iFixit - Answers With Device "Nailer"

Dewalt Nailers DWFP12233 2016: nail driver pops out when I connect air compresser

Tue, 11 Aug 2026 17:53:56 -0700

how to fix !!

⟐ Commented August 11, 2026 at 17:53 MST

Makita Nailer AN923 2016: Nail gun pin stuck out

Thu, 11 Jun 2026 09:38:01 -0700

I got a nail gun with the pin stuck out and doesn’t move

Dewalt Nailers DWFP12233 2016: Loose contact arm spring. How to replace and prevent reoccurrence?

Thu, 14 May 2026 03:03:57 -0700

On my DWFP12233 nailer the contact arm spring is dislodged and comes out from under contact arm cover. How do I replace it and prevent reoccurrence?

Hitachi Nailer NR83A2S1 2011: How to put the back together

Sun, 12 Apr 2026 18:22:45 -0700

My gun jammed so I unjammed it but I don’t know how to put it back together

Dewalt Nailers DCN660D1 2018: just flashing lights with full charge on battery and new motor

Tue, 31 Mar 2026 13:51:21 -0700

Full charge on the wall nailer just flashing lights

Framing Nailer: Matabo NR90AES1 not firing nails

Tue, 24 Feb 2026 10:24:56 -0700

I have bought a matabo NR90AES1 framing gun but it wont fire nails.

Bostitch Nailer SB1850BN 2011: I get a slight hiss when I squeeze the trigger? I have 80psi,

Wed, 24 Dec 2025 09:12:54 -0700

I get a slight hiss when I squeeze the trigger, like air is not getting to the cylinder? I have 80 psi

Makita Stapler AT1150A 2006: How to put my trigger together

Wed, 24 Dec 2025 01:42:37 -0700

My trigger broken on my stapler i cant figure out how to put it back together

Milwaukee Nailer 274120 ALL 2018: How to fix red light indicator

Sun, 21 Dec 2025 07:15:12 -0700

Red light indicator with my milwaukee

Makita Nailer AN923 2016: A nail is stuck and can’t get it out

Mon, 01 Dec 2025 19:28:42 -0700

A nail is stuck ans can’t get itbout

⟐ Commented December 01, 2025 at 19:28 MST

Dewalt Nailer DWFP71917 TYPE 1 2016: Tension on nail guides

Fri, 24 Oct 2025 17:33:35 -0700

There is no tension on nail advance mecho

Dewalt Stapler DWMIIIFN 2016: Part number of 3/4" Base plate

Mon, 23 Jun 2025 09:47:24 -0700

I want to order the 3/4" base plate for floor air stapler. Can I know the model id for that base plate

Staple Gun: Dissembled Rapid Btx530 Staple Gun. Unclear where two parts go

Sun, 25 May 2025 09:53:16 -0700

Hi all,

I recently opened up my Rapid BTX530 cordless staple gun after it stopped working properly. Turns out the issue was a jammed staple, which I’ve cleared.

However, in the process, I removed two internal parts (photos below). Which I couldn't figure out where they go. Strangely, the tool now works without them—but it's firing much stronger than before, to the point where the staples are being driven too deep, sometimes sinking well below the surface of the wood or material.

Has anyone experienced this before or know what function those parts might serve? Were they possibly regulating the depth or acting as a buffer? Where they should be put?

Any insight would be much appreciated—especially if it’s unsafe to use in this state.

Thanks in advance!

⟐ Commented May 25, 2025 at 9:53 MST

Ryobi Finish Nailer P325 2019: Plunger is not pushing nail out after oiling everything

Fri, 25 Apr 2025 08:12:43 -0700

I removed the nail magazine and lubricated down in the plunger and moving parts but the plunger is not firing correctly. It appears to only fire a short distance instead of to the end of the rail. The nail comes out but does not embed into the wood. What is the root cause of the failure?

Roberts Nailers 10600 2011: My stapler won’t shoot every time I pull the trigger, and isn’t feedin

Tue, 11 Feb 2025 10:30:02 -0700

My stapler isn’t firing when I pull the trigger.

Makita Stapler AT1150A 2006: Why is my stapler only working intermittently?

Thu, 30 Jan 2025 12:04:14 -0700

Staples only come out 1 every 3rd try.

⟐ Commented January 30, 2025 at 12:04 MST

Dewalt Nailers DCN21PL 2018: Why my DeWalt cordless framing gun jams?

Tue, 19 Nov 2024 14:26:38 -0700

Every time I shoot a nail I have to release the pressure from the nails cartridge to the tip

⟐ Commented November 19, 2024 at 14:26 MST

Ridgid R250SFF: Discharge of single nail

Thu, 31 Oct 2024 06:19:31 -0700

Our R250SFE unit will fire 1 nail but not a second because the driver does not retract to allow for discharge of the second one.When the air supply is removed the driver will retract and will fire a single nail again.The driver only retracts when the air is removed.

Also there is air leaking around the hose connection.

The unit recently was upgraded with the overhau kit.

Dewalt Nailers DWFP12233 2016: Air sips through the rear exhaust but nailer does not push nail

Thu, 26 Sep 2024 12:31:55 -0700

Air sips through the rear exhaust but nailer does not push nail

Ryobi Pin Nailer P318 2017: My Ryobi pin nailer will not fire. Even when the safety lever is activ

Tue, 27 Feb 2024 19:07:36 -0700

After 6 mo of Ryobi pin nailer use with no issues all of a sudden it will not fire and drive the pin. Safety lever is activated, nothing is jammed, just will not activate the firing trigger