iFixit - Answers With Device "Epson XP-410"

epson xp-410: New ink installed, will not print --?

Tue, 27 Aug 2024 07:56:19 -0700

Black ink was full, but would not print. Cleaned print heads, and only red printed boxes. Cleaned heads 4-5 times, still no ink on paper. Printer acts and sounds like it's printing, but nothing come out on paper. What to do?

Edit: "All 4 cartridges were replaced with Epson brand cartridges."

⟐ Commented August 27, 2024 at 7:56 MST

Epson XP-410: Printer says Paper is out and wont print

Fri, 13 Sep 2024 07:49:31 -0700

My printer has been acting up and saying that the paper is out and to load more paper. However, there is paper in the printer. The printer can't get it feed through and actually print. I can hear it try to grasp the paper when trying to print. How can I fix this?

⟐ Answer accepted September 13, 2024 at 7:49 MST

Epson XP-410: My printer is will not print.

Fri, 23 Jul 2021 15:52:13 -0700

My Epson XP-410 printer will not print. Says it must be connected to the WiFi which it is. I have installed a new driver and updated the firmware. When doc is put in queue is says error. This printer is the default. What do I do next?

⟐ Commented July 23, 2021 at 15:52 MST

Epson XP-410: How can I fix error code 0x9A

Mon, 18 Apr 2022 14:12:43 -0700

I have an Epson XP-610 that was in storage for 2-3 years. I pulled it out to see if it still works, to give to my uncle. Everything worked but it wouldn’t print - every sheet came out blank. After researching why it wasn’t printing, I determined the printer block was clogged with dried ink. Researched that and followed the procedure to put paper towel under the printer head and force water through the ink ports. Too cumbersome and time consuming. Followed instructions on how to remove the printhead and soak it in warm water to remove the ink. Took about 45 minutes to get clear water. Reinstalled the print head and when I turn on the power it says “Internal problem. Turn the power off. Error code 0x9A. Followed Epson website recommendations but nothing works. Followed suggestions made on internet. Still nothing works.

Is there any way to determine what might be causing the error? I’m pretty sure I got the wire cable back the way it’s supposed to be. Don’t know where else to look. I’m not going to take it in because it’s not worth the cost to have someone fix it. I’d like to take it on because I have nothing else to do and like the challenge.

Any suggestions appreciated.

⟐ Answered April 18, 2022 at 14:12 MST

Epson XP-410: What Ribbon Cable To Buy

Mon, 16 Sep 2024 13:07:03 -0700

NOTE: I actually have the Epson Express XP-310 but it wasn’t listed so i chose 410.

There’s a White Ribbon Cable that splits into two and connects to the ink cartridge tray. Well, one of the ends tore off rendering the whole cable useless and i don't know where to buy another cable like it or what kind I need. Anyone know? I cant afford to buy a whole new printer nor do i really want to just for something minor like this. I’ve attached pictures to help out.

- the white ribbon cable with [i think] its serial number

- the two split ends

- the two ports where the ends connected to the tray

⟐ Answer edited September 16, 2024 at 13:07 MST

Epson XP-410: Why do I have stripes when I print

Fri, 13 Sep 2024 07:49:26 -0700

Why do I have white stripes when I print

⟐ Answer accepted September 13, 2024 at 7:49 MST

Epson XP-410: Why wont my printer copy or print

Thu, 27 Jun 2024 20:48:29 -0700

I can not get my Epson printer to print or copy any suggestions?

⟐ Answer edited June 27, 2024 at 20:48 MST