⟐ Answered June 25, 2025 at 4:38 MST

⟐ Commented February 02, 2025 at 17:11 MST

Problem event name: startup repair offline

Problem signature 01: 6.1.7600.16385

Problem signature 02: 6.1.7600.1638

Problem signature 03: unknown

Problem signature 04: -1

Problem signature 05: SystemDisk

Problem signature 06: 1

Problem signature 07: MissingBootManager

OS Version: 6.1.7600.2.0.0.256.1

Locale ID: 1033

There are other system recovery options but I don't seem to get them working....Also my dvd/cd drive is broken so I can't install any cds.....

Please let me know if I have any options to get this laptop running back to normal.

Thnx so much for your help in advance

⟐ Answered August 18, 2020 at 16:17 MST

⟐ Answer accepted January 27, 2018 at 10:44 MST

⟐ Answer deleted February 11, 2016 at 20:16 MST

⟐ Answer accepted February 23, 2014 at 6:57 MST

⟐ Commented October 09, 2020 at 3:06 MST

Somehow i did try installing the latest driver i got from amd site,went well at first but it became laggy and keep restarting after the window log on.I havent found any solution for this problem so please help me i will really appreaciate your kindness and also forgive me if something is wrong with my english..A really big thank you for those who's helping

⟐ Answered February 09, 2016 at 0:01 MST

On the screen when I turn it on just has a blinking cursor.

Thank You all for your input... It turned out that the hard drive is dead. I installed a known working drive and it would not power up. As a result I'm trashing this laptop and selling it for parts.

Thanks again for your help

⟐ Answered July 02, 2018 at 6:10 MST

⟐ Answered June 18, 2023 at 7:45 MST

⟐ Answered October 10, 2020 at 17:42 MST

⟐ Answer edited October 11, 2022 at 1:45 MST

⟐ Answer accepted November 12, 2017 at 10:02 MST

Thanks

⟐ Answered January 19, 2017 at 2:44 MST

⟐ Answer accepted November 29, 2024 at 1:40 MST

⟐ Answered May 10, 2024 at 9:11 MST

⟐ Answered June 11, 2022 at 18:46 MST

So I've got a dv1744tu, I've put a new CPU in (T1350 —> T2300E), then it wanted to do nothing. No POST, nada.

My immediate thought is to try cleaning the RAM sticks, as they failed a lot for me prior to the CPU upgrade. Cleaned it, didn't work. I later got 2 sticks of 1GB DDR2 800 Hynix RAM modules to see if replacements will work, nope, not at all.

Here’s some findings while I was working on this problem:

• No, the display’s backlight is not dead. Obviously I tried pointing a flashlight at it.
• The CPU should be alive - as if I remove the RAM sticks, it will throw me a 4 beep code (no RAM found)
• The LEDs (caps lock, volume, and MMC LED) will blink once after I press the power key, which is normal behavior
• The fan will not spin, so the CPU starts heating up
• There is disk activity for the CD and Hard Drive, the CD drive does spin up on boot and stop (which is normal), and the hard drive just keeps on spinning as if you just plugged the power connector onto it
• I've tried resetting the CMOS and the classic power button electricity release methods, didn't work
• The CPU I upgraded did POST once, but it was a painfully slow POST and after I shut it down, it turned into the above
• I tried swapping back to my old CPU, same behavior

⟐ Commented May 15, 2021 at 6:06 MST

⟐ Answer edited February 12, 2020 at 22:14 MST

⟐ Answer accepted October 11, 2019 at 4:45 MST