⟐ Commented April 16, 2026 at 4:53 MST

⟐ Edited April 02, 2026 at 3:02 MST

⟐ Answer accepted March 26, 2026 at 12:09 MST

⟐ Commented March 25, 2026 at 18:26 MST

⟐ Commented February 03, 2026 at 23:08 MST

Can someone tell me what voltage I can inject with a variable PSU to test the backlights please?

Set powers on but black screen. No backlight no picture.

I have the back cover off it and there are no lights showing thru the small holes that light usually shines thru, as in back light.

I have seen them light up before and work but they might have been damaged when I was playing around with the TV.

No audio.

I don't have aerial connected.

I suspect the power board and that's why I would like to know what voltage I can inject to see if the back light is there.

Thanks for your input.

⟐ Answer accepted January 29, 2026 at 22:13 MST

⟐ Commented January 14, 2026 at 1:23 MST

Translation Spanish - English

The screen only shows lines. Why is this happening and how can I fix it? Thank you.

⟐ Answer accepted December 07, 2025 at 14:37 MST

⟐ Commented December 01, 2025 at 19:11 MST

⟐ Commented November 15, 2025 at 23:44 MST

Second  row says::  SERIAL NO: TR1DAM024100535

Third row is a bar code

The sticker on the tan board has three rows

First row says:  0500-0405-1340

Second row is: a  bar code

Third row says: 20I333C9P149502

On the tan board sticker in the third row, I believe the third character from the left is a capital eye  (  I  ).

The problem is the  TV all of a sudden decided not to turn on.

 First there was no red power light illuminated at the front bottom center of the TV. Then after unplugging it for 30 min, when power cord plugged back into the tv, the power red light illuminated but the tv still would not turn on, neither manually nor with the remote.

Removed back of the TV, checked continuity at the white horizontal fuse on the tan board, and meter said it was good.

I have no idea what is wrong with it and can only assume it is some sort of power supply problem.  Although that red power light illuminated after removing the cord from the tv for 30 minutes.  So apparently something is getting power.

Could you tell me some other items to check in order to try to isolate the problem.

⟐ Commented September 19, 2025 at 22:33 MST

⟐ Commented June 02, 2025 at 18:14 MST

T con board? Main board? Ribbons? I can replace them but not sure which one it is or if it's actual LCD. No damage has been caused to TV

These only go 2 3RDS across the screen aswel they do t go all the way, not from what I can see.

=== ===

⟐ Commented May 19, 2025 at 0:14 MST

Any help would be appreciated thanks.

⟐ Commented May 10, 2025 at 4:45 MST

Any help would be appreciated thanks.

⟐ Edited by author May 06, 2025 at 10:46 MST

I checked it with a flashlight and it seems there's a faint image

The screen blacking out is happening randomly between 10 minutes and 2 hours

⟐ Answered April 16, 2025 at 14:24 MST

⟐ Commented April 03, 2025 at 21:40 MST

⟐ Answer edited March 27, 2025 at 3:04 MST