iFixit - Answers With Device "Food Processor"

Thermomix TM5: Dial jumps when selecting speed temp etc

Sun, 29 Mar 2026 10:52:40 -0700

I have one of these, it is working fine Except for the dial. Selecting an adequate temperature or time is kind of a minigame. For one dial step sometimes goes back and forth, sometimes does the right thing or sometimes makes a big bump. I was bearing with it because it was just an annoyance, but has been three onions that I only wanted "chopped" and I ended with them utterly pulped because the dial decided it.

I guess I only need to clean contacts, but before try to tear it I was hopping if someone here has some experience, If it is an easy task or if does not worth it.

⟐ Answered March 29, 2026 at 10:52 MST

Thermomix TM5: How can I fix error c208?

Fri, 27 Mar 2026 05:07:22 -0700

My wife closed the device without the bottom lid and after 3 seconds the device shot down, stuck bowl, making clicking noise and code c208 pop up. I dried the device, put it back in place, got out the bowl manually, and put it back into the place. Plugged in, but c208 shows all the time. Official troubleshooting guide says it’s locking mechanism: repair when the error continues to appear.

However there is no further instructions on how to repair it anywhere in the internet. Can someone help me ? Much appreciated.

⟐ Commented March 27, 2026 at 5:07 MST

Thermomix TM5: My problem is C 32

Sat, 07 Feb 2026 12:33:07 -0700

My Problem is c32

Food Processor: Kenwood FP730 Food Processor has suddenly stopped working

Sat, 24 Jan 2026 06:54:05 -0700

my Kenwood FP730 Food Processor has suddenly stopped working. i have checked the obvious like the fuse in plug.

Does anyone know what might be the issue with this item.

Whilst it's not an expensive item it just seems a shame to throw it and all the accessories away if a simple part replacement might fix the issue.

Regards

Dave

Thermomix TM5: Should I self repair the TM5 scales?

Sun, 18 Jan 2026 21:19:52 -0700

The scales stopped working by just showing 0000 or max limit weight figures when pressing the lid down. A few days later the scales seem to have recovered its sensitiveness yet it appears to be too sensitive and readings show changes even when untouched.

Is it at all worth attempting to repair it or send it to be repaired?

⟐ Commented January 18, 2026 at 21:19 MST

Food Processor: How to open the cover and change the belt Food Processor190 Kenwood

Mon, 12 Jan 2026 04:20:38 -0700

I have fp190 krnwood which is good but the belt is defective and I want to change ,how can I open the cover and change the belt thanks

⟐ Answer accepted January 12, 2026 at 4:20 MST

Braun multipractic: How to remove on/off switch Braun K600

Fri, 12 Dec 2025 18:01:10 -0700

Hello,

I have a Braun K600 Food Professor. It has an on/off knob. Through the centre of this knob is a pulse button.

The rubber membrane the prevents dirt going into the gap around the button has come off the knob. I am sure it will pop back on if I could take the knob off however, I can’t see how to do it. I’ve tried pulling it off, but it seems to firmly on for it to be a friction fit.

the button has come off the knob. I am sure it will pop back on if I could take the knob off however, I can’t see how to do it. I’ve tried pulling it off, but it seems to firmly on for it to be a friction fit.

I’m wondering if anyone is actually familiar with this knob and could advise me

⟐ Commented December 12, 2025 at 18:01 MST

Cuisinart DLC-8F: My motor works but the motor shaft stick broke off. How can I find ano

Sat, 06 Dec 2025 11:57:45 -0700

My motor works but the motor shaft stick broke off. I need another. Help!

⟐ Commented December 06, 2025 at 11:57 MST

Thermomix TM5: Thermomix TM 5 Error C142

Wed, 26 Nov 2025 22:06:40 -0700

Hello, my thermomix still shows error C142. After turning on and attempting to turn on the speed, you can hear the engine trying to move its arms and error C142 appears.

⟐ Commented November 26, 2025 at 22:06 MST

Black and Decker PowerPro II FP1510: Can't remove cup/container from base.

Wed, 05 Nov 2025 13:52:22 -0700

I can't remove the cup from the processor. I've jiggled it back and forth with lid on then off...no luck. It's stuck. Please help.

Food Processor: Ginnys brand food processor

Sat, 01 Nov 2025 07:19:12 -0700

My food processor 10 in 1 doesn't spin. My Mom over loaded the processer and now the spinner doesn't spin. Motor works and I can see that internally it is spinning but the white top that is visible doesnt. I can't find anything in the guide. It says Intertek inside but can't seem to find much help from their website either. It looks as if it's a single unit with the spinner to one side. Please help

⟐ Commented November 01, 2025 at 7:19 MST

Thermomix TM5: How to reset the C150 error?

Wed, 06 Aug 2025 13:17:07 -0700

My TM5 shows a C150 error message and immediately shuts down. The problem is a stuck/broken lid sensor. After repairing the sensor the TM5 still shows the error so it must be stored somewhere in the device. How to reset this error store? There are some ebay crooks “selling” you the C150 reset for a hundred bucks so it must be able to be done somehow. Any ideas are appreciated. Just exercising my right to repair.

⟐ Commented August 06, 2025 at 13:17 MST

Original 7QT Cuisinart Food Processor: How to replace a power cord on a Cuisinart Model DLC-X-plus (E)

Sat, 12 Jul 2025 00:08:46 -0700

How to replace a power cord on a Cuisinart

Model DLC-X-plus (E)

⟐ Edited July 12, 2025 at 0:08 MST

Original 7QT Cuisinart Food Processor: Power cord needs replacement

Fri, 11 Jul 2025 12:28:39 -0700

The power cord to this dlc 7 Cuisinart food processor is cracked and wire exposed. Needs replacement.

⟐ Answered July 11, 2025 at 12:28 MST

Thermomix TM5: My TM5 will not power on

Mon, 16 Jun 2025 19:25:04 -0700

Working TM5 had an error code about the pins from the bowl, cleaned them with WD40. Worked afterwards. Turned off TM5

TM5 will not turn on, Ive tried unplugging, holding start button for 30 secs (soft Reset) but still not starting.

Advice Please or a Vid, Thanks in advance

Braun multipractic: The central spindle is split.

Fri, 16 May 2025 07:19:58 -0700

I managed to split the central axel due to a very hard piece of cheese. The split has spread out so the tools won’t go on. I have another machine to replace it, but I was cheated as this doesn’t work either. But it can be used for spares. Is there anything you can advice me on, or help me get this repaired somehow? I am in Manchester M9.

⟐ Answered May 16, 2025 at 7:19 MST

Thermomix TM5: Fluids in the electric motor

Fri, 09 May 2025 01:52:50 -0700

Ive stripped down my TM 5 and have found fluid cream deposited in the motor, contact cleaner won't budge it, Ive removed the bolts from motor, but still can't separate, any ideas tx

⟐ Answered May 09, 2025 at 1:52 MST

Black and Decker PowerPro II FP1510: Food processor is not working

Sat, 15 Mar 2025 21:47:48 -0700

I got it as a gift but did not used it for over a year. Now when I want to use it, it does not work. Is there anything that I can look at, repair it myself, find out why it does not work?

Thanks

⟐ Commented March 15, 2025 at 21:47 MST

Food Processor: Panasonic جهاز معالج الطعام لايعمل

Tue, 04 Mar 2025 23:15:12 -0700

Panasonic

جهاز معالج الطعام لايعمل

⟐ Edited March 04, 2025 at 23:15 MST