iFixit - Answers With Device "Miele Dishwasher"

Miele Dishwasher: Miele Dishwasher unused for a year - “open stopcock”

Sat, 19 Oct 2024 23:34:21 -0700

I have just reinstalled a Miele Dishwasher (G6820 SC) which had been lying unused for a year.

Water seems to be flowing and draining out but it gives me the “open stopcock” message at the start of a cycle, and says “waterproof” after about an hour or so of trying.

It was working fine a year ago when it was unplugged. has been kept indoors in a dry secure room since then.

Any ideas?

⟐ Commented October 19, 2024 at 23:34 MST

Miele Dishwasher: Miele Dishwasher Error F85 on display

Mon, 11 Mar 2024 15:09:39 -0700

My Miele Dishwasher G2220 SCI just popped up this error on the display. Suspect it's a temp error but haven't yet located any details on it.

⟐ Edited March 11, 2024 at 15:09 MST

Miele Dishwasher: Miele G2183SCVi Dishwasher stops mid-cycle, beeps, all light flashing

Mon, 03 Apr 2023 17:56:58 -0700

My dishwasher runs for somewhere between 2 minutes and 17 minutes before it stops and beeps constantly. Opening up the door, all 6 lights are flashing and the pump in the bottom continues to run for several minutes. I have validated that water is being circulated in the machine and the pump is working (pumped into a bucket).

I can't seem to find how to determine error codes on this machine as there is no display. Any insights would be greatly appreciated.

Thanks.

⟐ Commented April 03, 2023 at 17:56 MST

Miele Dishwasher: Miele Dishwasher - dispensers and fan stopped working

Sun, 09 Nov 2025 18:20:44 -0700

I have a Miele G868 dishwasher, which is maybe 25 years old at this point, but has worked pretty well (with a few minor repairs), running on average once a day completely full. We do clean out the action parts regularly, and they still are in pretty good condition.

The fan stopped running during the drying cycle, then (or maybe simultaneously) the soap dispenser stopped opening + the jet dry stopped dispensing. I replaced the dispenser component (an easy fix I've done before with a $30 part), but that didn't fix the issues.

So my question is, what might be next to try? I'm fine with doing a bit more troubleshooting, but I'm not a good electronics guy. So if it is likely something expensive like the electronics control board that finally pooped out then maybe I should quit now and invest in a new one at this point (which I'm fine with)?

Miele Dishwasher: Model G6620 Type HG05 SN64 /103512145

Mon, 04 Mar 2024 06:19:32 -0700

Error code 51.

Runs for 30 seconds from the start, and then displays error code 51.

YouTube research suggests water pressure relays; may also include a pressure switch.

The best so far: https://youtu.be/L0Mjr678ics?si=tMH0ZLp0...

Miele Dishwasher: Flashing lights when program starts

Wed, 21 Sep 2016 00:56:12 -0700

When starting, all program lights are flashing. According to the manual this is a technical distortion...

Any hints?

⟐ Commented September 21, 2016 at 0:56 MST