iFixit - Answers With Device "ResMed AirSense 10"

ResMed AirSense 10: My unit is making a loud noise when I breathe in and out

Wed, 13 May 2026 08:22:12 -0700

How can I fix the loud noise when breathe in and out?

⟐ Answer edited May 13, 2026 at 8:22 MST

ResMed AirSense 10: Why is my resmed airsense 10 pumping air iregular?

Sat, 17 Jan 2026 23:36:12 -0700

My resmed airsense 10 is pumping air in a different pattern then it should. When I breath out it pumps air in.

⟐ Commented January 17, 2026 at 23:36 MST

ResMed AirSense 10: Resmed AirSense 10 motor SLEEVE?

Tue, 25 Nov 2025 20:52:57 -0700

Is there a part number (and do you sell) the Resmed AirSense 10 motor SLEEVE - the blue rubber motor cover shown here: https://youtu.be/WM6qBEnmMBI?t=340

ResMed AirSense 10: pressure suddenly rises, then shuts down, and shows error

Tue, 25 Nov 2025 14:50:35 -0700

During normal use, and typically during the first 10 to 20 minutes of operation, the CPAP pressure will suddenly rise greatly for 5 to 10 seconds and then the machine will shut down. The screen shows: Error: System fault, refer to user guide, Error 001. From doing a little research on the problem, I understand that this error refers to either a faulty blower motor, or pressure sensor. The blower sounds perfectly normal during usual operation, and it was replaced by Resmed service just over a year ago, so I'm inclined to think the problem is likely not the blower motor. Is there any way to determine if the problem is the blower, or the pressure sensor?

ResMed AirSense 10: How do you get to the setting mode to change machine pressure settings

Thu, 13 Nov 2025 07:13:32 -0700

How do you access the settings mode to change the machine pressure settings?

ResMed AirSense 10: Why isn't my machine shutting off after I take off the mask + 5 second

Sun, 02 Nov 2025 20:37:58 -0700

It used to power off 5 seconds after I took the mask off. Now it stays on until I use the button on the top to shut it off. This action started happening about 2 weeks ago.

⟐ Answered November 02, 2025 at 20:37 MST

ResMed AirSense 10: I can not receive data from previous night's sleep

Tue, 30 Sep 2025 11:20:07 -0700

Precious night's sleep activity can not be obtained

ResMed AirSense 10: Why is it sounding like there's water in the line

Wed, 17 Sep 2025 05:26:47 -0700

Sounding like water in the line

⟐ Answered September 17, 2025 at 5:26 MST

ResMed AirSense 10: Loose part in Machine

Sun, 20 Jul 2025 16:01:23 -0700

Part identified as PA 26B has come loose and is rattling around inside my CPAP. What is this part and where is it to be attached?

ResMed AirSense 10: My machine says code 006 and isn’t working

Sun, 18 May 2025 12:58:35 -0700

When i go to turn it on a code appears that says 006

when I turned my CPAP on all it does is read code 006 and it doesn’t work

⟐ Edited by author May 18, 2025 at 12:58 MST

ResMed AirSense 10: Output pressure seems to have dropped?

Fri, 02 May 2025 13:48:39 -0700

Output pressure seems to have dropped? How can I get it checked.

ResMed AirSense 10: Where can I get a fuse for my Resmed airsense 10?

Sat, 12 Apr 2025 10:36:52 -0700

where can I get a fuse for my Resmed airsense 10?

⟐ Answered April 12, 2025 at 10:36 MST

ResMed AirSense 10: What voltages power the blower motor?

Thu, 27 Feb 2025 03:23:11 -0700

I have two good CPAP blower motors for the ResMed AirSense 10 with their attaching wire plug. I don't want to plug them into a CPAP machine, I want to use them as independent blowers.

Problem: I can't find anywhere what voltages are applied to the Black, Yellow, and Orange wires. Does anyone know?

⟐ Answer edited February 27, 2025 at 3:23 MST

ResMed AirSense 10: Plate cold not heating

Wed, 22 Jan 2025 10:11:57 -0700

I’ve changed the fuse. I have done everything and I tested my machine The heating plate is cold after even 30 minutes running my machine, and the water stays completely full all night.

⟐ Edited by author January 22, 2025 at 10:11 MST

ResMed AirSense 10: My humidifier heater isn't working.

Tue, 10 Sep 2024 14:41:35 -0700

My Airsense 10 is about 2 years old. My humidifier heater quit. I pulled the cover and checked the fuse and it is good. I don't have a schematic to check the test points. Could you give me some info on the heater?

Thanks!

⟐ Commented September 10, 2024 at 14:41 MST

ResMed AirSense 10: What is amiss with my resmed airsense 10?

Tue, 03 Sep 2024 09:02:18 -0700

Every morning it’s water tank has white flakes in the remaining water.

⟐ Commented September 03, 2024 at 9:02 MST

ResMed AirSense 10: Smartstart failing. Shuts off abruptly mid sleep.

Tue, 23 Apr 2024 14:29:40 -0700

Out of warranty. Exploring Diy repair possibilities.

It is harshly thunking off mid sleep. Wakes me up.

Also, doesn't start up promptly. Takes multiple really deep breaths to get it on.

I presume there is a sensor going bad or needs cleaning.

4 years 10 month old machine used daily. No repairs of any sort to date. Got it new.

⟐ Answer edited April 23, 2024 at 14:29 MST

ResMed AirSense 10: Need new humidifier fuse

Tue, 02 Apr 2024 16:55:35 -0700

I need a new humidifier fuse. What is the model number and how do I buy it?

⟐ Commented April 02, 2024 at 16:55 MST

ResMed AirSense 10: Machine cut off every night at the same time

Fri, 01 Mar 2024 12:11:10 -0700

Machine turns off while I'm sleeping every night same time

ResMed AirSense 10: The Power cord is not keeping power to the unit. It is very positional

Thu, 15 Feb 2024 05:52:49 -0700

The power cord is very positional and I can barley touch the cord and it will turn off then I have to wiggle the cord to get it to come back on. Is there a fix for this that I can do?

⟐ Answered February 15, 2024 at 5:52 MST