iFixit - Answers With Device "Roborock S7 Series"

Roborock S7: Roborock s7 - side brush keep falling while in use

Sun, 05 Jan 2025 06:38:16 -0700

Hey,
My Roborock S7 is 2 years old and lately, the side brush started to fall off during operation.
I keep finding it in different areas of the house, this is annoying.
When locking it back again, it feels like the screw is tight.
Any idea how to fix it?

⟐ Answered January 05, 2025 at 6:38 MST

Roborock S7: Two plastic parts are leftovers but where from?

Fri, 28 Nov 2025 11:16:07 -0700

I teared my vacuum cleaner (Roborock S7 later model) down (have to change the vibrating module) and in some point I turned it (vacuum cleaner) upside down these parts dropped out on the table. The size of the fallen out rectangular black plastic part is about 13x4x5 mm including some kind of similar notches on it's each end. There are two pieces not exactly the same looking parts but the sizes are the same. I might remember they falled out after removing the main brush module and then when I turned vacuum cleaner upside down there parts falled out. The model is the later one and European (Roborock S7) . Anyone who might know these parts locations in vacuum cleaner would you please tell me?

⟐ Commented November 28, 2025 at 11:16 MST

S7 MaxV Ultra: The Vibra-mop isn't working after replacement. Did I miss a step.

Mon, 09 Feb 2026 20:06:04 -0700

My S7 MaxV Ultra was giving a Error 27, Vibra-Mop Jammed. It was mopping, but I don't think it was raising the mop when it wasn't mopping. I found the replacement part on AliExpress. The part came in and seemed Identical to the old part. I found a youtube video on taking the robot apart. I replaced the part. Now when I run the robot it doesn't ever activate the mop. It washes the mop at the start of the session, but doesn't after finishing. I also don't see it lowering the mop and the floors aren't wet when it is running. I asked Roborock support but they just want me to send it in. Is there a process to get it to reset or calibrate the new module. Thanks for any responses.

⟐ Answered February 09, 2026 at 20:06 MST

Roborock S7 Max Ultra: Is there a complete parts diagram for complete tear down and rebuild

Wed, 02 Oct 2024 17:11:18 -0700

Looking for manufacturers complete manual parts diagram in order to take out fan motor and properly reassemble with proper screws in their proper places

⟐ Answered October 02, 2024 at 17:11 MST

Roborock S7 MaxV Plus: Is there a guide for this?

Mon, 09 Feb 2026 20:03:14 -0700

No guide on the link I can see

Roborock S7: My Roborock S7 not washing!

Tue, 15 Jul 2025 12:06:49 -0700

I have a problem with my Roborock S7 not washing. I fill the tank with water and it doesn't actually reach the mop. I assume there is some kind of blockage. How can I fix this? I tried cleaning the out from the water tank and also the out to the mop with needle but it didn't help.

S7 MaxV Ultra: Maintenance brush keeps getting stuck on left side. Error 42

Mon, 14 Jul 2025 17:53:54 -0700

I’m disassembled and clean the entire unit replaced the maintenance brush. I don’t know why it keeps kicking this error, any ideas?