⟐ Answer edited November 21, 2020 at 7:03 MST

At first it was working fine, i usually played heavy games on it, i faced no issue.

I turned it on some morning (about 2 years ago) and it just booted normally and after sometime the screen started flickering and it shutdown. It wasn't overheated or spilled with water or anything, it just suddenly stopped.

I've tried many guides by replacing the ram, removing the battery, changing the hard drive everything

Keeping in mind

1) It's power supply is perfect

2) It's ram was new

3) Hard drive was working correctly

The thing is if I try to start it the power light turns on and stays on but the screen remains blank, I don't hear the fans spinning and the keyboard doesn't light up.

I'm suspecting that it's a power issue as the motherboard doesn't receive power but at one side the usb port is working but on the main side where there are 2 usb ports, hdmi, and power port is not working (power port does receive power)

This has been ging on for a few days and I haven't really taken it anywhere for repairing because the people in my country are not very skilled and it's just a big risk.

Any help will be appreciated! Thanks.

⟐ Commented June 09, 2024 at 21:42 MST

Here’s a photo of the actual laptop.

Most disassemble guides don’t include the screen, I need to know how since on left bottom part of which the monitor/screen that connects to the main body of the laptop have somewhat loosen, more specifically its the part on which it holds the screen whenever its closing or opening, it has three screws and all three came out cause there’s a crevice that forms every time I close the laptop which I could somewhat close by pulling the screen lightly enough. I could provide a photo of the crevice later on if someone is interested on that, later this day.

Around this place.

In short I simple need to know if there’s disassemble guide on which includes the screen, I want to see if I can somewhat fix the problem I have. Thank you in advance.

⟐ Answer edited April 17, 2022 at 22:51 MST

⟐ Answered January 31, 2026 at 12:12 MST

This is what I tried:

• Cleansed and reapplied the paste on CPU and GPU
• Removed RAM modules, switched their positions, tried one by one
• Disconnected the screen ribbon cable and reconnected it
• Tried a lot of arcane shortcuts such as powering up while pressing Win + B, Win + V, ESC, F2, F10
• Removed the Wifi card, the SSD and HDD
• Removed the battery, pressed the power button for 60 seconds
• Removed the battery, pressed the power button for 60 seconds and let the laptop sit like that for a couple of hours

I tried all of these things at least twice. Nothing worked. This is the behavior I'm seeing:

1- Without SSD/HDD

It turns on (no screen), and does nothing until I turn it off

2- With SSD/HDD

I turn it on, it immediately turns off. Then it turns on by itself for about 6-10 seconds, then off. Finally, it turns on and remains on until I turn it off. When this happens, I can see the HDD led blinking as if there's activity happening at random intervals, much like when Windows is loading. Fans also spin at regular intervals.

I'd like to know if this is officially dead or there's something else I can try. I should mention there's no CMOS battery and the CPU and GPU are embedded, also the CPU doesn't have an integrated GPU. And yes, I know I might have f****d it up because I didn't remove the battery. However, it's also a long shot that this would've unequivocally fried the mobo. So it'd be great to explore all possibilities.

⟐ Commented September 15, 2024 at 3:55 MST

Need battery optimiser settings to set battery to charge to 85%….current at latest bios version but only seeing adaptive battery setting enable or disable (enabling it still lets my laptop to charge to 100%)

⟐ Answered July 18, 2023 at 9:20 MST

⟐ Answered June 09, 2023 at 9:42 MST

⟐ Answer accepted June 07, 2023 at 0:56 MST

how should I do this

⟐ Answer accepted September 08, 2021 at 19:13 MST

⟐ Answer edited July 28, 2020 at 23:36 MST

⟐ Answered March 15, 2023 at 14:18 MST

I take off the mather bord from and i fond som missing caps and som burned places o the mather bord so i replaced every faulty component by my self and the pc just work fin look at my answer to see the imges

⟐ Edited by author May 07, 2023 at 19:22 MST

I left it for a week to dry out (now realising that was a mistake) and still got no response. A few things to note, when the battery is pluged in aswell as the charger the battery light slowly blinks orange and pressing the power button doesn’t turn it on. when I unpluged the battery and then connected the charger, it still wouldnt turn on, but now the orange blinking turned white and was blinking faster. I guess there still is some life in it.

I know it will be costly, and i dont even know if it can be repaired. I contacted HP and told them about this and they directly pointed me in the the direction of buying a new laptop…

if anyone knows what the problem is and whether it can be repaired, this will be some great help.

⟐ Answered January 08, 2023 at 22:26 MST

It's not that it just won't turn on, the charging light (the little LED near the power plug in HP laptops) doesn't even light up. I've tried a new AC-IN plug and that didn't make a difference.

I have a 200W HP-brand power adapter, which gives out the appropriate juice.

What else, down the line, could've failed and how do I test it?

⟐ Answer edited September 24, 2025 at 17:45 MST

Thanks ahead

⟐ Commented July 16, 2023 at 17:05 MST

⟐ Answered March 05, 2021 at 13:27 MST

While I’m trying to open Nvidia GeForce Experience application, I got a message that “Something went wrong. Try rebooting your PC and then launch GeForce experience.

ERROR CODE: 0x0001

Help me out !

⟐ Answer accepted January 13, 2021 at 11:53 MST

Thanks.

⟐ Commented November 20, 2018 at 20:52 MST

Replaced the battery of my 2019 bought new Omen 15-dc1007na as cells badly swollen but puzzled the battery screws from new just sit in holes and do not screw in, they are 2 mm screw thread length and 1.6 mm thread OD by micrometer.

Are they an M size, if so what is the spec required as the range differ by only 0.2 mm. The back plate screws look to be 2 mm OD.

Thanks
David

⟐ Commented May 02, 2026 at 8:31 MST

⟐ Answered February 16, 2026 at 20:25 MST