iFixit - Answers With Device "LG WM3050CW"

LG WM3050CW: LG wm2016cw Front Load giving OE error code

Mon, 02 Sep 2024 13:20:25 -0700

I have an LG wm2016cw Front Load Washing machine that is giving me an 0E error code. I have cleared the filter of any debris. When I unplug the drain hose no water comes out of it. But when I open the filter housing lots of water comes out. I think I can hear the pump turning and when I reach my finger in and turn the propeller it does offer resistance. So I am thinking it is not the pump. Is no water coming out of the drain hose a clue as to why it may not be draining?

⟐ Commented September 02, 2024 at 13:20 MST

LG WM3050CW: Washer will not fill on a wash cycle but will on rinse/spin

Sat, 22 Mar 2025 14:32:46 -0700

Washer will not fill on a wash cycle. You can hear it trigger for water but nothing. When I ran a rinse/spin only water flowed in like normal. Original issue was IE code. Ordered and replaced and cleaned the inlet valves.

⟐ Answered March 22, 2025 at 14:32 MST

LG WM3050CW: Washer not powering up

Wed, 01 Nov 2023 04:59:13 -0700

I have a Kenmore washer (model 79641272211) that's actually been made by LG and seems identical to the LG WM3050CW. My problem is when I went to pull my clothes out, they were still dripping wet as if the machine never went into a spin cycle. I went to turn the washer back on and I got nothing, no display, nothing. I've got power at the outlet and power coming into the machine so cord is good, I pulled the top cover and no loose connections and I've also tried a hard restart procedure and still nothing. I pulled the cover off the main board and noticed a fuse but it shows continuity, I also spotted a fuse at what I think is called the filter (where the power cord comes into) and its fuse tested OK as well. Do I have a bad board and if so which one? The main board or the display board? Any help would be appreciated.

I should note that when doing a continuity test on the noise filter, I have continuity on the outer terminals but not the middle terminals. I'm getting conflicting thoughts on this because some say the middle terminals should have continuity, others say it's not used so no continuity at the middle terminals is normal. Who's right? I should also note that I'm getting 120 going into the filter and 120 going out.

⟐ Commented November 01, 2023 at 4:59 MST

LG WM3050CW: Inlet to dispenser connection

Sat, 14 Oct 2023 08:06:25 -0700

My wife decided to replace the dispenser on her own bc she didn’t want to wait for me to get back from my work trip. She didn’t label them from which connection the came from. Do you have an image of which ones go to where?

LG WM3050CW: this machine keeps vibrating when it starts spining

Sun, 23 Apr 2023 13:39:01 -0700

after washing when its time to spin the machine vibrates very hard, sometimes it pulls out of its socket