iFixit - Answers With Device "HP Color LaserJet CP1215"

HP Color LaserJet CP1215: Always loose blank page

Thu, 28 May 2020 09:39:57 -0700

Always release a blank page, even when the test page is requested… All tones are new

HP Color LaserJet CP1215: The printer ready light is on but a triangular light flashes

Sun, 28 Jul 2019 08:07:36 -0700

Printer ready light on but triangular readish light keeps blinking and the printer do not initialises

HP Color LaserJet CP1215: Why won't a second sheet of paper feed through?

Tue, 11 Jun 2019 18:04:33 -0700

I have a HP CP1215 and a HP CP1518ni. Both have developed a similar problem, though with the CP1215 the problem has gone to the point of being unable to print.

After printing one sheet, the printer is unable to grasp a second sheet and pull it through the system. Sometimes it will just not pick up the sheet at all, and other times it will grab two pages, with a pause between the two pages. In either case, the printer diagnoses this as a paper jam (whether there is actually a sheet partially fed or not, and so everything has to be opened up.

I cannot see the paper feed rollers to see if there is some kind of build-up or deterioration on these. With the CP1215, I cannot get it to grasp a sheet at all, either from the tray or the bypass.

This problem seems to be present for all paper weights and regardless of smoothness. I want to either repair myself or find someone who can repair it.

HP Color LaserJet CP1215: How to fix printing shadows, the upper left is mostly good

Sat, 05 Nov 2016 06:01:11 -0700

how to fix printing shadows, the upper left is mostly good but then it starts shadows start in red color and if i print a picture it will be blurry. have tried to calibrate but did not work, called HP but that was a joke. they just wanted me to buy a new printer. also i have changed the cartilages a couple of times. Help please!!

HP Color LaserJet CP1215: Attention and black toner blinking. Not able to print

Sat, 28 May 2016 19:02:31 -0700

I've tried the hard and soft resets and the same error happens. I actually got it to print a picture and a test tone page after a dozen attempts but that seemed to be a fluke. At least I know it has plenty of black toner still. Also swapped another color with the black and the black toner light still blinks along with the attention light. I think something that reads the black toner cartridge is screwed up. Any ideas? BTW I'm using Windows 10 and can't figure out how to install HP's "toolbox" program.