since yesterday I’ve issue with my induction hob - Beko HII64500FT - when I try to start it, it immediately turns off, details in youtube video below, does anyone know, where could be the problem or how to fix it?

https://youtu.be/WsZHKzdvcsI

⟐ Commented July 15, 2025 at 4:04 MST

My Induction plates fan died. I tried disassembling it but when I did, the UI PCB was partly glued to the glass top. It was retained by the connector so I disconnected it. I hadn't noticed that there were multiple possible connection point on that PCB and there are no markings.

So now that I'm assembling it back, I am left wondering which would be the correct connection point. How can I find this out?

See attached photos

Adding a few more photos of the teardown in case someone search for ifixit and that model name in case it's useful to them.

Originally I thought the fan was broken because there were a lot of pieces of plastic that were rattling around (from shipping this induction plate despite it being protected by foam in the package) but actually what broke is the plastic below each induction zone. I don't think it's a huge issue so will be testing the it soon (need to find time to hook it up)

⟐ Edited by author March 27, 2025 at 7:54 MST

It happened when a knife was dropped hitting the side.

Only small but noticeable

Thanks

⟐ Commented November 03, 2024 at 23:49 MST

⟐ Edited July 13, 2024 at 7:59 MST

It's working only 1300 digits

⟐ Commented November 18, 2023 at 6:41 MST

Please note that I have an Electrolux Induction Cooktop and the motherboard panel present with all the lights turned on.

I have replaced a used Board User Interface Assembly with the one that is constantly turned on, and it works!

My question is if I can reset the Board User Interface Assembly as it seems that the board is still functional and I would like to make this board operational.

Link with picture.

https://drive.google.com/file/d/114XCdED...

⟐ Answered July 26, 2023 at 15:56 MST

⟐ Commented September 27, 2022 at 8:10 MST