iFixit - Answers With Device "ResMed CPAP"

ResMed AirSense 10: My unit is making a loud noise when I breathe in and out

Sun, 28 Dec 2025 02:26:02 -0700

How can I fix the loud noise when breathe in and out?

⟐ Answered December 28, 2025 at 2:26 MST

ResMed AirSense 10: Are Software Updates available?

Sat, 17 Jun 2023 13:18:11 -0700

ResMed CS reports that due to cellular updates, the CDMA can no longer connect to the cloud.

Is there a way to update either the device SW or the internal modem SW to restore connectivity?

Or a way to give it access to my WiFi so that it can "Phone Home"? ResMed says that I should ask my provider. But why should a respiratory therapist or doctor know that? ResMed should provide this support (or update) to their device.

⟐ Commented June 17, 2023 at 13:18 MST

ResMed AirSense 10: Very high leak rate on report screen

Wed, 24 May 2023 09:26:25 -0700

I get very high leak rates 40 to 70 L/min indicated with no mask seal alert and no warnings. Mask,tank,and tube all check good with no leaks

⟐ Answered May 24, 2023 at 9:26 MST

ResMed AirSense 10: What is this part called (or part#) found on the resmed AirSense10?

Fri, 30 Sep 2022 16:08:22 -0700

It is found inside body of the unit where the reservoir goes and mates with it and the removable/replaceable elbow. It is only accessible after disassembly and once removing the air pump. mine is old and covered in calcium which i am cleaning now but would like to replace as it makes whistling noises while im sleeping which wakes me up every night! THANK YOU!!!

⟐ Commented September 30, 2022 at 16:08 MST

ResMed AirSense 10: Resmed Aircurve 10 ASV has no power to device.

Thu, 13 May 2021 09:32:39 -0700

My Resmed CPAP Aircurve 10 asv won’t power on. Can I open it and check for blown fuse or other problem?

⟐ Commented May 13, 2021 at 9:32 MST

ResMed AirSense 10: What can I do to stop the gurgle sounds that happen off and on?

Sat, 25 Jun 2022 19:46:45 -0700

My c-pap gurgles near the end of a the sleep cycle. Not always, but often. Sometimes there is water in the tube sometimes not. It wakes my sleep and I can’t figure out how to stop it. I raised and lowered temperature and humidity levels.

⟐ Answered June 25, 2022 at 19:46 MST

ResMed AirSense 10: My humidifier heater isn't working.

Tue, 10 Sep 2024 14:41:35 -0700

My Airsense 10 is about 2 years old. My humidifier heater quit. I pulled the cover and checked the fuse and it is good. I don't have a schematic to check the test points. Could you give me some info on the heater?

Thanks!

⟐ Commented September 10, 2024 at 14:41 MST

ResMed AirSense 10: Quit working showing code06, what is wrong?

Sat, 13 Jan 2024 16:39:23 -0700

Res med 10 auto sense will not turn - shows code 06 - what does that mean?

⟐ Answer accepted January 13, 2024 at 16:39 MST

ResMed AirSense 10: My humidifier has stopped working have replaced it with a working t fu

Wed, 27 Apr 2022 23:04:15 -0700

my humidifier stopped working i replaced the t fuse plate the humidifier still says not working what gives

⟐ Answered April 27, 2022 at 23:04 MST

ResMed CPAP: Loud whine when working

Tue, 23 Apr 2024 14:30:51 -0700

My ResMed AirSense 10 CPAP makes a whining noise when it's on. The whine rises in pitch when I remove the nose pillows and as I breathe in and out, and the whine can be louder or softer on different nights. Do I need a new blower?

⟐ Answer edited April 23, 2024 at 14:30 MST

ResMed AirSense 10: Smartstart failing. Shuts off abruptly mid sleep.

Tue, 23 Apr 2024 14:29:40 -0700

Out of warranty. Exploring Diy repair possibilities.

It is harshly thunking off mid sleep. Wakes me up.

Also, doesn't start up promptly. Takes multiple really deep breaths to get it on.

I presume there is a sensor going bad or needs cleaning.

4 years 10 month old machine used daily. No repairs of any sort to date. Got it new.

⟐ Answer edited April 23, 2024 at 14:29 MST

ResMed AirSense 10: The Display Will Not Turn On

Tue, 21 Sep 2021 11:10:05 -0700

After 10 yrs of using my AirSense 10 CPAP, the display screen went dark and will not turn on. The CPAP as a whole ceased to function. How can I fix it? Does anybody have a schematic for this?

ResMed AirSense 10: Why isn't my machine shutting off after I take off the mask + 5 second

Sun, 02 Nov 2025 20:37:58 -0700

It used to power off 5 seconds after I took the mask off. Now it stays on until I use the button on the top to shut it off. This action started happening about 2 weeks ago.

⟐ Answered November 02, 2025 at 20:37 MST

ResMed AirSense 10: Where can I get a fuse for my Resmed airsense 10?

Sat, 12 Apr 2025 10:36:52 -0700

where can I get a fuse for my Resmed airsense 10?

⟐ Answered April 12, 2025 at 10:36 MST

ResMed AirSense 10: Why is it sounding like there's water in the line

Wed, 17 Sep 2025 05:26:47 -0700

Sounding like water in the line

⟐ Answered September 17, 2025 at 5:26 MST

ResMed AirSense 10: My machine says code 006 and isn’t working

Sun, 18 May 2025 12:58:35 -0700

When i go to turn it on a code appears that says 006

when I turned my CPAP on all it does is read code 006 and it doesn’t work

⟐ Edited by author May 18, 2025 at 12:58 MST

ResMed AirSense 10: What voltages power the blower motor?

Thu, 27 Feb 2025 03:23:11 -0700

I have two good CPAP blower motors for the ResMed AirSense 10 with their attaching wire plug. I don't want to plug them into a CPAP machine, I want to use them as independent blowers.

Problem: I can't find anywhere what voltages are applied to the Black, Yellow, and Orange wires. Does anyone know?

⟐ Answer edited February 27, 2025 at 3:23 MST

ResMed AirSense 10: What is amiss with my resmed airsense 10?

Tue, 03 Sep 2024 09:02:18 -0700

Every morning it’s water tank has white flakes in the remaining water.

⟐ Commented September 03, 2024 at 9:02 MST

ResMed AirSense 10: Need new humidifier fuse

Tue, 02 Apr 2024 16:55:35 -0700

I need a new humidifier fuse. What is the model number and how do I buy it?

⟐ Commented April 02, 2024 at 16:55 MST

ResMed AirSense 10: The Power cord is not keeping power to the unit. It is very positional

Thu, 15 Feb 2024 05:52:49 -0700

The power cord is very positional and I can barley touch the cord and it will turn off then I have to wiggle the cord to get it to come back on. Is there a fix for this that I can do?

⟐ Answered February 15, 2024 at 5:52 MST