iFixit - Answers With Device "Palm Treo 680"

Palm Treo 680: Is any similar lcd for palm treo 680 from nokia phone

Thu, 19 Jun 2014 19:18:24 -0700

is any similar lcd for palm treo 680 from nokia phone

⟐ Answer accepted June 19, 2014 at 19:18 MST

Palm Treo 680: The touchscreen do not have ligth and battery do not charge.

Sun, 22 Jan 2017 18:14:31 -0700

The screen show information but whitout light, and the smarthphone do not charge the batery, I quited the screen and put other but the problem persist, I buy a new batery and it do not charge too. this 2 problem appear at the same time.

⟐ Answer edited January 22, 2017 at 18:14 MST

Palm Treo 680: batterie pour / battery for - palm treo 680

Wed, 21 Aug 2024 19:23:04 -0700

Bonjour, Je suis à la recherche d'une batterie (PALM TREO 680), une idée ?

Hello, I am looking for a battery (PALM TREO 680), any suggestion?

Merci par avance, Thanks in advance.

⟐ Commented August 21, 2024 at 19:23 MST

Palm Treo 680: How does one unlock it

Wed, 12 Jul 2017 22:57:47 -0700

How does one unlock a Palm Treo 680? My sister was given one

⟐ Commented July 12, 2017 at 22:57 MST

Palm Treo 680: No service (no GSM signal from any carrier)

Thu, 21 Jan 2016 02:46:24 -0700

I have a Palm Treo 680 which has developed a strange problem.

It shows "No service" instead of the network operator name.

This is different from actually not having signal from my network (like when hiking the mountains), because then it would show "No signal, SOS only" if it still picks up other GSM networks.

The problem happens in the city, so it's the phone, not the network.

The problem is intermittent, because it depends on the following:

- turning GSM off and then back on

- mechanichal shock (hitting, dropping the phone; small shock)

- pressing and slightly deforming the casing on the back above the speaker

I am experienced with dismantling the phone as I changed the case and digitizer already. I opened the phone and discovered that fiddling with the contacts to the metal plate on the back, above the speaker sometimes helps.

I cleaned the contacts, it helped marginally, after a day or so the problem was back.

I used a bit of sand paper on the PCB and on the metal plate contacts. Solved the problem for a couple of hours.

I soldered the metal plate contacts to the PCB. Solved the problem for about 3 days.

Then the problem returned.

Now I get signal just by chance, couldn't establish any rule, apparently random luck.

⟐ Commented January 21, 2016 at 2:46 MST