iFixit - Answers With Device "Magic Bullet MB1001B"

Magic Bullet MB1001B: Plastic and rubber gears are super weak

Sun, 19 Feb 2023 05:19:28 -0700

We have purchased 2 Magic Bullets over the last 12 years or so, we still have the original Magic Bullet tucked away in our cabinet, but not one of them are working now because all the plastic and rubber gears are totally stripped away, I have spent a small fortune on replacement gears, but non of them last long I am now at the point of trying to find someone to make me a set of metal gears, if I had access to a machine shop I would try to do it myself what do you think about this idea?

Magic Bullet MB1001B: cutter bearings have ceased

Wed, 14 Sep 2022 11:53:16 -0700

cutter bearing has ceased

⟐ Answer edited September 14, 2022 at 11:53 MST

Magic Bullet MB1001B: Why is my Magic Bullet just humming, but the blades aren't turning?

Wed, 02 Oct 2019 12:51:25 -0700

When I lock my cup into the base, my blender just hums and the blades don't spin. I can hear the motor working but the blades don't turn.

⟐ Commented October 02, 2019 at 12:51 MST

Magic Bullet MB1001B: Magic bullit ran on 220V instead of 110v

Wed, 03 Jan 2018 07:49:36 -0700

I recently bought a Magic bullit in the USA, but didn't noticed it was only bult for 110V not for 110/220V

So I accidently ran the bullit on 220V, it ran for 2 seconds then it died.

Is there a way to Convert the magic bullit from 110v to 220v without replacing the whole motor?

Thanks,

Best Regards,

Thijs

⟐ Commented January 03, 2018 at 7:49 MST

Magic Bullet MB1001B: Why my Magic Bullet will not start?

Mon, 28 Aug 2017 20:04:26 -0700

The switch seems to engage ( I hear the click when I twist the cup on), but the Magic Bullet won't start.

Magic Bullet MB1001B: Can't remove cup from base unit

Sun, 07 May 2017 08:21:56 -0700

I placed the cup on the base, pressed down and turned clockwise. I may have turned it too hard because I can't remove it. Is there a way to take it off?

⟐ Answer accepted May 07, 2017 at 8:21 MST

Magic Bullet MB1001B: replace drive plastic nut

Fri, 05 Feb 2016 16:11:14 -0700

how do I replace the brass nut below the plastic drive?

Magic Bullet MB1001B: Why won't my Magic Bullet crush ice?

Thu, 29 Oct 2015 09:33:13 -0700

The blades of my Magic Bullet are turning but are not actually crushing any of the ice inside, what do I do?

⟐ Answer accepted October 29, 2015 at 9:33 MST

Magic Bullet MB1001B: Can I get more cups without buying an entirely new Magic Bullet?

Thu, 29 Oct 2015 09:32:53 -0700

I broke all of my cups, but I don't want to buy a whole new device. Is there anyway I can just get the cups?

⟐ Answer accepted October 29, 2015 at 9:32 MST