iFixit - Answers With Device "Kenmore Dryer"

Kenmore Elite HE3 Dryer: Water spraying in dryer Drummond

Wed, 08 Apr 2026 16:53:56 -0700

My dryer Drummond has water spraying out into it and won’t stop.

Kenmore Elite dryer: No power at control panel

Tue, 03 Feb 2026 20:00:45 -0700

I have a Kenmore Elite Smartheat Quietpak 9 that has no power. The door light comes on, but nothing else works, I hear the relay click on the main board when the door opens and closes as well. So far I’ve tested the thermal fuse, the resistor, the main coil, the door switch, both thermostats, and the belt tension switch. Everything has tested out good. I checked for power at the outlet, I checked the power cord itself for resistance across each wire, everything is good. As a result of my findings, I replaced the main control panel and the control panel for the display in conjunction with each other, figuring that was all that would be left.

Note: prior to this issue I had bad rollers and I replaced those, the belt, and tensioner. I tested the dryer and it worked fine, the next day, I had this concern.

After replacing both control panels, I have the same symptoms. Door light comes on, no power at panel, no beeps, nothing. I am at a loss, I don’t know what else to replace or test, I don’t usually get to this point but this thing is kicking my butt. Haven’t done laundry at home in two weeks now, need a fix asap please.

⟐ Commented February 03, 2026 at 20:00 MST

Kenmore Series 110 Dryer: Capacity of Kenmore dryer and washer

Fri, 02 Jan 2026 08:28:17 -0700

what is the capacity of my Kenmore dryer model 11068132414 and Kenmore washer model 11028132412

Kenmore Elite HE3 Dryer: Check lint filter light is blinking and dryer won't run.

Thu, 20 Nov 2025 13:10:09 -0700

No matter which setting I choose , the check lint filter light starts flashing and the dryer won't start. I have reset the breaker, unplugged the dryer, cleaned out the filter and the vent in the back. An answer on another of this question said to check the heat sensor which I will do. Is there anything else to check for?

⟐ Answered November 20, 2025 at 13:10 MST

Kenmore Series 80 Dryer: Replaced motor. Now have loud noise

Wed, 19 Nov 2025 22:14:46 -0700

I'm lost and new to trying to fix my own appliances. I'm sure this is a novice question but we all start somewhere, right? For backstory... The motor definitely ceased as my dryer stopped mid cycle. Wouldn't start back up. Buzzing sound when I pushed start button. If I pushed too long, I tripped the breaker. Motor and fan were stuck. Ended up buying a new fan. Thermafuse is new as well. That occured because my husband insisted it was the thermafuse when i was certain it was the motor. $5 replacement. Ran for 1 dry cycle and ceased again mid cycle with a loud noise before stopping for the last time. 😂 I established I was correct from the beginning and motor needed replaced.

Fastforward....

I bought a used motor with a 30 day guarantee off Ebay. I got it set and followed the instructions. Pushed start got a loud noise. It sounded the same as the dryer did when the motor went out. I tried setting and resetting the motor several times now.I did get it quieter but I'm lost. I am so sure it's set correctly. Yet still a loud noise. Did I buy a bad motor? Belt, pulley and rollers look good according to all the repair videos I have seen. Uploaded a clip of the noise incase it is helpful.

⟐ Commented November 19, 2025 at 22:14 MST

Kenmore Dryer: Why my dryer never stops

Mon, 17 Nov 2025 17:31:24 -0700

every time I do a cycle I set it up for certain time but it just won’t stop

⟐ Edited November 17, 2025 at 17:31 MST

Kenmore Series 80 Dryer: My dryer won’t start

Fri, 14 Nov 2025 09:42:03 -0700

My Kenmore elite dryer was working great but now won’t start. I had an appliance repair person come out and tell me that is was the timer. I ordered the new timer and put it in. Still not starting, so I replaced the fuse and the door switch. I’m out of ideas. There is a hum when you press the start button so the power is getting to the timer.

thoughts?

⟐ Commented November 14, 2025 at 9:42 MST

Kenmore Elite HE3 Dryer: Dryer turns off and comes back on when it's good and ready

Tue, 21 Oct 2025 06:41:31 -0700

We're in a rental where they cut A LOT of corners. This is the w/d setup. The dryer shuts off usually after just a few minutes. The lights go off and you have to wait for them to come back on, lately up to 48 hours. This just won't do. Wet clothes shouldn't sit in dryer for two days, I wouldn't think.

⟐ Commented October 21, 2025 at 6:41 MST

Kenmore Elite HE3 Dryer: Cooling light staying on

Sun, 28 Sep 2025 23:21:01 -0700

Why cooling light on and dryer won't dry clothes?

