I have two electrical components on the motherboard that have come loose, and I'm looking for where I can buy a new motherboard.

I've searched everywhere on all the websites, but I can't find one.

Does anyone know where I can find one?

Thank

⟐ Commented August 31, 2024 at 4:43 MST

⟐ Answer edited June 12, 2023 at 11:04 MST

- Both speakers appear connected on bluetooth page on mobile device

-Both speakers appear connected on JBL connect app

- Both speakers firmware are up to date

- Iphone 7 IOS up to date

- Tried different mobile device and even a MBP had same problem

- Tried un-pairing, pairing again had same problem

- Tried reseting both speakers problem unsolved

- Tried turning off all bluetooth devices in the room as the sound keep cutting as if there is something interfering with it. Same problem

Can anyone help?

⟐ Commented October 07, 2021 at 20:41 MST

The speaker will only stay on for a couple of seconds unless it is plugged in. Sometimes, the power button won’t work, and I have to disconnect and reconnect the battery. The speaker plays the startup and shutdown noise, and I can play music through the aux. However, none of the other buttons or lights on the board work. The charging LED’s, the volume buttons, none of them; except the power button - and only sometimes.

I’d prefer to fix it instead of paying 150 dollars to replace the whole thing. I have checked that all the connections and ribbon cables are hooked up properly, and none of the board components are loose or damage now that the main board has been replaced. I know it’s a long shot, but does anyone have a suggestion? (Or even a link to the service manual that ISNT behind a paywall)

⟐ Commented July 31, 2021 at 11:36 MST

⟐ Answered July 15, 2021 at 19:12 MST

⟐ Commented July 15, 2021 at 2:13 MST

Thank You

⟐ Commented November 13, 2020 at 17:36 MST

⟐ Answer edited January 06, 2023 at 13:12 MST

My JBL Charge 2 + Splashproof has been with me for about 2 years now.

Its a great product and still fits my needs. However, right now I have noticed that it does not hold a full charge at all. The battery indicator starts at 60% (the top 4 lights are stable, the fifth blinks) even when the battery is completely drained.

The sound also crackles and breaks at high enough volume and the speaker just turns off indicating that there isn't enough battery left. I have also noticed a faint buzz or hum in the speakers when this happens.

Please let me know if this is a circuit board issue or a battery issue so that I know what to replace.

Thank you.

Yup, Turns out the battery is 1.5 times its normal size. It looks "puffed".

I disconnected it from the speaker and put it in my drawer. I’m keeping the puffed battery until I find the right one because I will need to match the polarity and specifications of the replacement. Any leads on where I can find it in Guangzhou, China?

⟐ Answer edited October 27, 2020 at 14:53 MST

my charge 2+ is a little wasted. It doesnt charge very well anymore. Charge status is also shown wrong. Shows full if empty. On little volume it works quite well. But if increasing volume it starts with a lot of distortion/noise and really sounds bad. This problem is more likely if not constantly on charge.

So I think it may be a battery problem?! Not the speakers. Because for a least some seconds it can work on all kind of volume. Do you think I should try put a new battery in it? Or can it be a mainboard problem?

thanks

⟐ Answered June 22, 2020 at 14:36 MST

⟐ Answered July 02, 2019 at 20:10 MST

⟐ Commented May 10, 2019 at 6:19 MST

the mainboard / amplifier of my Charge 2+ is out of order. It is selecting only one of the 2 speakers. A capacitor has broken. Soldering is not so easy, so i am searching for an alternative amplifier/mainboard.

Anybody an idea, where i can get one, original or alternative? And which alternative one can be used?

Thanks a lot, best wishes

Stephan

⟐ Commented December 27, 2018 at 1:16 MST