⟐ Commented December 01, 2024 at 2:44 MST

I have a serious problem with my LG V10. my phone get turn on but show only Black light on display. First i thought Its the LCD problem, i brought new LCD and replace it but still i got the same problem with new LCD.

Can somebody tell me what the real problem is. If the problem with my motherboard then what is it.

⟐ Answered February 24, 2024 at 21:04 MST

98% of the time it sits at the LG good life screen. If I haven’t tried to mess with it in a week, it will boot up and but once I get into the photo app or any other app, the phone locks up on that screen and I have to pull the battery out to get it to turn off.

⟐ Answer accepted January 11, 2023 at 21:20 MST

⟐ Answered March 14, 2022 at 14:15 MST

⟐ Answered January 12, 2022 at 6:24 MST

⟐ Answered December 21, 2019 at 10:05 MST

i have lg v10 versio korean local use

any way i have it and i want protect the phone from BOOTLOOP problem what i have to do before that happen

and other question is there any way theh enable fm radio on it because it is have no fm and after i see on the net they say the fm radio disabled from hardwer

⟐ Answer accepted September 19, 2019 at 7:24 MST

⟐ Commented April 30, 2019 at 12:41 MST

⟐ Answered January 24, 2019 at 12:34 MST

:'(

⟐ Answered December 19, 2018 at 18:58 MST

Its profile is that of the 3 button assembly—volume up “button” on top, power button below that, and the volume down “button” below that.

Watch this from 0:50 to 2:00 to see part removed and glued back in place. (Scroll down a bit to see video start button.)

UPDATE: 9/26/18

Zhu at Witrigs.com calls it a “gasket”. Looks like one. But a longer name (a la the “volume and power button flex”) would be helpful since I’d like a new one.

Zhu at Witrigs.com is sending me a used one from a phone that’s been taken apart. We’ll see how much it helps. As it turns out, I have “all 3 pieces” of the gasket. Two had been glued separately to the volume buttons, the other had been glued over 100% of its surface to the fingerprint sensor. (This is a refurbished phone that Verizon sent as warranty replacement after previous 3 didn’t work at all well.)

⟐ Edited by author September 26, 2018 at 15:26 MST

I'd appreciate any help other than sending it back to the person I purchased it from.

⟐ Answered August 22, 2018 at 22:26 MST

⟐ Commented August 08, 2018 at 10:10 MST

Thanks in advance!

⟐ Commented June 15, 2018 at 4:24 MST

⟐ Commented May 21, 2018 at 0:59 MST

⟐ Reopened May 01, 2018 at 15:45 MST

I have an Lg V10 that i have not dropped and has no water dammage. Yesterday after showing no problems my phone powered itself off, going through the logos to do so (no sudden power loss). It was not plugged in at the time and i believe the battery still had power. it vibrated weakly as it shut down.

I have tested multiple batterys in it at various levels of charge and was able to only get a reaction every so often (3 times so far) the 1st got to the boot screen and crashed, 2nd got there and stayed there and i had o remove the battery, 3rd time let me get into the factory reset menu than crashed.

When connected to my computer it detects the phone and find my android confirms that it hasn't been powered on so i doubt it has screen issues.

I can charge a battery in it still so it is not the power in circuits (I think)

however even a full battery doesn't seem to change anything, is it possible that this is the power discharge circuit?

If you have any ideas on this i would love to hear them.

EDIT:

I managed to get it to the hard reset screen and confirm, i start to erase and it crashed after about a minute

⟐ Edited by author April 20, 2018 at 9:18 MST