iFixit - Answers With Device "Krups Coffee Maker"

Krups 963: steam leaking from the lid

Sun, 10 Sep 2023 15:03:18 -0700

steam is escaping from the lid

⟐ Answered September 10, 2023 at 15:03 MST

Krups 963: To remove corrosion or rust.

Sun, 20 Aug 2017 08:02:56 -0700

Hello, I am using KURUPA 963 / A. This boiler is made of aluminum, the inside of the boiler has been corroded like a photo, how do you keep the body from harming people and how to remove the corroded parts? thank you.

⟐ Answered August 20, 2017 at 8:02 MST

Krups 963: How do I fix my coffee pot? put water in, it won't come out in pot?

Wed, 22 Sep 2021 17:39:47 -0700

Device not present in your list - I have Type 867 Krups Cafe coffee and espresso maker. 22yrs old! the espresso works fine. When i put water in the pot, it just wont work when i turn it on, water stays in reservoir, bottom where pot sits never heats up either. I really want to keep and not replace!! Please help!

⟐ Answered September 22, 2021 at 17:39 MST

Krups 963: Do I need thisKrups 963 865 871 985 Espresso Coffee Maker STEAM BUILD

Sun, 14 Dec 2025 10:35:12 -0700

Do I need this to run the coffee pot.

Krups 963 865 871 985 Espresso Coffee Maker STEAM BUILD UP DISC PLUG OEM

⟐ Answered December 14, 2025 at 10:35 MST

Krups Coffee Maker: Power plug error icon on my Krups EA826E10!

Sun, 12 Oct 2025 14:01:51 -0700

Hello everyone,

I have a strange issue with my Krups coffee machine. It shows the power plug error icon every time I turn it on.

After checking online, I found that this problem is often caused by the NTC sensor. When I inspected mine, I saw that it had completely come loose from the solder, so I resoldered it, reassembled everything, and reset the device.

Now, when I turn it on, it starts for a couple of seconds, tries to run the self-cleaning and heating cycle, and I can hear a high-pitched motor sound — but not the usual lower one. Then it goes back to showing the plug icon again.

Has anyone experienced this before or knows what could be causing it? Any help would be appreciated!

⟐ Commented October 12, 2025 at 14:01 MST

Krups 963: Where can I buy a new gasket?

Sat, 15 Jun 2019 07:20:32 -0700

Where can I buy a new gasket?

⟐ Answer accepted June 15, 2019 at 7:20 MST

Krups 963: on/off switch is recessed inside

Sat, 04 Aug 2018 11:39:12 -0700

The on/off switch is recessed inside the coffee maker. I disassembled the bottom to access the switch and cannot get the RED part of the switch to go through the opening because there are two small flat piece on the top and bottom of the opening preventing the switch from going through the opening. What now?

Krups 963: Leaking from either the cap or gasket under cover

Fri, 30 Jun 2017 17:16:49 -0700

I have removed the cover and checked the gasket/head seal - it's not cracked.

However, it recently started spewing out steam to the point where the black cover appears to have almost melted. After reading some of the answers here, I'm wondering if there's plenty of calcification within the boiler. Would you know where I could buy the head seal - I haven't been able to source it. Any advice would be appreciated. Thanks!

Krups 963: water is escaping above the ground coffee holder

Sat, 07 Jan 2017 05:41:13 -0700

When I operate my Krups Espresso Machine, water is escaping from the area above the metal cup that holds ground coffee instead of being pushed through the coffee grounds. Is this something i can repair at home?