iFixit - Answers With Device "MFC-J4410DW"

MFC-J4410DW: How to reset the ink flush

Thu, 03 Feb 2022 07:00:49 -0700

How to reset ink flush

⟐ Answered February 03, 2022 at 7:00 MST

MFC-J4410DW: Needs ink drip tray replacing

Mon, 27 Mar 2023 14:10:11 -0700

Ink tray full replace

⟐ Answered March 27, 2023 at 14:10 MST

MFC-J4410DW: Wann Resttinte in Absorberbox und wann in Spüöbox

Thu, 05 Sep 2024 12:44:47 -0700

Hallo zusammen.

Wann leitet der Drucker Tinte in die Absorberbox und wann die Spülbox? Ich glaube, Brother ist der einzige Hersteller, der zwei Boxen für abgeleitete Resttinte hat.
When does the printer drain ink to the absorberbox and when to the flushing box? I Think Brother is the only manufacturer that has two boxes for waste ink.

MFC-J4410DW: Fehlercode: " Gehäusedeckel schließen " Brother MFC J4410DW

Tue, 02 Jan 2024 04:31:38 -0700

After I have carefully removed the ink absorber from the above-mentioned device and reinserted it - following these excellent instructions - I always get the error message " Close cover" after screwing it on and off several times! What can I do? Where is the sensor for this error message located? If possible the page and part number on the PDF exploded pages. Many, many thanks in advance! MfG

Nachdem ich den Tintenabsorber aus dem o.g. Gerät vorsichtig entfernt und wieder eingesetzt habe - nach dieser hervorragenden Anleitung - erhalte ich nach mehrmaligem Auf- und Abschrauben immer die Fehlermeldung "Deckel schließen"! Was kann ich tun? Wo befindet sich der Sensor für diese Fehlermeldung? Wenn es möglich ist, die Seite und Teilenummer auf den PDF-Explosionsseiten. Vielen, vielen Dank im Voraus! MfG

Übersetzt mit www.DeepL.com/Translator (kostenlose Version)

MFC-J4410DW: When documents prints, it comes out with lines and ink is faded

Tue, 25 Aug 2020 15:05:00 -0700

My printer doesn’t pronto well, when the document or whatever prints, it comes out with lines and the ink is very faded and sometimes the page is blank. Changed the cartridges to new ones and still the same issue

MFC-J4410DW: My MFC-J5720DW Printer won't connect to computer via wifi

Mon, 09 Mar 2020 09:36:32 -0700

I recently upgraded my very old wifi router to a new cable modem/wifi router combo unit that supports both 2.4 GHz and 5 GHz channels. I’ve set both the computer and printer to run on the 2.4 GHz channels, as I’ve read that Brother machines can’t use 5 GHz channels. I uninstalled the previous Brother drivers and hardware installed on my computer, and then via the brother website downloaded the full driver/hardware suite for my machine. I’m able to run the setup for wifi until it asks to setup the wifi network on the printer itself, which I do, and then nothing happens and I can’t complete the setup process for wifi and ControlCenter software. I’ve only been able to get everything to work (print and scan from/to computer) by using the USB cable, which is a pain in my desk setup. Any advice or help on getting the wifi connection to setup properly and work would be greatly appreciated. Thanks!

⟐ Commented March 09, 2020 at 9:36 MST