iFixit - Answers With Device "Electrolux Vacuum"

Electrolux Vacuum: How can I revive a cordless Electrolux stickvac?

Mon, 24 Feb 2025 07:52:23 -0700

I own an Electrolux,Pronto 2in1 cordless vacuum,after one year of occasional use, the suction is very poor and it doesn't last very long.

⟐ Commented February 24, 2025 at 7:52 MST

Electrolux Vacuum: Changing the drive wheels, has someone done it?

Fri, 28 Jun 2024 03:10:06 -0700

Hi,

My Electrolux Pure i9 (1st gen.) has developed an error: It leaves the charging station and runs for a minute or two, then displays E15 and says "I'm stuck, please move me a little" on a smooth parquet floor. It looks like it is the drive wheel that is either malfunctioning or needs a cleaning.

Has anybody done a tear down of this model?

I would really like to know how hard I can push on the plastic bits, because I am a bit worried about taking off the front bumper, since it seems to stick to the front of the machine, even if I get the sides loose.

⟐ Answered June 28, 2024 at 3:10 MST

Electrolux Vacuum: How can I fix my vacuum that is blowing rather than suctioning?

Sat, 28 Dec 2019 09:56:56 -0700

Electrolux Precision Clean

Model: EL8805

I have followed troubleshooting instructions in the online owner’s manual. I have cleaned both the cannister filter and the HEPA filter. I cleaned the brushroll. I took the vacuum apart and cleaned all valves and tubes that I could reach. I think the entire machine has been cleaned, but the base is not suctioning. It feels like it is blowing cool air. The wand DOES suction. Thanks for any help. This is not my area of expertise, so a detailed response would be much appreciated. Thanks!

PS - I saw a similar previous post but was not able to use it to solve my issue.

⟐ Commented December 28, 2019 at 9:56 MST

Electrolux AEG FM72: Showing it is charging, but no powder. Does not switch on.?

Thu, 13 Jun 2019 23:21:28 -0700

no power when switched on

⟐ Answer edited June 13, 2019 at 23:21 MST

Electrolux ZUA3840: clog in vacuum cleaner hose

Wed, 30 Nov 2016 06:12:49 -0700

My canister vacuum is old (Sharp EC6310g) but sturdy. Parts not available. There's a rock in the hose and I've tried blowing it with my wet/dry vac, using plumbing snake--nothing has dislodged it. Can hose be taken apart and put back together? How? Rock is in non-flexible hard plastic where there's an angle, near top. Would appreciate any help!

⟐ Commented November 30, 2016 at 6:12 MST

Electrolux Vacuum: Why does my Electrolux vacuum keep shutting off?

Sat, 07 Dec 2024 23:04:39 -0700

We have an Electrolux Renaissance cannister vacuum from the mid 1990's. When we turn it on, it powers up and has good suction and then after 1-2 minutes it shuts down. If I unplug it, re-plug it in, and turn it back on, it does the same thing again...over and over. The bag is new, and the motor seems to run well until it shuts off. Any thoughts or advice?

⟐ Answer edited December 07, 2024 at 23:04 MST

Electrolux Vacuum: Pure i9 error code 20: is it the batteries or the charging station?

Tue, 30 Apr 2024 23:07:16 -0700

My robot vacuum Electrolux Pure i9 has been working fine for 5 years, but a few days ago it reported an Error code 20, which should mean that it is the wrong charging station.

It is the exact same charging station as always, so I am wondering if it might be the batteries instead?

(I don't want to spend money on unnecessary purchases).

⟐ Commented April 30, 2024 at 23:07 MST

Electrolux Vacuum: Electrolux Ergorapido EER89IBM brush roller doesn't spin

Sun, 03 Jul 2022 07:34:23 -0700

Hi all,

I have an electrolux Ergorapido EER89IBM, and the brush roller doesn't spin. There was a period where it spins for about a minute before stopping, and it will spin again if I switch the vacuum off then on again. Now it won't spin at all. The vacuum itself works fine, but since the roller doesn't spin it doesn't collect dust properly.

I'm thinking of replacing the motor in the nozzle since it might be damaged, but I have no idea how to disassemble the nozzle head. Does anyone have any guide on how to replace the motor?

⟐ Commented July 03, 2022 at 7:34 MST

Electrolux Vacuum: Vacuum has terrific suction except when I use the hose. Th

Fri, 08 Jun 2018 12:06:42 -0700

The suction is terrific until I use the hose which is not blocked.

⟐ Answered June 08, 2018 at 12:06 MST

Electrolux Vacuum: Wand keeps disconnecting from powerhead

Wed, 29 Jun 2022 11:43:56 -0700

I have an Electrolux model EL4307 cannister vacuum. The wand will not stay in the powerhead. If you lift the wand the powerhead disconnects. Is the issue with the coupling assembly in the powerhead or the wand? Thanks.

Electrolux Vacuum: How to replace power cordpower cord

Mon, 13 Apr 2020 10:01:44 -0700

how to replace power cord

⟐ Commented April 13, 2020 at 10:01 MST

Electrolux ZUA3840: My vacuum is not getting power

Thu, 26 Apr 2018 08:36:50 -0700

My vacuum just quit one day while in use and is not getting power any more, I thought it may have gotten too hot but after it has cooled .... will not come on!

Electrolux AEG FM72: Want address for parts list

Fri, 28 Aug 2015 14:37:53 -0700

Want axle and wheels where I get onto a parts list for electrolux mini vac FM72 Thanks folks

⟐ Edited August 28, 2015 at 14:37 MST