iFixit - Answers With Device "Electrolux Dishwasher"

Electrolux Dishwasher: Error i20 after several drain attempts

Mon, 29 Jul 2024 12:20:09 -0700

Electrolux Dishwasher ESF66860WR

When I start any washing program the drain pump starts running several times for about a minute, then it shows error i20.

Drain pump itself works perfectly, if I add some water in the machine it goes away. I've opened the drain pump just to check, it is clean and looks OK.

I guess there should be water level sensor which may become dirty, but I can't find it.

Does anyone have an idea what could be wrong?

Thanks in adance for any help!

⟐ Answered July 29, 2024 at 12:20 MST

Electrolux PLD2850RDC2: Why is black grit all over dishes after wash?

Tue, 29 May 2018 10:20:56 -0700

Black grit in dishwasher.

⟐ Answer accepted May 29, 2018 at 10:20 MST

Electrolux PLD2850RDC2: dishwasher does not heat

Mon, 09 Apr 2018 22:57:43 -0700

replaced the heating element and it still does not heat

⟐ Commented April 09, 2018 at 22:57 MST

Electrolux Dishwasher: What does code i11 mean?

Sat, 08 Jan 2022 14:12:24 -0700

When I start the Dishwasher, it makes a few starting sounds, counts down 4 or 5 minutes, then stops and shows error i11. What’s wrong with it? (A few weeks ago, it already stopped opening the door for the last bit to dry dishes…)

⟐ Answered January 08, 2022 at 14:12 MST

Electrolux Dishwasher: Electrolux EX600 wont finish cycle and trips power

Wed, 22 Oct 2025 07:53:59 -0700

Washes and drains fine, but just stops short of completing cycle, leaves a small amount of water in sump and trips power. After resetting power, works again , but repeats failure mode again. Seems to be temperature related.

⟐ Answered October 22, 2025 at 7:53 MST

Electrolux Dishwasher: Electrolux EUCAIMLG A-1 during Fill

Wed, 25 Jun 2025 03:08:13 -0700

I have a Electrolux dishwasher model eucaimlg, and it has been started up after some months standstill. It starts fill and water temp goes from 16 to 18 and then it stops with message A-1. I have checked the overflow pipe, but cannot see any issues.

It is +10 years. In addition I can mention that when I start the machine it takes about 10 minutes with filll and it seems that it stops just before heating part. Could it be a thermostatic issue?

⟐ Commented June 25, 2025 at 3:08 MST

Electrolux Dishwasher: Meanin of code C13

Wed, 28 May 2025 00:20:59 -0700

Meaning of code C13?

⟐ Answer edited May 28, 2025 at 0:20 MST

Electrolux Dishwasher: Dishwasher not heating water

Fri, 21 Feb 2025 01:49:03 -0700

Good Morning All,

I have an Electrolux dishwasher model No.ESL5201LO that is not currently heating. I have replaced the heater, no problem there. However, the water is still not heating. I have measured the supply voltage to the heater at 57 volts AC with the heater disconnected (should be 230 volts). My next step is to replace the turbidity sensor (currently awaiting delivery from Electrolux). Do you guys have any other insights into why I have reduced voltage supply?

⟐ Commented February 21, 2025 at 1:49 MST

Electrolux Dishwasher: Help! Used Pipe Drainer into Dishwasher.

Sun, 17 Dec 2023 19:51:17 -0700

Hello, I need some help please. My dishwasher was blocked so I had the 'brilliant' idea to put pipe drainer into it. Obviously it didn't help, we had to call an engineer which came after 15 days to fix it. The chemical stayed in the dishwasher for 15 days, after the engineer fixed it, I run 4x 70 degree cycles but I'm still worried it all the chemical had gone away. Please don't judge me, I was so silly to do that. What shall I do now, will the dishwasher be still contaminated? How can I make sure is cleaned and will it be ever safe to use again? Thanks a lot for any advise.

⟐ Answer accepted December 17, 2023 at 19:51 MST

Electrolux Dishwasher: Water dripping from Dishwasher model Electrolux fgbd2431kw0

Thu, 22 Dec 2022 18:21:46 -0700

slow drip of water coming from area where a white colored wire is connected. White wire next to red wire. Looks like a brass valve plastic sleeve and white wire. Not sure what part this is

⟐ Commented December 22, 2022 at 18:21 MST

Electrolux Dishwasher: Error E3 and now doesn’t refill with water

Wed, 29 Oct 2025 16:28:59 -0700

It was working then stopped showing error E3, after that it never refilled with water again

⟐ Commented October 29, 2025 at 16:28 MST

Electrolux Dishwasher: Dishwasher not heating or drying ESF8810ROX

Mon, 16 Jun 2025 11:44:44 -0700

Hi!

I have a ESF8810ROX PNC 911448305. Machine bought in Sweden.
It recently stopped heating the water and drying the dishes.

I am now looking for a service manual and any tips on how to troubleshoot the machine.

Greatful for any suggestions.

Electrolux Dishwasher: It's showing E2 error how can I scheck what should be check and how to

Fri, 21 Mar 2025 01:25:51 -0700

Dishwasher is showing E2 error what can be the reason and how to check step by step .

⟐ Commented March 21, 2025 at 1:25 MST

Electrolux Dishwasher: Wiring Diagram for EHTAIG

Tue, 24 Sep 2024 12:00:19 -0700

Where I can i get a wiring diagram for Electrolux EHTAIG ?

⟐ Edited September 24, 2024 at 12:00 MST

Electrolux Dishwasher: Dishwasher not working I.51 code

Sat, 01 Apr 2023 12:57:07 -0700

Dishwasher not working. I.51 on

Electrolux Dishwasher: Why it does not start washing?

Wed, 17 Nov 2021 03:17:24 -0700

I start the dishwasher machine, you hear a weird sound but it won’t start washing. I feel like the pomp does not drain the old water but I do not know how to clean it and where is it exactly.

The times goes down but nothing happens.. just a weird sound like is trying to do something but can’t.. also the water does not come inside.

⟐ Commented November 17, 2021 at 3:17 MST

Electrolux Dishwasher: Programme does not end

Thu, 06 May 2021 15:10:01 -0700

Electrolux 91153921500 / Model ESL5205LO. Programme does not finish and can run for hours, water does not drain, issue on eco wash and normal wash. To finish programme and drain water 30min programme needs to be selected. Does not happen all the time maybe every 4 or 5 washes. Tried dishwasher cleaners and cleaned filters. Checked water inlet and drain hose. Thinking temp/turbidity sensor which would be worthwhile to repair, or motherboard fault which is uneconomical. If temp/turbidity sensor where is the located?