iFixit - Answers With Device "Other Coffee Maker"

Dolce Gusto Genio: Unit does not discharge water, even without a pod in place.

Fri, 13 Feb 2026 07:08:56 -0700

Tried cleaning the jet - no improvement.

Sounds like the pump is working. Maybe an air-lock in the water system?? Unit has been idle for at least one month.

Can someone provide detailed steps for identifying and correcting a possible air-lock? This would be helpful in narrowing down causes for no water discharge.

⟐ Commented February 13, 2026 at 7:08 MST

Dolce Gusto Majesto: Stops working straight after starting

Mon, 26 Jan 2026 12:29:47 -0700

So we have a dolce gusto machine that stops (turns off) after a few seconds of working. It heats up water comes out everything works as normal but it still just shuts down. We've cleaned it checked the needle everything seems ok but it still stops every time. Any ideas?

Other Coffee Maker: No steam came out

Tue, 30 Dec 2025 02:08:09 -0700

The steam can't out

⟐ Commented December 30, 2025 at 2:08 MST

Dolce Gusto Drop: Desarme de cafetera dolce gusto drop

Sun, 27 Jul 2025 03:25:28 -0700

Como desarmar cafetera dolce gusto drop

⟐ Answered July 27, 2025 at 3:25 MST

Ambiano CM-202: Why is blue light flashing?

Tue, 26 Nov 2024 09:15:35 -0700

Flashing blue light alternating between 8 oz and 16 oz with a solid (non-flashing) green light. Coffee marker not working.

Dolce Gusto Majesto: No water coming + doesn't close over capsule

Wed, 23 Oct 2024 02:38:01 -0700

Hello,

My Dolce Gusto Piccolo machine doesn't inject water, and even if we want to put a plastic capsule for example, it doesn't close.

⟐ Answered October 23, 2024 at 2:38 MST

Dolce Gusto: Machine unexpectedly stopped working, button doesn’t light up at all

Sat, 05 Oct 2024 11:48:44 -0700

I have a KP 1006 machine, and at some point, it just stopped turning on. The button doesn’t light up. I checked the fuses at the input – both have continuity. When connected to electricity, the heater starts heating up. Could you tell me what else could be the problem?

⟐ Commented October 05, 2024 at 11:48 MST

Dolce Gusto Oblo: The machine switches off when starting

Fri, 20 Sep 2024 09:14:07 -0700

The heating element works. The pump works fine with cold water, but when I switch over to hot, the whole machine shuts down after about 1 second. I have tried descaling, although not easy to do with so short pump bursts. Any ideas?

⟐ Answer accepted September 20, 2024 at 9:14 MST

Dolce Gusto: Not working, no sound from pump.

Wed, 14 Aug 2024 01:31:56 -0700

My Dolce gusto machine switches on but there is no longer any sound from the pump and it's not drawing water. Eventually the light goes from green to red without producing any coffee. We live in a soft water area so it's not timescale, there wasn't any issues with it yesterday.

⟐ Commented August 14, 2024 at 1:31 MST

Ambiano CM-202: Issue with release of water/steam pressure

Tue, 04 Jun 2024 03:27:15 -0700

I have an Ambiano Expresso maker, model - GT-EMG-01-UK, and I have an issue with it. When I have used the Steam Wand to warm/froth the milk and turned the and off the machine will not go back to the hot water/ brewing coffee mode. I have to turn the machine off and wait for several minuets then turn it on again for it to work properly. The warrenty ran out on 14th April this year.

Can you help with this issue please.

Franke A300: Can anyone tell me what this is?

Thu, 02 May 2024 11:15:40 -0700

Does anyone know what part of this bean to cup machine this is? It is the clear tank behind the hoses. It looks like it is dripping from that tank into the drip tray and may need cleaning/replacing.

Thanks

⟐ Answered May 02, 2024 at 11:15 MST

Presto 0282202: '60s GE percolator, heating element defunct/broken.

Thu, 16 Feb 2023 09:18:52 -0700

This percolator is a 230v (EU) appliance. Research showed heating element at bottom will not work- causing major short, main fuse in house blows instantly. Looking for replacement part.

dolce gusto majesto: Recieving error of injector blocked?

Fri, 18 Mar 2022 13:01:11 -0700

Hi Guys,
I have the above Dolce Gusto machine, and it is saying the injector is blocked.
I have had it a couple of years, and never had the pod bin which apparently holds a tool that can unblock the injector.
Has anyone else had the same issue and has been able to resolve the issue without the specific tool?

Many Thanks

⟐ Answer edited March 18, 2022 at 13:01 MST

Kitchen Gourmet XQ-673H: My pot drips like crazy when I pour the coffee

Sat, 27 Nov 2021 21:46:14 -0700

I use this product all the time. However, when I pour my coffee it pours all over the counter, I usually pour over the sink because of this ….but the pot is already small and i hate the mess not to mention the mess it makes.

Any suggestions? I have tried to pour slow and I have checked it for cracks or chips. None

⟐ Commented November 27, 2021 at 21:46 MST

Dolce Gusto Genio: Stoped working at all

Tue, 27 Jul 2021 01:15:03 -0700

My dolce Gusto stoped working when connected to electricity. Light does not even appear

⟐ Commented July 27, 2021 at 1:15 MST

Dolce Gusto Genio: How to repair dislodged handle

Thu, 11 Feb 2021 18:32:46 -0700

The handle on my Nescafe Dolce Gusto Genio has come lose and no longer moves the portion that pierces the capsule. Can this be repaired? If so what tools do I need?

⟐ Commented February 11, 2021 at 18:32 MST

Dolce Gusto Melody: Melody Dolce Gusto Coffee Pod not being properly pierced

Sat, 14 Nov 2020 10:57:19 -0700

Piercing mechanism appears to have shrunk back into casing, so water does not enter pod. Can piercing mechanism be repaired/replaced?

⟐ Answered November 14, 2020 at 10:57 MST

Petra KM 31.17: Coffee filter is lost

Tue, 15 Sep 2020 16:59:48 -0700

I have lost the coffee filter. The loose part to be used with filter coffee. Model is KM 31.17. Where can I buy this in the Western Cape South Africa?

⟐ Answered September 15, 2020 at 16:59 MST

Dolce Gusto Melody: Power button blinks red and then stops.

Tue, 25 Aug 2020 04:30:12 -0700

Hi,

My machine started having this weird behavior, so when I press the button it starts blinking red till the machine heats up then it should switch to green, but now when I press it, it just blinks red then stops, if I press it again it blinks again red and then stops.

I can only manage to make it work if I keep pressing the button till it starts blinking green.

Do you know if it’s some electronic that needs a fix?

Thanks.

Dolce gusto: Toroidal inductor and fuses

Sat, 20 Jun 2020 10:58:27 -0700

Hi there. I have problem with power pcb of my dolce gusto majesto. One of inductors is broken and my question is how to find out what kind of I have to order? Also there are burned “fuses" in traces. How can I fix them with copper wire?

⟐ Edited by author June 20, 2020 at 10:58 MST