iFixit - Answers With Device "Magic Bullet NutriBullet"

Magic Bullet NutriBullet: Why does the NutriBullet leak?

Sun, 29 Mar 2026 13:14:30 -0700

There is spillage coming from my NutriBullet.

⟐ Commented March 29, 2026 at 13:14 MST

Magic Bullet NutriBullet: Why is my motor smoking?

Mon, 02 Mar 2026 11:50:25 -0700

Motor smoking and smells like burned plastic?

Magic Bullet NutriBullet: Why aren't the top and bottom wheels locking together?

Fri, 20 Feb 2026 17:40:23 -0700

Both top and bottom male/female wheels supposedly to lock for spinning, aren’t actually locking correctly hence smoke is produced, I would assume due to the friction of an imperfect lock. How to resolve? I’ve tried disassembling from the base but it just seems a hassle of a job considering that I’m not even sure I can find replacement wheels. It seems one of the wheels was consumed by the friction initiated with power on. Help!

⟐ Answered February 20, 2026 at 17:40 MST

Magic Bullet NutriBullet: My nutribullet cup won’t fit into the base

Thu, 19 Feb 2026 19:30:44 -0700

My nutribullet cup will not fix into the base anymore

⟐ Answered February 19, 2026 at 19:30 MST

Magic Bullet NutriBullet: Cup stuck to base of NutriBullet

Mon, 09 Feb 2026 01:49:30 -0700

The cup of the magic NutriBullet is stuck to the base , can’t remove it

⟐ Commented February 09, 2026 at 1:49 MST

Magic Bullet NutriBullet: Nutribullet Rx Stuck on Pulse mode

Fri, 19 Sep 2025 05:22:45 -0700

My Nutribullet Rx NB 301 suddenly stopped continuously blending and started to pulse, starting and stopping, starting and stopping until now it barely works at all.

I had been doing a nut butter but I think nuts were too hot. Still, there was no sign overheating and no smell to motor.

Activator buttons seem fine and not stuck. I let it set for a day and still no change in symptoms. What could be the issue?

The gear in the base that accepts the pitcher is quite wobbly. Could that be the issue?

⟐ Edited September 19, 2025 at 5:22 MST

Magic Bullet NutriBullet: My NutriBullet stopped working

Mon, 22 Apr 2024 01:08:39 -0700

My Magic Bullet stopped Working from one day to the next, literally. It won't hum or attempts to start, as the question above. It just won't do anything. I didn't do anything other than blending some veggies with water. Nothing different than what I have done since I bought it 8 months ago. I checked the outlet and the cord to see if there were some kind of breakage or interruption, nothing there. Everything seems to be in order, there are no visible loose or broken parts. Cannot return it since it’s been more than 6 months and I don't know what to do.

⟐ Answered April 22, 2024 at 1:08 MST

Magic Bullet NutriBullet: Why has my NutriBullet stopped working?

Fri, 12 Apr 2024 08:35:51 -0700

My nutribullet was working fine, but then one day the motor sounded like it was working on half speed/low intensity and failed to chop/blend anything. I have given the unit a clean, but to no avail.

⟐ Commented April 12, 2024 at 8:35 MST

Magic Bullet NutriBullet: How to prevent cup getting stuck on motor base.

Mon, 18 Dec 2023 08:49:15 -0700

My cup consistently gets stuck on the motor base. I can get it off but it's not easy and takes more time then it should. I hear a brand new one also can get stuck. I would like to know how to completely prevent this.

Magic Bullet NutriBullet: My NutriBullet doesn't stay on

Sun, 17 Dec 2023 18:23:16 -0700

I just got my nutribullet rx, and it does not stay on. When I hit the power button, the blue ring turns on, but right when I release the light turns off. The blender works when I hold the power button down, but it doesn't stay on.

⟐ Commented December 17, 2023 at 18:23 MST

Magic Bullet NutriBullet: The power base is spinning but the extractor cup doesn't spin.

