iFixit - Answers With Device "Impressa A9"

Impressa A9: Why is my coffee machine leaking water

Thu, 30 Nov 2023 16:50:54 -0700

My Jura leaks water when it is inserted in the machine but does not leak from the container when I leave it outside the coffee machine

⟐ Answered November 30, 2023 at 16:50 MST

Impressa A9: Jura A9 won’t turn on!

Sun, 28 Aug 2022 05:34:36 -0700

Hello everyone,

My Jura A9 acted weird lately, when starting brewing or grinder it would just shut off abruptly!

The other day that was it, it stopped working completely.

After opening it and following some tutorials i couldn’t find anything wrong inside. The grinder ok, the brewing unit ok, the swith (1) ok, the PCBA (2) ok no signs of burnt area, same for the pcba of the display, fuses (3) ok, thermocouple (4) ok… the only doubt I have is on the 2 capacitors (5) one of them makes a weird noise like a buzz noise. I do have a voltage but nothing, the machine won’t turn on.

Any idea on what I can check?

Thanks for your help.

⟐ Commented August 28, 2022 at 5:34 MST

Impressa A9: How to remove the cover plate?

Sun, 31 Aug 2025 14:18:45 -0700

Hello,

is there a tool or a trick to remove the cover plate.

It is too slippy to make it rotate counter clockwize by hand.

Thank you

⟐ Commented August 31, 2025 at 14:18 MST

Impressa A9: Water flow minimal. Won't make coffee or clean.

Fri, 25 Sep 2020 07:08:05 -0700

My Impressa A9 water flow has slowed to minimal since changing my filter again. This happened once before. Sent in for cleaning/repair $$$ but do not know what they did to fix it. No longer moves enough water to make coffee or clean. Sounds like pressure builds up but no water flow.

⟐ Answered September 25, 2020 at 7:08 MST

Impressa A9: touch screen not working

Thu, 28 Nov 2024 14:10:40 -0700

Trying to heat up water, but machine goes to coffee

Impressa A9: Half of the times water ends up in a dip tray instead of a cup.

Fri, 01 Sep 2023 06:26:14 -0700

Leaking water in dip tray, still makes coffee, but inconsistently. Grounds are wet

Impressa A9: Close cover error (on grounds chute). It is closed

Mon, 24 Oct 2022 17:26:14 -0700

The Close cover error is displayed. But all covers are closed. Machine won't move out of this mode. Have cleaned inside hopper flap as well as inside ground coffee chute

⟐ Commented October 24, 2022 at 17:26 MST

Impressa A9: Why switch off in using mode time ena 9

Tue, 08 Dec 2020 22:10:07 -0700

Hello I have Jura ENA 9 how can I repair the problem is in using time automatically switch off after making a cafe Thank you

Impressa A9: Jura Impressa A5 - grinder does not work

Wed, 18 Sep 2019 22:11:09 -0700

Hi all,

The grinder in my Jura a5 stopped working. I took the machine apart and tried powering the grinder directly - it works, but the machine does not power it up for some reason when operating normally.

Found a guy locally who replaced some triacs that apparently switch the grinder. It didn’t help. He diagnosed the circuit board and couldn’t find any issues, yet the grinder still does not work.

Any ideas?

Impressa A9: Why is my milk frother not getting milk hot enough

Sun, 21 Oct 2018 09:23:58 -0700

My milk frother no longer gets milk hot enough for a latte and the milk does not foam properly. I have cleaned everything that I can think of cleaning — including descaling and using the cleaner fluid for the frother. The frother works better (but not normally) when I use the cappuccino setting and the hot water function seems to work fine. When the frother is working to make a latte, a large puff of steam comes out at the beginning but then as it pumps, it appears to be pumping water (and not very hot) as well as milk. Is there a quick fix I am missing or do I need to take it to the dealer?

⟐ Edited by author October 21, 2018 at 9:23 MST