iFixit - Answers With Device "Hubsan X4 107L"

Hubsan X4 107L: My drone just blinks red and blue

Tue, 12 Jan 2021 23:38:56 -0700

My drones back lights will flash red and the top left will blink blue , will not fly either and tried a fresh battery , any help would be appreciated

⟐ Commented January 12, 2021 at 23:38 MST

Hubsan X4 107L: Drone is flying backwards why is That?

Wed, 16 May 2018 04:09:57 -0700

My drone flying is reversed all the air is pushing from the top so it stays grounded and doesn't go up what is the fix please

⟐ Commented May 16, 2018 at 4:09 MST

Hubsan X4 107L: one of my drones propeller is slower then the other

Sun, 24 Jul 2016 04:44:22 -0700

my drone won't fly rite how do I fix it?

⟐ Answered July 24, 2016 at 4:44 MST

Hubsan X4 107L: Why my drone does not fly high

Tue, 14 Mar 2023 03:58:00 -0700

it can only fly lower than 4cm

⟐ Commented March 14, 2023 at 3:58 MST

Hubsan X4 107L: Is it safe to ultrasonic barometer

Tue, 03 Jul 2018 00:32:40 -0700

Hi , i have a hubsan H107D+ , which is flying erratically , i taken it apart and it looks like the previous owner had tried to oil the motors or something !! , there are 2 boards, a PCBA receiver board and a 5.8 GHZ TX camera module which seem to be covered in a fine oil !! infact theres oil all over it inside .

I would like to put the boards through my ultrasonic cleaner but the PCBA board has a barometer on it (see photo)

Barometer Chip

Is it a big no no to run a barometer through a cleaner ?

⟐ Answer accepted July 03, 2018 at 0:32 MST

Hubsan X4 107L: How can I fix the connector from the drone to the battery?

Sun, 24 Jul 2016 08:58:20 -0700

Hi, my Hubsan x4, and many others I'm sure have a problem where the connection to the battery becomes dodgy thanks to the cables being pulled in and out repetitively. The connector is now broken and I'm wondering if I can order replacements or use anything else instead of the white plastic connectors. Thanks!

Gareth

⟐ Answer accepted July 24, 2016 at 8:58 MST

Hubsan X4 107L: My Hubsan X4 H107D props spin but it won't fly.

Mon, 11 Jul 2016 13:30:31 -0700

My Hubsan X4 H107D's props are functioning but the quadcopter won't take off. I thought it was from a crash that took place the day before in which I flew at a high altitude and then lost control resulting in hitting the ground extremely hard, but I am not sure because it flew fine after the crash. Just now when I turned it on today it stopped flying. If you know please help. I have only had this drone for about a day now. It would be great if some one could help.

⟐ Edited July 11, 2016 at 13:30 MST