iFixit - Answers With Device "Razer Mouse"

Razer Viper Ultimate: Why isn’t the right click not going down

Mon, 09 Mar 2026 15:47:52 -0700

Can anyone help?

Razer Viper Mini: What kind of switches does this viper mini uses?

Mon, 29 Dec 2025 04:40:43 -0700

Hello, I want to replace the switches on this Viper mini because some buttons are having issues when clicking them, I want to know what kind of switches the scroll wheel encoder and the scroll wheel click, and what kind of switches can I use for the side button too.

⟐ Commented December 29, 2025 at 4:40 MST

Razer Naga Trinity: The number keys on my numeric panel stop working randomly, help?

Fri, 26 Dec 2025 12:13:21 -0700

The number keys on my numeric panel stop working randomly, I can be typing or switching weapons in-game normally and then the entire panel stops working for no apparent reason, please help.

-How to open the panel for maintenance?

-Could it be software related?

-Is it a known issue? Are there any fixes for it?

⟐ Answered December 26, 2025 at 12:13 MST

Razer DeathAdder V2 Pro: The mouse wheel scrolls in the wrong direction

Wed, 26 Nov 2025 17:12:17 -0700

The mouse wheel sometimes lags and scrolls in the wrong direction.

Razer Basilisk X Hyperspeed: How to know this component on the PCB

Thu, 13 Nov 2025 23:16:53 -0700

Recently my mouse is not working. While using it, the mouse shuts down. I tried to turn off and on the mouse, it was working for a second until the i noticed the sensor began to fade and eventually turn off. I opened the mouse and saw this burnt part on the PCB. I want to know what part is it and its value so i could replace it if it was really the problem. I tried with a new battery and the problem still occurs.

Razer Naga V2 Pro: It's tracking it not working.

Thu, 09 Oct 2025 20:14:52 -0700

Mouse is detected in PC app. I am able to change its RGB using PC. It's red LED light is blinking but mouse curydoes not move.

Razer Deathadder Chroma: How can I replace button switches?

Thu, 14 Aug 2025 23:36:23 -0700

My switch on the right click button got broken. I can’t find a replacement on any site. How can I buy one?

⟐ Commented August 14, 2025 at 23:36 MST

Razer Basilisk V3: How to find a replacement cable?

Mon, 07 Jul 2025 21:19:49 -0700

My cat chewed through the cord for this mouse and ive spent two years off and on trying to find a replacement. Ive pulled several cables from donor mice but the connector on the board is too small to fit any of them (even one I pulled from a different Razer mouse)

Every time I try to use Google I end up getting replacements for the v3 Pro (which is a wireless mouse so its just a basic type c cable). I even ordered a cord on amazon that said it would be compatible but it was the same size as every other mouse I've tried. I also tried reaching out to Razer but they dont have a public phone or email and the tickets I've sent in have never gotten a response.

⟐ Commented July 07, 2025 at 21:19 MST

Razer Orochi V2: The device disconnects and reconnects constantly

Thu, 29 May 2025 23:16:27 -0700

My device keeps disconnecting and reconnecting and makes it impossible to move my mouse. I have downloaded the drivers and they say everything is working correctly

⟐ Commented May 29, 2025 at 23:16 MST

Razer Naga Expert MMO: Razer naga side panel is not always responding

Sat, 10 May 2025 12:07:40 -0700

Hi!
I've been using this mouse for about 10 years, but over the past months the 5 and 1 button in the side panel do not respond well and sometimes require me to click them several times before they respond.

I opened it today to see if there could be any dust or grime under the buttons, but it was decently clean. I cleaned out some grime from the corner of the 12 button, saw if i could get anything lose with a fine vinyl paint brush and air dusted it without any results.

Is there anything else i can do to repair the panel or would i have to find a replacement part? I'm having a hard time finding replacements for it, so some sources would be appreciated! I live in Norway, but also have an address i can use in the US, though i won't see that person before december.

Thank you for reading and any answers!

Razer Basilisk V3: Simple way to increase pressure required to activate mouse buttons?

