iFixit - Answers With Device "Magic Mouse 2"

Magic Mouse 2: Why does my mouse stay on when the switch is off?

Fri, 13 Oct 2023 15:01:45 -0700

My Magic Mouse 2 will sometimes stay off even when I've switched it off. It will still move the cursor on my Mac and is obviously still connected to Bluetooth. It doesn't look like ifixit offers a replacement switch. I suppose I'll open it up and clean it, but any advice would be helpful.

Magic Mouse 2: Can I replace its switch(omron D2FC-7-H) to another one?

Thu, 05 May 2022 01:21:17 -0700

Hi.

I have permanent pain in my finger due to a past accident.

I want to use magic mouse 2, but its click pressure is too high for me.

So I want to replace its default switch(omron china D2FC-7-H) with another model.

Would this be possible?

Thank you so much,

GIL B. Chan

Magic Mouse 2: Dan look at my guide please

Fri, 26 Nov 2021 12:42:17 -0700

Wat do you think of this? Magic Mouse 2 Battery Replacement

⟐ Commented November 26, 2021 at 12:42 MST

Magic Mouse 2: Swipe gesture left/right doesn't work or only works intermittently

Mon, 08 Nov 2021 17:21:25 -0700

For example, in Safari, when I try and do left/right swipe to back and forward on webpages, it only works like 1/5 times or sometimes doesn’t even (it looks like it’s sensing some movement and the previous window will like jump around at the edge of the window, trying to swipe back or forward but not being able to go all the way).

Any way to fix this?

Magic Mouse 2: How can I open the Magic Mouse 2 without tearing it apart/ungluing it

Mon, 09 Aug 2021 05:15:54 -0700

I had this question since I was following the MM2 teardown in iFixit and it basically seemed as if you had to destroy the mouse in order to go in and clean it.

To answer my own question (and I just did this and it worked), you can just stick a spudger in the sides and twist to open 4 clips around the edges and then the top pops off just like that.

I went in and cleaned everything with isopropyl alcohol and it seemed to fix my issue of not sensing gestures/phantom gestures.

Video that I followed: https://www.youtube.com/watch?v=2SdBNRCZ...

⟐ Answer edited August 09, 2021 at 5:15 MST

Magic Mouse 2: My Magic mouse only tracks on glossy surfaces. Please help.

Fri, 23 Apr 2021 23:43:18 -0700

My Magic mouse only tracks on glossy surfaces such as magazines. It has stopped working on any other surface, even mouse pads! Please help!

This device is A1657 and only works on glossy magazines and photographs.

It stopped working on everything else. Simply will not track on mousepads, glass surfaces, linen like bedsheets or even table tops.

This is strangely freaking me out!

i have found another thread on different community based forum and leads to no where.

https://discussions.apple.com/thread/538...

⟐ Commented April 23, 2021 at 23:43 MST

Magic Mouse 2: Can I fix left click being stuck?

Tue, 02 Mar 2021 15:03:05 -0700

Hey there :) My magic mouse two acts as though the left click is being held down. I’ve taken it apart and the actual trigger component still clicks properly. I disconnected the ribbon connecting the top half of the mouse and turned the mouse on - the problem momentarily disappeared, but other strange things happened (probably because the top part of the mouse was missing!).

Any ideas what the issue might be?

Magic Mouse 2: Is there any way to silence the click on an Apple magic mouse?

Wed, 09 Dec 2020 17:23:11 -0700

I’m wondering if Ican silence the clicking sound by modifying the internals or if the click is one of those common soldered-in buttons which actually makes a click sound itself (sorry don’t know what they’re called).

Magic Mouse 2: Magic 2 does not work since it fell from the table to the floor

Tue, 24 Nov 2020 11:56:39 -0700

The mouse fell from the table to the floor and has not worked again. The pilot on the bottom does not light up even when I put it to charge. It is totally off. I have taken it apart and apparently everything is clean and perfectly positioned. What can I do to try to get it back?

Magic Mouse 2: Left and right click need hard pressure to work

Sun, 07 Jun 2020 20:53:11 -0700

I have magic mouse 2 space grey edition, both click buttons need a hard pressure to make it work even I need to lift the mouse. But sometimes after turning off and on again it works normally and then going back hard to click again. What can I do to fix my MM2? Thank you

Magic Mouse 2: Magic mouse 2 dropped

Fri, 20 Sep 2019 00:12:18 -0700

Hello, I dropped the magic mouse 2 from the table, now the cursor is still at the top left and it doesn't move. in system preferences the mouse is not detected, if I connect the lightning cable, it tells me 100% charge and mouse connected wi-fi. but the mouse doesn't work anyway. do you think it's broken or can I somehow restore it?

I'm Italian sorry for using english translator