⟐ Commented September 28, 2025 at 23:21 MST

Kenmore Gas Dryer 90 Series: Dryer door not closing

Thu, 25 Sep 2025 00:16:47 -0700

Door not staying closed

⟐ Commented September 25, 2025 at 0:16 MST

Kenmore Series 80 Dryer: Dryer push button won’t start or click

Thu, 12 Feb 2026 12:03:28 -0700

I shut the door, did my settings as normal, pressed the start button and nothing happened. No noise when pressing the button.

Model 110.64842400

Series

MS1105258

TYPE: DWSR - ELE - 2406028 - CV54

⟐ Answer edited February 12, 2026 at 12:03 MST

Kenmore Dryer: Help! 2003 Kenmore dryer 110.64832400 not working!

Tue, 09 Sep 2025 08:11:11 -0700

Replaced dryer heating element, dryer-thermostat, dryer high-limit thermostat, dryerthermal fuse & Dryer Thermal Cut-off cleaned lint everywhere. Dryer turns on rotates and begins to heat, within 5 min shuts off completely and trips breaker. What is wrong now?

⟐ Edited September 09, 2025 at 8:11 MST

Kenmore Heavy Duty Dryer: Kenmore Heavy Duty Dryer shuts off mid cycle

Mon, 08 Sep 2025 17:37:02 -0700

I have a Kenmore dryer that decided to stop during mid cycle. I checked the thermal fuse as this is a typical problem. Upon finding the thermal fuse it had been bypassed already, so I ruled that out. I also checked the door switch, start switch and all are working. It will work once it cools down, but then when it heats up, it's stops during mid cycle. So, Then I thought it might be the motor, which was covered in lent, so I removed the tube, and vacuumed everything to include the lent tube. Put all back together and to my surprise is turned on, then again cut off during mid cycle. Any clue as to what it might be now.

⟐ Commented September 08, 2025 at 17:37 MST

Kenmore Series 110 Dryer: Dryer stops running in the middle of cycle.

Fri, 23 Jan 2026 08:26:12 -0700

I have a Kenmore MOD 110.6192311, DWJR-ELE_2406026-FM24. The dryer has started shutting off in the middle of a dry cycle. I go in and hit start and it starts right back up. It will run for anywhere between 2 minutes and the end of the cycle before it stops again. I removed and tested the door switch, it might be faulty, so I jumped the wires and bypassed the switch, and still having the same issues. It also is not heating up like it should, but that more random then the shutting off.

⟐ Answer edited January 23, 2026 at 8:26 MST

Kenmore Elite HE3 Dryer: Dryer panel isn't coming on

Sun, 13 Jul 2025 18:30:29 -0700

Light comes on on the inside but the panel to start the dryer isn't lighting up or working

⟐ Commented July 13, 2025 at 18:30 MST

Kenmore Dryer: Thermal fuse on dryer without front pry-off front panel

Thu, 12 Feb 2026 12:05:01 -0700

I have a model 110.74622300. It doesn't have a removable panel on the front like in all the YouTube videos I find. It looks like the attached picture. Where do I find the thermal fuse on this layout? ⏎
⏎
I did find this parts diagram. Do I need to remove the back panel for this layout? The thermal fuse is Item 39⏎
⏎

⏎

⟐ Answer edited February 12, 2026 at 12:05 MST

Kenmore Dryer: I replaced the heating element which shorted out and snapped. heating

Sun, 01 Jun 2025 18:25:15 -0700

Replaced heating element. turned on and snapped but element still heats but drum doesn't turn.

⟐ Commented June 01, 2025 at 18:25 MST

Kenmore Elite dryer: When I turn the dryer on it asks me to check filter don’t know wher

Mon, 26 May 2025 23:08:55 -0700

I don’t know where is the filter

⟐ Commented May 26, 2025 at 23:08 MST

Kenmore Elite dryer: Dryer keeps telling me to check vent but it's squeaky clean!

Mon, 12 May 2025 16:52:52 -0700

So I have a Kenmore Elite dryer that keeps ending the cycle after 5-10 minutes, giving me a blinking light on "check vent." I have completely taken apart the exhaust, thoroughly cleaned it, and put it back together. I have also snaked the lint trap and exhaust line forwards and backwards with a spinning brush and shop vac. The vent is clean as can be, so something else is wrong.

Do you know how I can resolve this or at least what to do next for troubleshooting? I was suspecting I might need to replace the motherboard but I would hate to do that just to find out I still have a smaller, cheaper part that is causing the problem.

⟐ Answer edited May 12, 2025 at 16:52 MST

Kenmore Series 110 Dryer: lever swtch..can't het it click into place so push button won't start

Fri, 09 May 2025 00:47:49 -0700

I have a Kenmore electric dryer model 87584100 and need the fabric, care lever switch has a lever swtch..can't het it click into place so push button won't start dryer

⟐ Edited May 09, 2025 at 0:47 MST