iFixit - Answers With Device "Nespresso"

Nespresso Vertuoline: Light blinking two times, pause, two times, etc.

Tue, 31 Mar 2026 11:48:26 -0700

How can I resolve the two-blink error on this machine without returning it?

⟐ Commented March 31, 2026 at 11:48 MST

Nespresso inissia: After power up both lights keep blinking forever

Sat, 03 Aug 2024 02:48:02 -0700

They never stop, onless you do it manually pressing both buttons. Actually yoy can make a warery expresso, pressing stop when your cup is near filling.

⟐ Commented August 03, 2024 at 2:48 MST

Nespresso inissia: Will not stop blinking

Fri, 14 Apr 2023 06:22:06 -0700

The machine will not stop blinking. Pressing it for 3 seconds or more does nothing. All it does is blink.

⟐ Commented April 14, 2023 at 6:22 MST

Nespresso inissia: The pump cuts out after a few seconds. Everything else OK

Mon, 15 Jan 2024 00:37:33 -0700

The pump cuts out after a few seconds. Happens with or without a capsule being present. The only way I can get the required volume is by holding down the button (right hand one). Heating / delivery volume and speed are normal.

⟐ Commented January 15, 2024 at 0:37 MST

Nespresso CitiZ: Replacement parts for Citiz

Mon, 14 Jul 2025 03:44:27 -0700

Can someone post a link please for Nespresso Citiz replacement parts?

Thanks you!!!

⟐ Answered July 14, 2025 at 3:44 MST

Nespresso VertuoPlus Deluxe: Can someone provide a dissembling tutorial for this machine?

Sun, 27 Nov 2022 07:38:06 -0700

I would greatly appreciate if someone provided a tear down video for this machine. My gf’s machine is experiencing a coffee leak. The coffee leak may be cause because of some piping issue, may be clogged with ground coffee bits, not entirely sure. It is also causing an inconsistent coffee flow, this machine would normally pour of coffee in a smooth stream but now seems to be intermittent. Also, because of the clogged pipes and unnatural coffee flow it seems to have built up coffee in the canal area where you load in your pods, which causes the machine to leak coffee.

⟐ Answer accepted November 27, 2022 at 7:38 MST

Nespresso inissia: Does the Nespresso Inissia have a fuse?

Mon, 13 Dec 2021 03:19:26 -0700

A 110v Nespresso Inissia was connected to a defective 220v to 110v transformer, which was followed by a quick pop sound power and the Inissia will not power up after that occurred. Does the Inissia have a replaceable fuse that protects its electronics under such circumstances, and if so, how do I access and replace the fuse?

⟐ Answer deleted December 13, 2021 at 3:19 MST

Nespresso CitiZ: Nespresso CitiZ coffee machine, some water is leaking into collection

Sun, 25 Jan 2026 12:55:21 -0700

I have a Nespresso CitiZ coffee machine and some water is leaking into the collection tray without passing through the coffee pod. I assume that an internal seal has worn out. How easy is to renew the seal and from where can it be sourced?

⟐ Commented January 25, 2026 at 12:55 MST

Nespresso Aeroccino Plus: Flashing light shortly after start

Thu, 02 Oct 2025 10:18:36 -0700

I get a flashing light shortly after starting the warming process. Instructions advise to make sure the inside of the Aeroccino is clean. Mine is spotless!! Any ideas on the cause and solution?

⟐ Answered October 02, 2025 at 10:18 MST

Nespresso Vertuoline: How to disassemble Nesspresso Veru Next in order to clean it

Tue, 19 Dec 2023 16:03:06 -0700

The coffee coming out of the machine is a bit sour. I think that all it needs is a good deep clean.

Nesspresso wants to charge me 100$ to do it.

⟐ Answered December 19, 2023 at 16:03 MST

Nespresso Aeroccino Plus: My Aerocicino doesn't work anymore

Fri, 02 Feb 2024 12:14:28 -0700

My Aeroccino stoped working. The last time I've tried to use it, when I press the button it do not react, the light doesn't turn on. How can I figure out if the problem is with the base or with the aeroccino itself?

Any help is appreciated.

⟐ Answered February 02, 2024 at 12:14 MST

Nespresso Pixie Repair: Where does this piece go!

Fri, 05 Dec 2025 08:26:12 -0700

I followed video on how to take apart machine to clean diffuser plate, put back together and have a black plastic piece left over. Have seen others with same problem but no-one has an answer. It would make my day to know!

⟐ Commented December 05, 2025 at 8:26 MST

Nespresso: Lattissima Pro EN750MB - No water from Spout!?!

Mon, 29 Sep 2025 06:30:54 -0700

Had this machine for a number of years. Recently experienced the well-documented leaking from the Extraction Head. I replaced the Head ... produces espresso perfectly now/no leaking. However, now no water comes out of the water spout - so no hot water or frothing. All the hot water is diverted to the tray during this mode. I have tried all the "air pocket" removal techniques ... tried forced air back through the system and it comes out into the drain/tray area.

⟐ Commented September 29, 2025 at 6:30 MST

Nespresso Delonghi Lattissima Touch: Stuck on descaling mode

Tue, 04 Mar 2025 08:32:34 -0700

My machine is stuck on descaling mode and I can’t exit. Help me fix it please.

⟐ Commented March 04, 2025 at 8:32 MST

Nespresso inissia: Water not pumping through.

Sat, 22 Jun 2024 08:04:21 -0700

My machine is new but was in storage for a year. It switches on and I can hear the pump but water does not pump through the machine.

⟐ Answer edited June 22, 2024 at 8:04 MST

Nespresso Delonghi Lattissima Touch: How to replace brew unit

Tue, 04 Mar 2025 08:58:12 -0700

need to change over pod brewing unit

⟐ Answered March 04, 2025 at 8:58 MST

Krups Nespresso XN 2140: Why does it blink twice and pause etc. when I turn it on?

Tue, 23 Apr 2024 22:19:50 -0700

My machine is actually a delonghi nespresso essenza EN-95s. When i turn it on, the light blinks twice then pause then blinks twice again until it eventually blinks fast because of overheating. Once i open the brew head fully, it blows off steam. How do i fix this?

⟐ Answered April 23, 2024 at 22:19 MST

Nespresso CitiZ: Both brewing options pump the same amount of water

Sun, 07 Jan 2024 02:15:04 -0700

Hi. After cleaning/descaling the machine, both brewing size options pump the same (larger) amount of water. Is there a fix for this?

⟐ Commented January 07, 2024 at 2:15 MST

Nespresso inissia: Anyone have an idea of what resistor is used for Inissia 120v

Fri, 13 Jun 2025 00:34:22 -0700

Anyone have an idea of what resistor is used for Inissia 120v (how many Ohms)? In my case the resistor blew, and now I can't determine ohms as one of the stripes is not visible.

here's a pic of the resistor, and here's a pic of the board and the burnt resistor

New pics to share, and also when I scan the QR code 8t gives me this: IMBLV2112301520.

I'm assuming that may be the model?

⟐ Answer edited June 13, 2025 at 0:34 MST

Krups Nespresso XN 2107 XN210 XN212: Steam wand not working

Mon, 26 May 2025 12:09:15 -0700

The steam wand does not go through the full cycle of frothing the milk. It stops a couple of seconds into the process, with the image and words 'attach steamp tip' on the display. We have checked / unscrewed / screwed this on and off multiple times, including buying a new steam tip from the nespresso website.

How can this be fixed please?

⟐ Answered May 26, 2025 at 12:09 MST