iFixit - Answers With Device "Fisher and Paykel Aquasmart Washing Machine"

Fisher and Paykel Aquasmart Washing Machine: needs a service error 130

Fri, 07 Jul 2023 18:02:59 -0700

machine starts then shows needs service error 130

⟐ Answered July 07, 2023 at 18:02 MST

Fisher and Paykel Aquasmart Washing Machine: Fault in lock when trying to rinse or spin

Wed, 19 Feb 2020 15:54:52 -0700

Won't spin or rinse due to lock coming on did settings said nothing the model is w80t65c

⟐ Commented February 19, 2020 at 15:54 MST

Fisher and Paykel Aquasmart Washing Machine: Not completing spin cycle

Sat, 17 Aug 2024 18:02:58 -0700

machine seems unbalanced no matter how often I re arrange the contents. It stops on rinse and beeps, and won’t move forward- progress- with the cycle. Happens more often than not recently.

Unsure why is now unbalanced. Machine is one of the earlier ones (low agitator)

F&p Aquasmart WL70T60D 92127-A-NZ

Aso during the rinse and spin it thumps and bashes around really badly before stopping and beeping and the rinse light stays on, or if I progress it to spin does the same until it stops with the spin light on - and the clothes are still wet.

Been doing it for the past 4 washes perhaps.

I have done two auto tub cleans

F&p Aquasmart WL70T60D 92127-A-NZ

I have replaced the straps that attach in the four corners but hasn't helped

⟐ Commented August 17, 2024 at 18:02 MST

Fisher and Paykel Aquasmart Washing Machine: What is fault 49

Fri, 11 Aug 2023 03:14:39 -0700

What dose I need a service ,fault 49 mean .

⟐ Commented August 11, 2023 at 3:14 MST

Fisher and Paykel Aquasmart Washing Machine: How long will the replaced suspension rods and rubber straps last

Wed, 09 Oct 2024 22:30:25 -0700

I have a 6 yr old Fischer paykel top loader, which started acting up when it was 5.5 yrs old by giving the classic "load out of balance " message on the rinse and spin parts of the cycle. Since at least 4-5 months, I have successfully done laundry by "manually " placing clothes in drum so that it remains balanced during rinse and spin times each. The load gets done but now I have to do this with only half my regular load of clothes as it is becoming harder to distribute equally when there are heavy jeans and light weight tees in the same wash. Also this takes too much of my time to do it manually as it can be a hit/miss situation. Now, I have seen the replacement instructions here, appears like an easy thing but I want to know how long this repair will last? Will it give me another 5 years? If these washers are expected to last 12-15 years, does this mean I would have to replace the rods 2 times before end of its life?

I am asking this because I want to consider getting rid of my fischer paykel and buying a new different design and make rather than keep replacing multiple times.

Essentially, if my hubby helps me it will be only around 100$ for replacing the rods and braces, but if I call the service tech , it will cost around 350$ which is half the price if this machine. All the top loaders in the market seem to have no agitator in the middle and it seems that is where all of them fail to perform flawlessly (my old Fischer paykel with agitator lasted 16 years without any repair and as good as new. ) While top loaders save my back from bending, I am frustrated with the faulty no agitator design and am planning to get a front loader of a different brand that does not need any repair, period ( I am told that is impossible to find but I am hopeful).

Knowing how many replacements will be required in the lifetime of my Fischer paykel may help me decide whether I should bother replacing the rods and spacers or just buy something different instead.

⟐ Answered October 09, 2024 at 22:30 MST

Fisher and Paykel Aquasmart Washing Machine: do you think it's possible for me to change it?

Fri, 22 Apr 2022 11:22:50 -0700

I washed a couple of area rugs an now it gets NO water an beeps fault 49. The water inlet valve jus arrived, do you think it's possible for me to change it? Could yall help me?

⟐ Answer edited April 22, 2022 at 11:22 MST

Fisher and Paykel Aquasmart Washing Machine: How do you disassemable the machine to change suspension rods

Sat, 23 Oct 2021 09:16:35 -0700

Fisher and Paykel Aquasmart Washing Machine WL4227J1

How do you get to the suspension rods on this machine?

⟐ Answer edited October 23, 2021 at 9:16 MST

Fisher and Paykel Aquasmart Washing Machine: How do I clean and repair the solenoid water valves?

Sat, 11 Feb 2017 21:04:25 -0700

I live in an area where the water has a high mineral content. The solenoid valves do not seat and leak. How do I access the valves? Can I dismantle and clean the valves? Are these valves a diaphragm or a spool valve? Can i fet parts or must the valve be replaced as a unit?

