iFixit - Answers With Device "Pet Supply"

DogWatch Hidden Fence: How can I find/detect where the loop/wire is broken?

Mon, 22 Apr 2019 00:30:37 -0700

This is a electric pet system where the wire is buried under ground (~6 inches), starting from the transmitter and is looped around your yard as a boundary line back to the transmitter. The transmitter sends a coded digital FM radio signal through the boundary wire and is picked up by the pet's collar when the pet gets too close to the boundary. I know I have a break because of the indications on the transmitter. It's very expensive to have the company send a rep out to find the break. I tried using a transistor radio with no luck. Then I have to fix the wire once I find it...yikes!

⟐ Answer deleted April 22, 2019 at 0:30 MST

Furbo Dog Camera: What part do I need to replace for the USB power jack PCB?

Sun, 17 Nov 2024 11:30:20 -0700

I followed the guide on here to remove the broken usb powerjack PCB but I’m not sure where to buy a replacement. I couldn’t find one on Amazon. Thanks.

⟐ Commented November 17, 2024 at 11:30 MST

Petcube Bites: Why is the launching mechanism not flinging treats?

Fri, 09 Jun 2023 06:52:50 -0700

I have the black Petcube bites. The wheel is spinning to drop treats into the launching compartment but the little paddle that launches the treats out is not moving at all. It sounds like a gear keeps spinning and then just stops. There is no treats stuck behind the flinger from the bottom trap door. I am using the recommended Blue Buffalo Blue bits dog treats.

⟐ Answered June 09, 2023 at 6:52 MST

Fi Series 2: Fi Series 2 housing diagram

Wed, 09 Apr 2025 17:06:34 -0700

The plastic bits that are supposed to support the clips on either side of the housing are broken (my dogs like to tussle). I've wired the two ends of the collar to each other to keep it from falling off, but the housing still comes loose (only one side is broken, so it sort of hinges open from the intact side.) I'd like to drill through the housing and wire the collar directly, in place of the clip, Anyone have a diagram of the internals so I can be sure I'm not drilling into anything important?

⟐ Commented April 09, 2025 at 17:06 MST

DogWatch Hidden Fence: How do I know if my collar is working?

Thu, 20 Nov 2025 19:38:53 -0700

how do I know if the dog collar is working, it makes a beat, but I’m not sure it is providing a shock.

⟐ Answered November 20, 2025 at 19:38 MST

Pet Supply: Old Oster pro corded nail grinder needs a replacement speed control

Tue, 28 Jan 2025 00:49:52 -0700

What specs do I need to find out in order to look for a replacement generic speed control assembly for this rotary tool? They don't make parts for it.

⟐ Answered January 28, 2025 at 0:49 MST

Petcube Bites: Petcube treats Launching too fast

Thu, 31 Oct 2024 09:46:32 -0700

My petcube bites dispenses treats but when they fling out, it flings so fast that they land very far and so fast it hurts it your close by.

⟐ Answer accepted October 31, 2024 at 9:46 MST

Fluval 306 Canister Filter: Flu-val impeller making rattling noise

Tue, 06 Aug 2019 11:20:40 -0700

Changed all moving parts on Flu-val impeller still rattling.

⟐ Commented August 06, 2019 at 11:20 MST

Dog Harness: مقود القط كيف يمكن توسعته ليناسب حجمها كلما كبرت

Thu, 15 Feb 2024 17:22:23 -0700

مقود القط كيف يمكن توسعته ليناسب حجمها كلما كبرت

Translate Arabic - English

The cat's leash can be expanded to fit its size as it grows

⟐ Commented February 15, 2024 at 17:22 MST

Aquarium: The meaning of code EO

Thu, 15 Feb 2024 00:28:36 -0700

Error code E0 shows when I plug my aquarium

⟐ Commented February 15, 2024 at 0:28 MST

Furbo Dog Camera: Which part exactly do I need to buy to replace embedded cellular ant.

Tue, 01 Nov 2022 21:38:13 -0700

I have my Furbo taken apart because my dog decided he didn’t want to be on film… well. He broke the connection for wifi/Bluetooth (I believe that’s what it is) I think the name is embedded cellular antenna. He had ripped the wire from antenna to device. I am just looking to replace the small chip / wire. I can’t find exact item name!!?? I hope this makes sense. Thank you

Fluval 306 Canister Filter: air in he intake hose while plugged in

Sun, 09 Feb 2020 21:23:12 -0700

I cleaned out the pump and plugged it back in and it started puping fine but I accidently moved the intake hose out of the water and now I cannot get it to flow

DogWatch Hidden Fence: The invisible dog fence alarm is delayed. Is it broken?

Tue, 23 Apr 2019 11:24:06 -0700

I have an invisible underground fence for my dogs. The alarm is supposed to sound when the line is broken. I came home one day and the alarm was on. I unplugged the system and plugged it back in and no alarm…. but then with in about 5 minutes the alarm went off again. I tried again, unplugged it, plugged it back in, and no alarm for about 20 minutes. Why would there be a delay? Maybe I don’t have a broken line and I have a broken main hub. Anyone have a theory on why there would be a delay in the alarm like this??? Thanks in advance!

DogWatch Hidden Fence: Help needed . Signl keeps beeping. Can't stop annoying alarm. Help.

Sat, 28 Apr 2018 13:51:02 -0700

My dog fence alarm in the house keeps beeping. Can't turn it off. It is loud and annoying and I worry my dog can get through the fence. Help!

⟐ Commented April 28, 2018 at 13:51 MST

Fluval 306 Canister Filter: I can't get the top to close all the way on one side!

Mon, 08 May 2017 15:24:55 -0700

I just replaced the seal ring because I had a leak - but now I can't get the filter closed properly and it's driving me crazy! It is on correctly - the imprint lined up and all of that. I can find absolutely no obstruction or anything that looks different than the other side.

It is the side with the primer. I can get the other end down tight, but the primer end - no matter how hard I push it down - is about 1/8 of an inch too high for the handle to latch at the top. Losing my mind! Any help appreciated.

Marineland Emperor 400 Power Filter: marineland 400 emperor filtration bio wheel

Thu, 07 Jan 2016 09:30:29 -0700

Hi! How often do I have to replace the spray bar, I have it for about two years now, its kept making the noise, I took it apart and cleaned, but problem still occurred. Thank you.