iFixit - Answers With Device "Magic Bullet Blender"

Nutribullet 1000 (NB-202): Noisy motor bearing on operation

Sun, 22 Mar 2026 17:03:00 -0700

Has anyone repaired a failing/noisy motor bearing on a Nutribullet 1000, NB-202, and can provide a link to the correct sized replacement bearing?

The unit is still blending well, but I can't help but notice that the motor bearing is becoming louder and louder - and am hoping to repair it before failure.

Magic Bullet NutriBullet: Why is my motor smoking?

Mon, 02 Mar 2026 11:50:25 -0700

Motor smoking and smells like burned plastic?

Nutribullet 1200W: Why all my light is blinking green at the same time.

Mon, 24 Feb 2025 20:34:21 -0700

I recently got Nutri Bullet 1200watt and as soon as I got it i tried to blend smoothie but After 10 seconds the blender stops and all the light on my button started blinking at the same time. I also notice the motor was getting warm. I tried to do it after 15 minutes but same problem. Please help me with this problem. Thank You

⟐ Edited by author February 24, 2025 at 20:34 MST

Magic Bullet NutriBullet: How to prevent cup getting stuck on motor base.

Mon, 18 Dec 2023 08:49:15 -0700

My cup consistently gets stuck on the motor base. I can get it off but it's not easy and takes more time then it should. I hear a brand new one also can get stuck. I would like to know how to completely prevent this.

Nutribullet 1200W: Why is my blender not spinning

Wed, 11 Oct 2023 22:02:40 -0700

The blender turns on but the blades don't spin or do anything.

Magic Bullet: Operation switch get stack

Tue, 05 Sep 2023 08:15:28 -0700

Where i can get operation switch for Magic Bullet?

⟐ Edited by author September 05, 2023 at 8:15 MST

Magic Bullet NutriBullet: Magic bullet stuck in on position.

Thu, 09 Mar 2023 14:30:04 -0700

When I plug magic blender in it immediately goes on without cup attached. White lock/unlock tabs work freely.

Magic Bullet MB1001B: Plastic and rubber gears are super weak

Sun, 19 Feb 2023 05:19:28 -0700

We have purchased 2 Magic Bullets over the last 12 years or so, we still have the original Magic Bullet tucked away in our cabinet, but not one of them are working now because all the plastic and rubber gears are totally stripped away, I have spent a small fortune on replacement gears, but non of them last long I am now at the point of trying to find someone to make me a set of metal gears, if I had access to a machine shop I would try to do it myself what do you think about this idea?

Magic Bullet NutriBullet: Smoke came out of the NutriBullet

Tue, 21 Jun 2022 15:38:04 -0700

It started spinning even if the container is not yet fully and properly placed. The spinning power and sound was less thought. Then, smoke started coming out of the machine.

⟐ Commented June 21, 2022 at 15:38 MST

Magic Bullet NutriBullet: Plastic bit that controls blade is broke - replacement?

Sun, 10 Apr 2022 17:03:12 -0700

Hi! This plastic part that controls the blade moving has broke. All the plastic bits have broken off. I believe I just need to replace this part as everything else is still functional. Do you know where I could get a replacement just for this plastic bit? Thanks!

⟐ Commented April 10, 2022 at 17:03 MST

Magic Bullet NutriBullet: blue light flick on and off, and blender does not rotate.

Sat, 26 Mar 2022 18:58:19 -0700

Blue light on blender flickers on and off when switched on, the blender does not work.

⟐ Commented March 26, 2022 at 18:58 MST

Magic Bullet NutriBullet: 900 W model, The lid with blade no longer screws onto large cups.

Mon, 23 Aug 2021 17:56:02 -0700

Only 2 weeks old, I used it a couple of times with no problem and cups and blade were put in dishwasher. Then today I can no longer screw the blade lid onto the large cups. It appears that the cups are now too big. The small cup that I hadnt used much works fine. I wonder if it is dishwasher damaged?.

Magic Bullet NutriBullet: Oil dripping into food

Sun, 02 Feb 2020 14:21:52 -0700

I noticed that my nutribullet had started to leak oil from the outer part of blade part for a while, now the oil has started to leak through into the food i’m blending. What do I need to do to solve this?

⟐ Edited by author February 02, 2020 at 14:21 MST

Magic Bullet NutriBullet: Replace a Fan in Base

Fri, 25 Oct 2019 18:41:35 -0700

I need to replace the fan in the NutriBullet

⟐ Commented October 25, 2019 at 18:41 MST

Magic Bullet Blender: Why can't I get my cup to loosen or turn?

Tue, 08 Oct 2019 07:59:43 -0700

My magic bullet just stopped, and I cannot get the cup out. It will not turn or loosen.

Magic Bullet NutriBullet: I can't take off the cup after blending

Wed, 16 Jan 2019 07:41:48 -0700

The cup of my juicer is stuck to the base and I can’t remove the cup with its liquid content. I have tried to put some force on it and it’s impossible to twist in order to get it out.

Magic Bullet NutriBullet Pro: How to remove Nutribullet Pro top base gear?

Thu, 26 Jul 2018 09:08:44 -0700

I followed some youtube guides explaining how to remove the plastic gear of the NutriBullet 900W (Pro), however, it has been imposible to loose it. Any clues?

Magic Bullet NutriBullet: Replacement circuit board for Nutribullet 1000?

Mon, 16 Jul 2018 12:40:32 -0700

Is is possible to buy a replacement circuit board for the Nutribullet 1000?

My Nutribullet leaked during use with liquid entering the base and causing arcing. This has damaged one of the surface mount chips and possibly other components.

I’ve stripped the base and cleaned but still not working.

Magic Bullet NutriBullet: Round plastic part broken

Tue, 15 May 2018 21:40:37 -0700

Round plastic piece broke apart but motor is working . Round white with screw under jar is broken how to fix it please

Magic Bullet NutriBullet Pro: Blade Doesn’t depress

Sat, 07 Apr 2018 09:06:21 -0700

I can’t press the blade section down into the base and hence unit doesn’t work, any suggestions?