⟐ Answered February 11, 2017 at 21:04 MST

Fisher and Paykel Aquasmart Washing Machine: It won't fill or pump out water

Sat, 11 Feb 2017 21:07:46 -0700

started filling and has now stopped and won't spin or pump out water. I have check water filters and water input. What could be the problem

⟐ Answered February 11, 2017 at 21:07 MST

Fisher and Paykel Aquasmart Washing Machine: What does error 234 mean

Fri, 07 Jul 2023 17:53:28 -0700

Hi,

Could you please advise what error 234 means on my touch screen, Fisher and Paykel washing machine means? If so how do I fix it?

Thank you so much!

⟐ Answered July 07, 2023 at 17:53 MST

Fisher and Paykel Aquasmart Washing Machine: What does the spanner symbol mean next to the power button

Tue, 03 May 2022 01:14:23 -0700

My wl70t60d machine turns on but won't work. When I stopped it beeped about 10 times and then the spanner lit up next to the power button. What's wrong?

⟐ Answer edited May 03, 2022 at 1:14 MST

Fisher and Paykel Aquasmart Washing Machine: Displays Out of Balance and then stops

Sat, 04 May 2024 01:10:59 -0700

Fisher and Paykel Top Loader Model: WA8560E1.

The machine stops and displays "Out of Balance" even if only a few clothes in it mostly at when Time to Go display is 27 and 10. Tried many times to reshuffle clothes in it and press "Start/Pause" button. It starts working and stops again with the same message. Kindly help.

⟐ Answer edited May 04, 2024 at 1:10 MST

Fisher and Paykel Aquasmart Washing Machine: Machine has error code 245?

Fri, 22 Mar 2024 19:44:01 -0700

Aquasmart washing machine is coming up with error code 245 ? Please explain this, thanks

⟐ Answered March 22, 2024 at 19:44 MST

Fisher and Paykel Aquasmart Washing Machine: My LED screen is blank but my machine still works.

Mon, 04 Mar 2024 23:56:07 -0700

How do I fix this issue?

⟐ Answer edited March 04, 2024 at 23:56 MST

Fisher and Paykel Aquasmart Washing Machine: Why is my machine leaking a small amount during the feel cycle?

Tue, 14 Nov 2023 09:18:15 -0700

I just replaced the suspension rods per your instructions and it fix the out of balance problem! Thank you! Now, however, the washer is leaking a small amount of water under the bottom of the machine when it starts the fill process. Can you tell me what could be causing this?

⟐ Commented November 14, 2023 at 9:18 MST

Fisher and Paykel Aquasmart Washing Machine: water filling the machine is just dribbling.

Mon, 10 Jul 2023 15:23:23 -0700

Water to the machine is fine but the water filling the machine is just dribbling so the machine is cutting off because it's taking to long to fill. Any suggestions please

⟐ Answer accepted July 10, 2023 at 15:23 MST

Fisher and Paykel Aquasmart Washing Machine: How to fix my Aquasmart

Fri, 07 Jul 2023 17:50:26 -0700

My Aquasmart has been wonderful until now. When I turn on my washing machine it releases water and then stops, releases water and then stops. Want to fix it myself as have had it for a long time and by the time I call someone out I might as well buy a new one. Hope someone can help. Maybe it's the out of balance maybe the computer board, not really sure. Any help would be greatly appreciated.

⟐ Answered July 07, 2023 at 17:50 MST

Fisher and Paykel Aquasmart Washing Machine: Fault 49 - won’t stop beeping

Fri, 07 Jul 2023 17:48:15 -0700

I have fault 49 on my fisher and paykel washing machine - i have replaced the inlet valve with a brand new one but the washing machine is still beeping the error as soon as i turn it on and won’t do anything else? do i need to reset it or something. Everything is hooked up but it still is flashing error and won’t work

WA65T60GW1 92164-A Fisher and paykel

⟐ Commented July 07, 2023 at 17:48 MST

Fisher and Paykel Aquasmart Washing Machine: light on the power is still showing the spanner symbol.

Tue, 19 Nov 2019 09:09:37 -0700

My Fisher & Paykel washing machine just came up with the above problem today. I've tried the above solutions but the light on the power is still showing the spanner symbol.

⟐ Answer accepted November 19, 2019 at 9:09 MST

Fisher and Paykel Aquasmart Washing Machine: Retrieving objects crom clothes washer

Sun, 18 Aug 2019 06:15:32 -0700

How do you retrieve a fine chain necklace from a Fisher-Pykal clothes washer?

⟐ Answer accepted August 18, 2019 at 6:15 MST