iFixit - Answers With Device "Medical Furniture"

Walker: Repair broken handle part to lock walker or squeeze the brake grip

Sat, 13 Jun 2026 10:52:14 -0700

Broke handler part to squeeze brakes or lock walker

⟐ Commented June 13, 2026 at 10:52 MST

Quantum Rehab 4Front2: Shorted joystick with charger

Fri, 08 May 2026 12:51:34 -0700

Bought a charger from Amazon plugged it in and it shorted the joystick. Reset breaker now it says configuring network. What do I need to do now?

Quantum 4 front 2

Permobil M300 HD Power Wheelchair: My M1 Brake Error light is flashing

Fri, 01 May 2026 01:55:42 -0700

⟐ Answered May 01, 2026 at 1:55 MST

Medical Power Strip: 6power strip won't work or steady s

Tue, 17 Mar 2026 01:41:49 -0700

Why won't 3 of 6 outlets of my power strip work

⟐ Commented March 17, 2026 at 1:41 MST

Stryker FL28C: Brakes do not lock

Thu, 12 Mar 2026 18:35:56 -0700

How do you fix the brakes on this unit. The wheels just click but do not lock.

⟐ Commented March 12, 2026 at 18:35 MST

Pride Mobility Jazzy 600 Power Wheelchair: The power indecator doesn't decrease over time of operation.

Wed, 04 Mar 2026 11:09:23 -0700

It reads full power then after a while of operation it reads empty, but still works usually I turn unit off wait a minute turn on again. Reads ok till it isn't. Again I reset. When it does this I don't idle when not moving I turn off. I wish I had a better more mechanical register maybe connecting through charger port.

Any one have a clue of what im talking about?

Hill-Rom Hospital Bed: Head/Feet Controls Not Working

Tue, 10 Feb 2026 19:55:09 -0700

I need help. I am a disabled, double amputee who bought a Hill Rom Total Care Sport bed in my home since I am bedridden and comfort is a priority. I have had the bed for several years, but yesterday out of the blue, the head and foot buttons will not work to raise the head section. I am stuck lying flat on my back in a rather uncomfortable position. My family tried unplugging the bed to reset it, but it did not work. There are no warning lights or error messages. The button makes a noise likes it's trying to lift when pushed but nothing happens. My family checked the brakes to make sure they were unlocked and nothing seems to be in the way or out of place. I called multiple companies today who said they cannot help me as the bed is in a private home rather than a hospital or doctor's office. Anyone with any suggestions to help troubleshoot this?

Equipment: Hill Rom TotalCare Sport Bed

⟐ Commented February 10, 2026 at 19:55 MST

Stryker Power Pro Ambulance Stretcher: Stretcher won’t stay elevated long

Thu, 15 Jan 2026 13:55:49 -0700

I have an older Power pro xt that lets up and down perfectly, but once you raise the stretcher up it slowly leaks back down in a few minutes. Is there a check valve that could be stuck ? The unit isn’t leaking any fluid.

⟐ Answered January 15, 2026 at 13:55 MST

Hill-Rom TotalCare Bed: The bed won’t respond to go up down. Signal said service required

Wed, 31 Dec 2025 20:21:51 -0700

Hillrom bed dies nit respond up down Service required light up

⟐ Commented December 31, 2025 at 20:21 MST

Hill-Rom VersaCare Bed: Why won't some of my P3200 beds not go as low as others?

Sun, 21 Dec 2025 09:33:28 -0700

I have a number of Versacare P3200 beds but some won't go all the way down while others will?

⟐ Commented December 21, 2025 at 9:33 MST

Hill-Rom TotalCare Bed: The knee up and down Botton doesn't work.

Sun, 21 Dec 2025 09:20:02 -0700

When you put it in a chair position, the legs part of the bed doesn’t bend all the way down.

⟐ Commented December 21, 2025 at 9:20 MST

Hill-Rom VersaCare: There is a orange light flashing

Sun, 21 Dec 2025 09:18:26 -0700

There is a orange light flashing

⟐ Answered December 21, 2025 at 9:18 MST

Whill Ci powerchair: There is message I received it does not fix

Wed, 03 Dec 2025 20:26:22 -0700

my wheelchair turned itself off after going very short distance with an error message 65.

⟐ Answered December 03, 2025 at 20:26 MST

Linet Bed: Why is my moves so slow

Sat, 29 Nov 2025 12:44:36 -0700

When i click to move head up took much time

Stryker Critical Care Bed: Head won’t go up or down, sounds like it’s trying.

Thu, 06 Nov 2025 12:27:49 -0700

Head of the bed won’t go up or down.

⟐ Answered November 06, 2025 at 12:27 MST

Wheelchair: Cant reach a nut that is in a tight place, special tool needed?

Thu, 23 Oct 2025 19:24:04 -0700

Hello,
I am trying to repair a wheelchair and to take the motor out.
it is a quickie 646SE

For a particular metal plate to be removed there are 4 bolts to remove. I removed one already with a box and a key so I know the tools have correct mesurement when there is space to manoeuver.

But one of the 4 nuts is placed in a corner and the key is kind of too fat to get get far enough around it to hold it while i turn the box. if fact it does not hold it at all.

What to do? Would i need another kind of key?

ps There is not place for the box on this side samething for the ring at the other end of the key.

Thanks

⟐ Commented October 23, 2025 at 19:24 MST

Wheelchair: My electric wheelchair was working fine and now it doesn't seem to be

Tue, 07 Oct 2025 04:14:47 -0700

My electric wheelchair was working fine and now it isn't charging

Arjo Maxi Sky 440: Where in ft Myers Florida can I get the Arno maxi sky 440 repaired

Tue, 30 Sep 2025 11:27:48 -0700

Where in ft Myers Florida can I get the Argo maxi sky 440 repaired?

Joerns Healthcare Dolphin Fluid Immersion Simulation System: Are their repair technicians for these systems?

Sun, 31 Aug 2025 10:12:10 -0700

Dolphin bed systemrepair

⟐ Commented August 31, 2025 at 10:12 MST

Steris Amsco Warming Cabinet: Service on my QDJ06

Thu, 28 Aug 2025 10:11:27 -0700

About how much would it set me back to get my QDJ06 serviced?

⟐ Answer edited August 28, 2025 at 10:11 MST