Thu, 22 Jun 2023 08:33:56 -0700

My NutriBullet was working fine but suddenly the extractor cup stopped spinning, though the power base base is still spinning. I removed the extractor cup and I noticed that the rubber underneath the extractor was trimmed. Where is the service center? They told me when I bought this machine it’s a lifetime warranty, can you provide me the tel.# and the location of the service center near here in Las Pinas City, Philippines.

⟐ Commented June 22, 2023 at 8:33 MST

Magic Bullet NutriBullet: Magic bullet stuck in on position.

Thu, 09 Mar 2023 14:30:04 -0700

When I plug magic blender in it immediately goes on without cup attached. White lock/unlock tabs work freely.

Magic Bullet NutriBullet: How do I replace the center plastic circle part that the blade attache

Tue, 17 Jan 2023 06:13:59 -0700

The center plastic circle that the blade and cup attaches to in order to begin spinning, broke off and I ordered a new part. That part needs to be threaded onto the centre motor piece, how is that done? That center nut and screw must undo correct?

⟐ Commented January 17, 2023 at 6:13 MST

Magic Bullet NutriBullet: Stacking blade removal from nutri bullet

Fri, 13 Jan 2023 14:44:51 -0700

How do you take the stacking blade out of the nutri bullet express.instructions do not say.its ok I found out myself you have to turn the black knob underneath the jug it will click

⟐ Answer accepted January 13, 2023 at 14:44 MST

Magic Bullet NutriBullet: Changing the plastic that attaches to the blade

Thu, 01 Dec 2022 17:08:36 -0700

When you take out the cup that contains the blades you'll see a plastic circle with a nut in the center to hold it to the motor. That plastic broke & I have bought a replacement but can't get the old nut off the motor. Suggestions?!?!

⟐ Commented December 01, 2022 at 17:08 MST

Magic Bullet NutriBullet: I need to replace the swich which.

Fri, 12 Aug 2022 09:13:09 -0700

One of the activators has been forced while it was stuck. This resulted in the perforation of the top of the small plastic cylinder which holds a spring. As a result the lach is loose and does not play its role of actionating the switch. I need to buy the broken parts. Where can I find it ?

⟐ Answered August 12, 2022 at 9:13 MST

Magic Bullet NutriBullet: Smoke came out of the NutriBullet

Tue, 21 Jun 2022 15:38:04 -0700

It started spinning even if the container is not yet fully and properly placed. The spinning power and sound was less thought. Then, smoke started coming out of the machine.

⟐ Commented June 21, 2022 at 15:38 MST

Magic Bullet NutriBullet: Plastic bit that controls blade is broke - replacement?

Sun, 10 Apr 2022 17:03:12 -0700

Hi! This plastic part that controls the blade moving has broke. All the plastic bits have broken off. I believe I just need to replace this part as everything else is still functional. Do you know where I could get a replacement just for this plastic bit? Thanks!

⟐ Commented April 10, 2022 at 17:03 MST

Magic Bullet NutriBullet: accidentally plugged my nutribullet from the USA into higher voltage

Fri, 08 Apr 2022 06:09:07 -0700

I also accidentally plugged my newly bought nutribullet from the USA into a higher voltage socket in Ghana and instantly, power passed through making it not function. Can anyone help please? I’m in Ghana and so if anyone has recommendations for a repairer who can get it fixed, I’ll appreciate it greatly.

⟐ Answer edited April 08, 2022 at 6:09 MST

Magic Bullet NutriBullet: 120v Nutribullet not working, ran on 220v

Thu, 07 Apr 2022 11:18:28 -0700

Bought a Nutribullet from US and accidentally ran it with 220v supply. Later bought a step down transformer and tried, it's not powering on, what could have gone wrong? Disassembled the unit and the motor windings etc look fine, is there a fuse or a reset?

Is there a wiring circuit diagram for Nutribullet? The motor windings are rated 120v, so it would not run on 230v, this would require re-winding of the motor to match the voltage.

Are the power boards sold separately?

⟐ Answer deleted April 07, 2022 at 11:18 MST