⟐ Answered December 04, 2025 at 6:31 MST

⟐ Answered March 18, 2025 at 22:30 MST

Ink levels show ok, paper comes through with no image

⟐ Commented February 18, 2026 at 14:41 MST

⟐ Answered December 17, 2025 at 1:00 MST

now all the lights are blinking, and I don't know what else to try.

Thinks I tried:

Take out power supply

using epson adjustment tried almost every test and all failed to fix it

⟐ Commented February 19, 2026 at 23:26 MST

⟐ Commented May 24, 2025 at 7:03 MST

⟐ Commented August 11, 2025 at 2:46 MST

⟐ Commented September 04, 2025 at 16:38 MST

⟐ Commented June 16, 2025 at 12:33 MST

⟐ Commented January 26, 2025 at 23:19 MST

Hoping some could help!

⟐ Commented December 14, 2025 at 15:59 MST

Edit: "All 4 cartridges were replaced with Epson brand cartridges."

⟐ Commented August 27, 2024 at 7:56 MST

⟐ Commented March 16, 2023 at 21:05 MST

1. Cancel all print jobs.

2. Open the printer cover and remove any jammed paper.

3. Close the cover and turn the power off and then on again.

There is absolutely no paper jam. I've tried unplugging it, rebooting - nothing helps.

I cannot get the ink head to unlock so I can't use a method suggested by others.

I now have a very expensive printer that worked for only a year.

Any suggestions - other than send it back to Epson for repair?

⟐ Answered July 19, 2025 at 10:01 MST

I have an Epson L3110 and for some weeks the color printing was getting weaker and weaker.

I followed youtube and cleaned the print head using isopropanol and warm distilled water. After cleaning, there was no blockage to water flowing through the printhead ... everything seemed great. After putting the printhead back in, I did nozzle cleaning 4x to make sure the printhead was loaded with color ... and the color printing was OK!

I turned the printed off for the night and the next day, printing in color resulted in nothing being printed, only black printing worked! I cleaned the head again, did 5x nozzle cleaning to fill the printhead with color, I made sure there is no air in the tubes and when printing in color .. nothing happenned, I still cannot print anything in color.

What am I doing wrong?

Best,

Daniel

⟐ Answered November 26, 2025 at 7:06 MST

I don't think there is any issue with the hardware because its printing single pages without any problem, just the duplex printing is causing problems.

I want to add to this... I am also having problem with the odd page/even page printing. Every 15 pages or so later, the printer will skip a page, thus completely disturbing the page sequence. The vendor has not been able to give any solution. Wrote to Epson, got no reply yet (it has been two weeks).

This problem is occurring in Foxit PDF reader as well as MS Word, making the printer practically useless to me.

⟐ Commented March 08, 2025 at 21:55 MST

⟐ Answered January 04, 2025 at 1:36 MST

"preparing to print CD/DVD" then

"close the output tray all the way inside before inserting CD/DVD tray"

Have checked for updates all up to date.

⟐ Commented November 26, 2024 at 10:56 MST

I did take a look and they say to verify there is no paper jam, which is the case here and then to call the Epson support centre, what I did.

The answer I got from the guy I spoke to is to send it to an authorized repair centre as there is nothing he could do over the phone. It seems it is a mechanical problem, but I wondered how much the repair will cost (probably more than what I paid for the printer...), so the technician offered me a big $30 discount to buy a new printer on their website...

Did someone get the same problem and fixed it? If yes could you please tell me what you did?

Many thanks in advance

⟐ Answered May 12, 2024 at 10:27 MST

I wonder if there is dust or dirt in the ADF causing the line to appear, if so where can I find instructions for opening and cleaning ADF.

⟐ Commented May 14, 2023 at 19:02 MST