iFixit - Answers With Device "Magic Bullet NutriBullet"

Magic Bullet NutriBullet: Why has my NutriBullet stopped working?

Fri, 12 Apr 2024 08:35:51 -0700

My nutribullet was working fine, but then one day the motor sounded like it was working on half speed/low intensity and failed to chop/blend anything. I have given the unit a clean, but to no avail.

⟐ Commented April 12, 2024 at 8:35 MST

Magic Bullet NutriBullet: Cup stuck to base of NutriBullet

Mon, 09 Feb 2026 01:49:30 -0700

The cup of the magic NutriBullet is stuck to the base , can’t remove it

⟐ Commented February 09, 2026 at 1:49 MST

Magic Bullet NutriBullet: Why does the NutriBullet leak?

Sun, 29 Mar 2026 13:14:30 -0700

There is spillage coming from my NutriBullet.

⟐ Commented March 29, 2026 at 13:14 MST

Magic Bullet NutriBullet: Changing the plastic that attaches to the blade

Thu, 01 Dec 2022 17:08:36 -0700

When you take out the cup that contains the blades you'll see a plastic circle with a nut in the center to hold it to the motor. That plastic broke & I have bought a replacement but can't get the old nut off the motor. Suggestions?!?!

⟐ Commented December 01, 2022 at 17:08 MST

Magic Bullet NutriBullet: Why don't the blades spin and/or make a noise?

Tue, 22 Dec 2020 12:45:01 -0700

The blades on the NutriBullet refuse to spin and there is no sound coming from the power base.

⟐ Answer edited December 22, 2020 at 12:45 MST

Magic Bullet NutriBullet: I need to replace the swich which.

Fri, 12 Aug 2022 09:13:09 -0700

One of the activators has been forced while it was stuck. This resulted in the perforation of the top of the small plastic cylinder which holds a spring. As a result the lach is loose and does not play its role of actionating the switch. I need to buy the broken parts. Where can I find it ?

⟐ Answered August 12, 2022 at 9:13 MST

Magic Bullet NutriBullet: How do I fix a broken spindle?

Sun, 01 Mar 2020 21:50:49 -0700

I turned on my NutriBullet RX with a spoon in it and it appears to have snapped the internal spindle that drives the blade. Can this be replaced?

Thanks

⟐ Answered March 01, 2020 at 21:50 MST

Magic Bullet NutriBullet: How do I replace the center plastic circle part that the blade attache

Tue, 17 Jan 2023 06:13:59 -0700

The center plastic circle that the blade and cup attaches to in order to begin spinning, broke off and I ordered a new part. That part needs to be threaded onto the centre motor piece, how is that done? That center nut and screw must undo correct?

⟐ Commented January 17, 2023 at 6:13 MST

Magic Bullet NutriBullet: smoke on the NutriBullet?

Sun, 18 Oct 2020 08:45:58 -0700

Why is there a smoke on the NutriBullet when I begin using?

⟐ Commented October 18, 2020 at 8:45 MST

Magic Bullet NutriBullet: rubber burning smell from unit and now doesnt work

Tue, 22 Dec 2020 09:28:59 -0700

unit doesnt work something seems to have burnt out

⟐ Answer edited December 22, 2020 at 9:28 MST

Magic Bullet NutriBullet: Why aren't the top and bottom wheels locking together?

Fri, 20 Feb 2026 17:40:23 -0700

Both top and bottom male/female wheels supposedly to lock for spinning, aren’t actually locking correctly hence smoke is produced, I would assume due to the friction of an imperfect lock. How to resolve? I’ve tried disassembling from the base but it just seems a hassle of a job considering that I’m not even sure I can find replacement wheels. It seems one of the wheels was consumed by the friction initiated with power on. Help!

⟐ Answered February 20, 2026 at 17:40 MST

Magic Bullet NutriBullet: power base giving off a burnt plastic smell

Mon, 25 Oct 2021 00:55:11 -0700

After blending with the nutri bullet there is a burnt plastic smell coming from the power base.

⟐ Commented October 25, 2021 at 0:55 MST

Magic Bullet NutriBullet: only one cup works

Fri, 07 Oct 2016 12:50:57 -0700

Only one cup works with the nutribullet. Why would one cup work and not the others.

⟐ Answered October 07, 2016 at 12:50 MST

Magic Bullet NutriBullet: My nutribullet cup won’t fit into the base

Thu, 19 Feb 2026 19:30:44 -0700

My nutribullet cup will not fix into the base anymore

⟐ Answered February 19, 2026 at 19:30 MST

Magic Bullet NutriBullet: The power base is spinning but the extractor cup doesn't spin.

Thu, 22 Jun 2023 08:33:56 -0700

My NutriBullet was working fine but suddenly the extractor cup stopped spinning, though the power base base is still spinning. I removed the extractor cup and I noticed that the rubber underneath the extractor was trimmed. Where is the service center? They told me when I bought this machine it’s a lifetime warranty, can you provide me the tel.# and the location of the service center near here in Las Pinas City, Philippines.

⟐ Commented June 22, 2023 at 8:33 MST

Magic Bullet NutriBullet: My Nutribullet RX makes a functioning noise but doesn't spin

Sat, 15 Jan 2022 11:21:45 -0700

I wanna say its the drive socket that is broken since the motor sounds like its working, however even if it is it, how would I replace the part to make it work?

⟐ Commented January 15, 2022 at 11:21 MST

Magic Bullet NutriBullet: My NutriBullet is stuck

Tue, 22 Dec 2020 10:18:50 -0700

My bullet is stuck in the machine.

⟐ Edited December 22, 2020 at 10:18 MST

Magic Bullet NutriBullet: My NutriBullet stopped working

Mon, 22 Apr 2024 01:08:39 -0700

My Magic Bullet stopped Working from one day to the next, literally. It won't hum or attempts to start, as the question above. It just won't do anything. I didn't do anything other than blending some veggies with water. Nothing different than what I have done since I bought it 8 months ago. I checked the outlet and the cord to see if there were some kind of breakage or interruption, nothing there. Everything seems to be in order, there are no visible loose or broken parts. Cannot return it since it’s been more than 6 months and I don't know what to do.

⟐ Answered April 22, 2024 at 1:08 MST

Magic Bullet NutriBullet: 120v Nutribullet not working, ran on 220v

Thu, 07 Apr 2022 11:18:28 -0700

Bought a Nutribullet from US and accidentally ran it with 220v supply. Later bought a step down transformer and tried, it's not powering on, what could have gone wrong? Disassembled the unit and the motor windings etc look fine, is there a fuse or a reset?

Is there a wiring circuit diagram for Nutribullet? The motor windings are rated 120v, so it would not run on 230v, this would require re-winding of the motor to match the voltage.

Are the power boards sold separately?

⟐ Answer deleted April 07, 2022 at 11:18 MST

Magic Bullet NutriBullet: Black dust during use

Sun, 28 Feb 2021 10:18:02 -0700

Hi there. When using my nutribullet black dust comes out from what appears to be under the base. There is quite a lot and it coats the entire bench and everything in the vacinity of the unit. Can I fix this. My NutriBulletRecipes is no longer in warranty

⟐ Commented February 28, 2021 at 10:18 MST