

Sat, 25 Jan 2025 06:25:52 -0700

Is seems like the unit can't pump the water from the tank in dock.

I can hear it try to pump. But can't hear any movement from the tank

Roborock S6 Pure: Unit is not running it keeps on blinking

Wed, 10 Apr 2024 00:39:47 -0700

Everytime i switch on my vacuum unit blue flashing light keeps on blinking and the said unit is not running. Please provide solution. Thank you