iFixit - Answers With Device "Gigaset Phone"

Siemens Gigaset S810: Why does my phone 810/A cut out after around 10 minutes talking?

Sun, 11 Dec 2022 16:40:10 -0700

I've checked the battery status and it shows 34-66% (p19 of Op Guide). How to fix the p0roblem. It affects two of my four phones.

⟐ Commented December 11, 2022 at 16:40 MST

Siemens Gigaset S810: How can I fix my phone speakers?

Mon, 03 Feb 2025 16:47:22 -0700

Hi guys,

my phone speaker is so low that I have to use the loudspeakers to understand the calling party. The phone speaker volume is at max and I have no hearing disability. Does anyone know how to fix this?

Thanks in advance,

Florian

⟐ Commented February 03, 2025 at 16:47 MST

Gigaset Phone: Sudden discharge of battery

Wed, 24 Jan 2018 11:15:31 -0700

The handset appears to be fully charged. Suddenly during use, it goes dead. When I put on the charger it shows that it is completely discharged and requires several hours charging. I have already changed to new bateries but it still happens. How can a battery completely discharge suddenly like that? Is there a solution?

⟐ Commented January 24, 2018 at 11:15 MST

Gigaset Phone: My batteries are fully loaded, but when I take out the handset it dies

Tue, 18 Dec 2018 05:08:22 -0700

Fully charges handsets from the Gigaset 510, but when i take one of the handsets out of the cradle it dies. And when im putting it back in the cradle it starts loading again. Sometimes it works fine and sometimes it dies. Could it be a lose contact in the phone? Does anyone knows how to open this phone?

⟐ Answer accepted December 18, 2018 at 5:08 MST

Siemens Phone: Je n'entends plus mes interlocuteurs

Mon, 23 Sep 2024 14:52:07 -0700

Je n'entends plus mes interlocuteurs mais eux m'entendent. Je viens de changer les piles.

Translation French - English

I can't hear the people I'm talking to

I can't hear the people I'm talking to, but they can hear me. I've just changed the batteries.

⟐ Commented September 23, 2024 at 14:52 MST

Gigaset Phone: will not connect to caller

Fri, 26 Jan 2024 09:46:26 -0700

My Gigaset E630HX will not connect to a caller phone rings pick up but the flashing phone ringing icon on phone just keeps flashing .

But I can ring a number and it connects ok.

Had phone a couple of months How can I reset phone when I cant remember the pin

Rosemary

⟐ Answered January 26, 2024 at 9:46 MST

Gigaset Phone: Gigaset C430A shows "Please check phone connection"

Thu, 06 Oct 2022 08:05:10 -0700

During a thunderstorm, the power supply to my C430A base unit was zapped (so, incidentally, was my router and phone master socket- both now replaced by BT and working). I have obtained a second-hand power supply for the C430A, and everything works (saved numbers, paging handsets, handset identities, handsets connect to base station) EXCEPT that the base does not see the phone line. Other phones work ok in the same socket. I've tried to have a look inside (removed the 4 star screws) but can't open it up. Any suggestions please?

⟐ Answer edited October 06, 2022 at 8:05 MST

Gigaset Phone: Gigaset 620A handset freezes.

Tue, 20 Nov 2018 04:27:04 -0700

It only affects the main handset. The others work fine. I fix it by removing the battery and replacing it. Is there a permanent fix?

⟐ Answered November 20, 2018 at 4:27 MST

Gigaset Phone: Answering machine icon flashes and answering machine stopped working

Wed, 23 May 2018 08:01:52 -0700

We have the Gigaset DX800 All in One and we have several problems with it.

The most important one is that the icon of the answering machine flashes and it says there are 2 messages but we cannot listen to them, delete them or anything. When we try to listen to them we just hear a beep and it pushes us out again. It's also not possible anymore to leave a message when people call us.

Another problem is that when people call, the number sometimes keeps on hanging in the screen but person already hanged-up the phone.

Does anyone has experience with this and knows how to solve it. The isn't any costumer support for this.

⟐ Commented May 23, 2018 at 8:01 MST

Siemens Phone: My phone shows silent

Sat, 07 Jun 2025 01:03:16 -0700

I have a gigaset. The base rings. The handheld set marks silent. There is also a little x on the screen next to the phone

Please help.

⟐ Commented June 07, 2025 at 1:03 MST

Siemens Gigaset C47H: Satellite phone not working

Tue, 11 Feb 2025 07:37:41 -0700

why cant I make or receive calls on satellite phone

⟐ Commented February 11, 2025 at 7:37 MST

Siemens Phone: static on dropped handset Siemens 5455

Tue, 18 Apr 2023 04:52:51 -0700

I dropped my Siemens 5455 handset and now I have static on that phone-how can I fix this?

Gigaset Phone: Where can I send my SL450H for repair?

Sat, 03 Sep 2022 02:30:43 -0700

I have dropped my SL450H it works but no display where can I get it repaired?

Gigaset Phone: GIGASET S850H doesn't turn on

Sat, 02 Jan 2021 08:33:35 -0700

So my wireless landline phone piece no longer turns on.

The only life indication I can see is that when you put the batteries in. the green button flashes once. Another is clicking the green button makes the red button flash once.

I’ve tried charging it, changing batteries, and connecting it to a computer.

I’ve also opened it up and by visually inspecting it I can see no bad components.

Anyone got any ideas?

Gigaset Phone: Siemens Gigaset charger interface (A130 / A220)?

Mon, 25 Nov 2019 18:38:40 -0700

Anyone knows what the (old) Siemens Gigaset DECT handsets require from the charging cradle?

I would like to convert a A220 base to a charger cradle - but can’t quite figure out what the handset needs. Seems there’s a simple transistor circuit and a 22R series resistor in the base. Might be controlled - or might just be a short circuit protection? Have no supply for the unit - so I’m not even sure of the voltage levels… Anyone has a clue? Or a schematics (ie. of the charger cradle, the base station, or the handset)?

Gigaset Phone: How I can fix my Display of my Gigaset160?

Sat, 08 Dec 2018 02:13:17 -0700

how can I repair my display AND my graphics card ?

when I want to restart it comes a bright light and is black again.

What can I do against it?

Gigaset Phone: A510 IP. why won't the base stay on?

Tue, 30 Jan 2018 19:05:48 -0700

it used to work fine but now the base that plugs into the router only stays on for 10 seconds. When I turn the power point on the light comes on then turns off again. I have tried different power points. I got a replacement and it is doing the same so I have no idea what is going on.

Siemens Gigaset S810: Communication impossible: message = connection lost

Wed, 09 Nov 2016 06:45:32 -0700

After I dial or when I receive a call, the connection seems to be made up to one ring, then a sound occurs, a red cross shows up on the screen with the message "connection lost". What is the problem ? (This has happened all of a sudden, my handset was working perfectly fine before)

⟐ Commented November 09, 2016 at 6:45 MST