⟐ Answered November 29, 2020 at 12:09 MST

White spot-> those pixel are always white, on a white screen, those are noticeable because are even whiter.

Here's some photos:

open

Thanks you for your support,

Andrea

⟐ Commented September 06, 2023 at 1:22 MST

I plug it into a charger and it comes up showing the charging screen. But doesn't turn on. Any idea why?

It is almost like the power switch isn't working even though I didn't touch the switches.

⟐ Answered September 08, 2019 at 8:12 MST

I cracked my Moto X Pure Edition’s screen and now I am wondering how to fix it. The touch is mostly unresponsive and the digitizer is badly cracked. The actual picture looks good exept there is an orangy discoloration where the cracks are. Should I purchase a digitizer or do I also need the lcd? The LCD is expensive so i’d like to get just the digitizer.

Here is what the damage looks like:

Thanks guys,

Will

⟐ Commented October 27, 2018 at 18:10 MST

⟐ Answered July 27, 2020 at 22:26 MST

⟐ Answered September 02, 2018 at 20:10 MST

⟐ Edited May 27, 2016 at 10:08 MST

⟐ Answer edited October 27, 2020 at 10:25 MST

⟐ Answered December 28, 2018 at 8:33 MST

⟐ Commented May 22, 2018 at 19:11 MST

Alright, so a few months ago i dropped my moto x and the screen shattered. I got all the parts, fixed it, and the screen is functioning like normal. The main problem is that the battery will drain extremely quickly, and the phone will not charge. The phone recognizes the cord as plugged in, but the battery menu says not charging. I have tried two phone chargers, both do not work. I have cleared cache, soft reset, and still nothing. The front flash is also missing, which i was thinking might cause the battery to discharge quickly. I have already replaced the battery, and it still has the same problem. I am beginning to think that it might be a charger port problem, or maybe even a problem with the logic board. (maybe even flash? who knows?)

Also if anyone has a good suggestion in how to glue the screen to the frame of the phone that would be great thanks. (1mm 2 sided tape is not doing the job)

⟐ Answered December 21, 2017 at 12:39 MST

Half displays fine and half is ghost lines etc. The screen will go all the way through boot and the digitizer appears to work but I can't get any further because the I'm locked out and I can't access have off the pattern I need to draw to unlock the phone.

Now here's where it gets weird. When I installed the broken screen back in which was displaying just fine previously it now also is bisected and "blocking"

This leads me to the conclusion that I may have a loose connection? I went back and checked all of them and they all appear to be seated with no bent pins.

Anybody else experienced this - anybody have any solutions?

⟐ Answered November 25, 2017 at 6:28 MST

⟐ Answered November 18, 2017 at 20:53 MST

⟐ Commented August 01, 2017 at 18:42 MST

⟐ Edited August 24, 2016 at 11:01 MST

⟐ Edited August 24, 2016 at 11:05 MST

⟐ Commented November 20, 2017 at 14:40 MST

Thank you.

⟐ Commented September 26, 2017 at 5:23 MST

I can still charge my phone with an old charger from another phone but no turbocharging for me.

⟐ Commented August 11, 2016 at 1:23 MST

please reply..

thanks in advance..

⟐ Edited May 27, 2016 at 10:09 MST