iFixit - Answers With Device "Nespresso inissia"

Nespresso inissia: After power up both lights keep blinking forever

Sat, 03 Aug 2024 02:48:02 -0700

They never stop, onless you do it manually pressing both buttons. Actually yoy can make a warery expresso, pressing stop when your cup is near filling.

⟐ Commented August 03, 2024 at 2:48 MST

Nespresso inissia: Will not stop blinking

Fri, 14 Apr 2023 06:22:06 -0700

The machine will not stop blinking. Pressing it for 3 seconds or more does nothing. All it does is blink.

⟐ Commented April 14, 2023 at 6:22 MST

Nespresso inissia: The pump cuts out after a few seconds. Everything else OK

Mon, 15 Jan 2024 00:37:33 -0700

The pump cuts out after a few seconds. Happens with or without a capsule being present. The only way I can get the required volume is by holding down the button (right hand one). Heating / delivery volume and speed are normal.

⟐ Commented January 15, 2024 at 0:37 MST

Nespresso inissia: Does the Nespresso Inissia have a fuse?

Mon, 13 Dec 2021 03:19:26 -0700

A 110v Nespresso Inissia was connected to a defective 220v to 110v transformer, which was followed by a quick pop sound power and the Inissia will not power up after that occurred. Does the Inissia have a replaceable fuse that protects its electronics under such circumstances, and if so, how do I access and replace the fuse?

⟐ Answer deleted December 13, 2021 at 3:19 MST

Nespresso inissia: Water not pumping through.

Sat, 22 Jun 2024 08:04:21 -0700

My machine is new but was in storage for a year. It switches on and I can hear the pump but water does not pump through the machine.

⟐ Answer edited June 22, 2024 at 8:04 MST

Nespresso inissia: Anyone have an idea of what resistor is used for Inissia 120v

Fri, 13 Jun 2025 00:34:22 -0700

Anyone have an idea of what resistor is used for Inissia 120v (how many Ohms)? In my case the resistor blew, and now I can't determine ohms as one of the stripes is not visible.

here's a pic of the resistor, and here's a pic of the board and the burnt resistor

New pics to share, and also when I scan the QR code 8t gives me this: IMBLV2112301520.

I'm assuming that may be the model?

⟐ Answer edited June 13, 2025 at 0:34 MST

Nespresso inissia: Machine not piercing the capsule—water leaks out the back

Fri, 05 Dec 2025 08:05:17 -0700

Hello, After placing the coffee capsule and firmly closing the capsule compartment (capsule holder), I activate the machine. The water is pumped, but it escapes behind the capsule into the used capsule container (capsule bin). I open the compartment and see that the capsule has not been pierced—neither from the front nor the back. What could be the cause of this issue?

⟐ Answered December 05, 2025 at 8:05 MST

Nespresso inissia: My machine still makes coffee but water leaks out. How can I fix it?

Fri, 05 Dec 2025 08:01:17 -0700

My machine still makes coffee, but lots of water leaks through at the same time, I have to put a tray underneath to collect it. How can I fix that myself?

⟐ Answered December 05, 2025 at 8:01 MST

Nespresso inissia: Pump is not starting.

Mon, 20 Oct 2025 09:14:04 -0700

Breville Inissia. Lights flash and then steady. Press button and lights flash (like normal cycle, water heats) but the pump never starts (no noise) then buttons stop flashing, like brew has completed. Have tried priming, but think that it is something else, as there is no pump noise.

⟐ Answered October 20, 2025 at 9:14 MST

Nespresso inissia: Not pumping brew. Actually a magimix but looks similar.

Sun, 10 Aug 2025 02:54:03 -0700

All lights functioning and heater getting hot.

Pump not operating.

I've opened the unit and ay the side of the pump there is what I believe is a resistor soldered to the side of the pump but I'm not sure as it doesn't have the usual coded rings. Anyways it looks burnt. Would this be the reason I'm not getting any coffee flowing?

If it is can someone advise me exactly what it is and it's property values so I can get a replacement?

Thanks all.

⟐ Answered August 10, 2025 at 2:54 MST

Nespresso inissia: Why is my Nespresso Inissia leaking from te bottom?

Tue, 04 Mar 2025 09:19:15 -0700

My nespresso Inissia is leaking from te bottom, i disassembled te machine and found out that the leak comes from te motor? I don’t know how to fix it…

⟐ Commented March 04, 2025 at 9:19 MST

Nespresso inissia: Where can I find this part replacement

Mon, 20 Jan 2025 17:57:08 -0700

Where can I find this part:

it looks like some sensor

⟐ Answer accepted January 20, 2025 at 17:57 MST

Nespresso inissia: My Krups incissia lights are flickering very faintly and machine not w

Sat, 22 Jun 2024 07:01:43 -0700

My krups incissia is not working ..when I press either of buttons the lights just flicker very faintly ..and then stop ..I have tried to factory reset etc but nothing working ..no noise from the machine either

⟐ Answered June 22, 2024 at 7:01 MST

Nespresso inissia: No coffee flow from Nespresso Innissia

Sat, 22 Jun 2024 06:55:53 -0700

The Nespresso machine turns on and heats up, then on, no coffee flows.

⟐ Commented June 22, 2024 at 6:55 MST

Nespresso inissia: One capsule is locked and I cannot open the handle. What should I do?

Fri, 17 Sep 2021 11:58:15 -0700

The handle is locked, just after I put new capsule in.

When trying to operate the machine, I heard strange noise from inside, so I stopped teh machine immediately.

The handle is locked !

How can I release it ?

⟐ Answer accepted September 17, 2021 at 11:58 MST

Nespresso inissia: Where can I buy blown circuit board for inissia machine?

Fri, 05 Apr 2019 01:36:25 -0700

My new inissia machine got fried with power surge.. the electronic card blew... i need replacement

⟐ Answered April 05, 2019 at 1:36 MST

Nespresso inissia: need a part that I lost

Thu, 30 Nov 2017 09:06:58 -0700

I lost a part from the Inissia D40. The basket that catches the pods. How can I get a new one.

⟐ Answer accepted November 30, 2017 at 9:06 MST

Nespresso inissia: How can I disassemble (take apart) my Nespresso D40

Fri, 11 Aug 2017 05:21:00 -0700

I want to open my Nespresso Inissia D40 and I can´t find any tutorial of it, can you please help me.

⟐ Answer accepted August 11, 2017 at 5:21 MST

Nespresso inissia: Nespresso Inissia Leak from pushfit connector from pump

Tue, 13 May 2025 14:58:06 -0700

My krups nespresso inissia is leaking from the bottom. I heard the push fit connecing the pump to the tubing pop out. I found a tiny O ring when I disassembled the machine. I cannot see where this goes as there is already an O ring on the male pump connector. I pushed it back in (leaving the O ring out) and all was well for about 4 coffees and then the connector popped out again and water pumped out the bottom again. Could someone advise on this? Thanks. Please see photos

⟐ Edited by author May 13, 2025 at 14:58 MST

Nespresso inissia: Nespresso Inissia’s cup holder fell off; URGENT HELP NEEDED!

Mon, 14 Mar 2022 07:57:24 -0700

Hey! My nespresso inissia’s cup holder fell off while I was emptying my used pods into the trash can. I looked for any broken or missing parts, fortunately there were none. However, I still couldn’t manage to re-attach it and didn’t try too hard either out of the fear of breaking it. Can someone please help me out on how to re-attach it? Thank you 😊