Hoping to be clear

1) I have 2 G2, one is working (A) and the other one isn't working (B)

On B the red led is blinking if I plug th phone to the supply charger

2) I swap 2 flexes board

Result: now both G2s are working

Basically A with the flex originally in B (that wasn0t working) now is working

And B is working with the flex originally in A (that already was warking)

3) I partially disonnect the flex ffrom the A (remind, it is working with B flex that at the beginning wasn't working), I place correctly various sensors, I connect again the flex: now it isn't working

If I switch 2 flexes, I have the same behaviour of point 1

It is quite clearly the 2 G2s are working but it seems the flex that originally was in B has some issue... what I'm not able to explain myself is the reason why at the beninnig, the first time I switched 2 flexes, both were working but after partially disconnect and then connect again it wasn't working again.

Someone had some similar experience/suggestions?

Thanks

When i bought it and strt using wifi this message has appeered for long time but i have ignored."hands free activation"

Then suddenly while i was tring to open wifi it was flashing"like it's turning on and off on and off" and can't use the wifi at all

Could u help ..

⟐ Edited by author June 26, 2017 at 12:53 MST

I have a LG D802 EU unlocked and noticed that it wont charge anymore, so I ordered a replacement flex cable. Sadly, I ordered one for the D801, which I didnt notice at first.

So I replaced the flex cable, it charges again but the problem is that the touchscreen does not work properly anymore (sometimes there are 'ghost touches', so it physically still works).

After a lot of googling, it seems that the problem is that the connector on the right side of the flex is responsible for the screen and is the part that seems to make problems. [Red on the picture]

Another problem is that the one connector on the left side does not fit, as the 'hole' is bigger on the D801 model. [Yellow on the picture]

Is there anything I can do? Maybe using parts from the original flex cable I have, like only the upper things?

I have tried unplugging/replugging the red connector already.

Picture: i.imgur_com/mk3IlDQ.png

⟐ Commented May 21, 2017 at 11:27 MST

So I've just had my LG G2 (D802) screen replaced and now I'm having issues with my speakers.

With regards to the loudspeaker, I've explained the problem here and I don't know the solution: https://www.youtube.com/watch?v=8ceQgppA...

With regards to the ear speaker, it is so quiet that I can get by when indoors but I have no hope of hearing my caller in a loud environment.

What can I do to solve these issues?

⟐ Commented May 16, 2017 at 12:17 MST

There is no issue with touch or whatever, this seems to be a display problem...any idea?

Please see image here:

⟐ Edited by author May 05, 2017 at 3:23 MST

Recently my G2 got in a bit of water.

While it still works perfectly, strangely enough, the functions of the buttons switched or something.

For example, when clicking the volume up button the volume does not only go up but down as well, so you can't really control the volume. The same with the volume down button.

The power on/off button keeps it function but also lowers the volume.

So what exactly happened beneath the hood?

I also want to eventually open the back, so I'd appreciate if you told me what to look for and how to fix it.

Thanks in advance :)

⟐ Edited by author December 11, 2016 at 12:32 MST

⟐ Edited by author December 02, 2016 at 3:23 MST

From time to time the Audio just disappeared. This happend to me only in Cyprus.

Thank you very much for helping.

⟐ Edited by author October 31, 2016 at 1:45 MST

After choosing to erase all data, the screen goes black for a bit then reboots and gets stuck in bootloop again. I need my phone but not sure what to do to make it useable?

⟐ Commented October 15, 2016 at 22:22 MST

please i have problem with my device that whene i install pixel launcher he didn't work

that's what's showing in my screen

device show this message " Malheureusement pixel launcher a cessé de fonctionner"

⟐ Edited by author October 12, 2016 at 11:19 MST

After separating the broken touch screen from the lcd , i have cleaned the lcd and test it if works and it did. Then i have attached the new touch screen using loca (not too much , but it covered the lcd) . In the end i used UV to dry the glue and all it seems ok. I tested the phone and it was ok the touch working and the lcd had a clear display.

In the morning it appears some marks on the screen as shades at the corner of the lcd. I separated again the lcd from the touch because i thought cleaning the lcd will fix the problem but after testing the lcd was damaged permanently .

one doubt i have is that i have let enough the UV light dry the glue and had damaged the lcd. ( i have let under UV light about 1 minute).

Please help me because i am very new to this kind of thing but i need help.

[Update]

the charger is the AUKEY Quick Charge 2.0 Wall Charger 18W www.amazon.co.uk/dp/B017UDW03E/ref=cm_sw_r_taa_-KCMxbZYZC1H5

Also I got the phone yesterday charged it fully got up this morning and the battery was completely drained. Do I need a new battery ?

⟐ Edited by author July 28, 2016 at 2:02 MST

⟐ Commented June 08, 2016 at 12:36 MST

Everything went fine, except the glass started to come out at the bottom because there's too much pressure behind it, also there are multiple pressure points in the display. I tried to mess around with the screws, but no success.

I'm afraid of damaging the display and or touch matrix if I let this the way it is. It's definitely going to get worse, not only that, but the freaking glass is coming out.

I don't know what to do. Could this be that the screen pack I bought was mounted incorrectly and it's not actually my fault?

Help?

⟐ Commented April 08, 2016 at 1:33 MST