Thu, 24 Apr 2025 15:28:56 -0700

Does anyone know of a simple way to increase the amount of pressure required to activate the optical switches on Razer's various peripherals? I'm always firing off desk pops due to damage in the tendons in my lower arms mostly because the older I get, the more difficult it becomes to keep my middle finger still when moving my index fingers. So a heavier spring in the primary mouse buttons would make life a lot easier. Unfortunately, making a tiny spring like and getting it to temper right without it becoming too brittle would be a pretty big pain in the a55. So I was just wondering if anyone in roughly the same situation as I am has come across a decent solution in increase that rebound pressure in the switches.

⟐ Answered April 24, 2025 at 15:28 MST

Razer Basilisk X Hyperspeed: Sensor issue , not working

Thu, 24 Apr 2025 03:30:34 -0700

Sensor issue , mouse not working

Razer Naga Trinity: Why does my DPI randomly shoot up to maximum on its own?

Fri, 03 Jan 2025 22:10:02 -0700

Hello,

I have a weird situation where my Naga Trinity shoots up to max DPI on its own. The only way to fix it is to manually cycle through Razer Synapse profiles to "change" the dpi settings back to how I like them.

I believe this is a hardware issue as it happens even if all my profiles are set to the same DPI value, if I have no profiles enabled, or even if Synapse is uninstalled. It happens on Synapse 3 and 4, and happens both in games and on my desktop.

Razer tech support was unable to diagnose the issue. I have repaired PS5 and Switch joysticks, so I'm confident I could replace something inside a mouse. Any help would be appreciated. THank you!

Razer DeathAdder V2: Mouse Razor DeathAdder Rubber

Tue, 24 Dec 2024 10:22:57 -0700

My mouse has wear and tear on both sides, left and right. There is some form of rubber, this has worn away. This Mouse is perfect, (electronic and mechanical) but is it possible to replace the rubber sides ?

⟐ Answered December 24, 2024 at 10:22 MST

Razer Deathadder Chroma: Why does my scroll wheel keep skipping when scrolling?

Wed, 18 Dec 2024 13:26:59 -0700

My scroll wheel keeps skipping up and down when I use it and I am asking how I can fix it or why this happens.

Razer DeathAdder V2 Pro: What is the encoder size?

Fri, 06 Dec 2024 06:23:43 -0700

I've been having some issues when scrolling so I wanted to replace the encoder with a new one but I don't know the size of the encoder.

⟐ Commented December 06, 2024 at 6:23 MST

Razer Mouse: Razer Orochi not working at all

Mon, 01 Jul 2024 16:09:39 -0700

Hello I recently purchased a razer orochi v2 from a liquidation store and it will connect to my laptop , but will not function. The cursor moves extremely slowly and any clicks take seconds to be recognized not sure what could be the issue.

⟐ Answered July 01, 2024 at 16:09 MST

Razer Basilisk X Hyperspeed: Broken dongle idk where is the fault

Fri, 21 Jun 2024 11:56:00 -0700

My 2.4 GHz dongle is slightly bent. A couple of days ago, whenever I inserted it into the USB port, I would hear the usual connection sound. However, now I don't hear the sound anymore.

I opened the USB receiver and examined the PCB for any visible damage, but I couldn't find anything out of the ordinary with the naked eye.

If possible, could someone help identify the fault? I'd also be curious to know the names of all the ICs on the board.

PFA PCB Images

Razer Naga Hex v1: Why wont my Razer Naga Hex v1 mouse turn on when connected

Sun, 02 Jun 2024 18:45:39 -0700

The mouse used to run well and then one day it just didnt connect with my laptop anymore and still doesnt and i dont know what caused it, just nothing happens

⟐ Commented June 02, 2024 at 18:45 MST

Razer Deathadder Chroma: Why is my mouse not working and overheats when plugged in?

Sat, 04 May 2024 14:32:18 -0700

I plugged in my mouse on the back of the PC and turn it on, it brought me to the screen said that the PC is going to shutdown to prevent damaging the mainboard, also if i plug it on the back of the pc when its on, anything USB related that is plugged on the back of the computer stopped working unless i restart the PC. pls help

⟐ Answered May 04, 2024 at 14:32 MST