<![CDATA[iFixit - Answers With Device "Razer Naga Expert MMO"]]> https://www.ifixit.com/Answers/Device/Razer_Naga_Expert_MMO?rss=yes en-US Thu, 14 May 2026 13:39:25 -0700 <![CDATA[Razer Naga Expert MMO: Razer naga side panel is not always responding]]> Hi!
I've been using this mouse for about 10 years, but over the past months the 5 and 1 button in the side panel do not respond well and sometimes require me to click them several times before they respond.

I opened it today to see if there could be any dust or grime under the buttons, but it was decently clean. I cleaned out some grime from the corner of the 12 button, saw if i could get anything lose with a fine vinyl paint brush and air dusted it without any results.

Is there anything else i can do to repair the panel or would i have to find a replacement part? I'm having a hard time finding replacements for it, so some sources would be appreciated! I live in Norway, but also have an address i can use in the US, though i won't see that person before december.

Thank you for reading and any answers!

]]> https://www.ifixit.com/Answers/View/899555/Razer+naga+side+panel+is+not+always+responding https://www.ifixit.com/Answers/View/899555 Sat, 10 May 2025 12:07:40 -0700 <![CDATA[Razer Naga Expert MMO: Physical impact-event in the past affecting tracking]]> So a few years ago I watched in horror as a kid used my Limited Edition Green Razer Naga and its 6 foot cord as a jump-rope. I’m here now, so obviously it didn’t go well. Everything worked fine except the tracking, and I could hear a rattling noise in it. Today I took it apart, and a small translucent dome came out. There’s another translucent piece on the motherboard, and I’m wondering what it is. On the motherboard piece, I can see a small copper item. I’m tempted to either hot glue the now disconnected item back on, or based on my assumption that the item is solid glue, I might just glue it. Again, everything else works on the mouse.

Update (01/01/2021)

Update: The translucent thing is just an LED. My search continues.

Update (01/01/2021)

Okay so new question. The LED there is off, everything else should is on. Something around that area isn’t working and I’ll keep you posted if I find out what it is.

Block Image

Update (01/02/2021)

It’s working. I have no idea what I did but if anyone has this issue, just touch things. Touch the sauder because that’s all I can think that I did and the tracking is working.

⟐ Edited by author January 02, 2021 at 15:30 MST

]]> https://www.ifixit.com/Answers/View/673378/Physical+impact-event+in+the+past+affecting+tracking https://www.ifixit.com/Answers/View/673378 Sat, 02 Jan 2021 15:30:00 -0700