iFixit - Answers With Device "Dyson Ball Multi Floor Upright"

Dyson Ball Multi Floor Upright: Wand has no suction

Thu, 02 Apr 2026 07:42:41 -0700

My wand is not sucking. I took the hose completely off and it appears that the connecting hose at the base where the wand hose connects at the base. I have checked all hoses and the wand, there is not any blockages.

⟐ Commented April 02, 2026 at 7:42 MST

Dyson Ball Multi Floor Upright: How to put the wand back in place.

Mon, 16 Dec 2024 16:03:22 -0700

I have used the wand now wish to put it back in place, HOW?

⟐ Answered December 16, 2024 at 16:03 MST

Dyson Ball Multi Floor Upright: Why is only one side of the brush bar turning?

Fri, 27 Jan 2023 19:47:26 -0700

Only one side of the brush bar is rotating when in use.

⟐ Commented January 27, 2023 at 19:47 MST

Dyson Ball Multi Floor Upright: My Dyson works great when upright but doesn't suck well on the floor.

Sun, 16 Oct 2022 01:13:03 -0700

WHen It's upright the hose works fine, but when running (normal use) it seems to not have good vacuum. Is there a seal that's possibly broken? Where are the most common failures?

⟐ Answered October 16, 2022 at 1:13 MST

Dyson Ball Multi Floor Upright: Why is my Dyson multi floor ball not sucking when I cleaned it out

Fri, 12 Aug 2022 16:48:01 -0700

My Dyson Ball multi floor is not sucking I went through the entire thing did not find any clogs that I pull off the the catcher the round tube and clean the filters out of that clean the HEPA filter pulled the side of the ball often see anything cotton that filter went through all the tubing and didn’t find anything in there it turns on and the brushes flick but it’s not sucking from the front side sucking from the top side so it’s sucking out we’re supposed be blowing in

⟐ Commented August 12, 2022 at 16:48 MST

Dyson Ball Multi Floor Upright: Dyson Ball M. Fl. Upright , Ball area heats up after using once.

Tue, 06 Jun 2017 11:55:05 -0700

Used the extension hose to dust cabinets and along wall. After one use the ball area heats up. Let it rest, checked ball and canister filter which appeared clean. good suction from wand , still heats up after about 5 to 10 minutes. It is new , should the ball filter area heat up. Where else do I check for a blockage. Is it a defect???

Dyson Ball Multi Floor Upright: Why is suction too strong on Dyson DC25?

Mon, 10 May 2021 08:04:43 -0700

I had to change the brush bar and now the suction from the base is too strong very hard to push over carpet. I have tried the brush bar reset button but it’s not making any difference any suggestions please?

⟐ Answer accepted May 10, 2021 at 8:04 MST

Dyson Ball Multi Floor Upright: How to repair split at the bottom of the hose

Thu, 10 Dec 2020 09:15:05 -0700

Hose split just after the connection to the base of machine how do I reconstruct hose to plastic connector

⟐ Comment deleted December 10, 2020 at 9:15 MST

Dyson Ball Multi Floor Upright: Why is the wand suction too strong

Sat, 19 Sep 2020 12:26:48 -0700

I have a DC41 which operates normally except if I try to use the wand the suction is so powerful I can’t even extend it out to use. I looked over everything and there are no blockages as far as I can tell. It’s quite frustrating.

⟐ Answered September 19, 2020 at 12:26 MST

Dyson Ball Multi Floor Upright: What is a Red C clip and where is it located

Sat, 01 Feb 2020 07:53:08 -0700

Rotating brush not working

⟐ Answer accepted February 01, 2020 at 7:53 MST

Dyson Ball Multi Floor Upright: Why is my dyson squealing?

Sat, 23 May 2026 10:17:08 -0700

Why is my Dyson making that hate pit squealing noise

Dyson Ball Multi Floor Upright: My vacuum is not working for carpet only on tiles it's working, doesn

Sat, 19 Aug 2023 21:38:08 -0700

My vacuum doesn't spin on carpet

Dyson Ball Multi Floor Upright: What's wrong with my Dyson Vacumn Cleaner?

Sun, 23 Oct 2022 11:29:59 -0700

My Dyson Lught Ball vacumn cleanerwill work without the bin canister. Once I attach the canister it sucks hard, but can't push! Getting disgusted! Have cleaned all filters and looks good, but somethings wrong.

Dyson Ball Multi Floor Upright: Need geared belt 20724-01-02 also printed 0624007 338

Fri, 12 Nov 2021 09:34:56 -0700

Dyson does not sell the belt, they want you to buy the whole brush assembly, disposing the motor, gears, housing, brush, base plate, connector it is not the idea of a repair, sounds a lot like replacing the car engine because it needs new spark plugs.

Any help locating this small geared belt will be appreciated, I have pictures of the belt if needed.

Thank you :-)

⟐ Reopened November 12, 2021 at 9:34 MST

Dyson Ball Multi Floor Upright: broken belt on roll bar

Tue, 22 Dec 2020 05:59:33 -0700

the belt broke on the roll bar can i replace myself ?

⟐ Commented December 22, 2020 at 5:59 MST

Dyson Ball Multi Floor Upright: anyone have a detailed spec guide to put back together a Dyson up13

Thu, 10 Dec 2020 08:46:22 -0700

I took the Dyson apart to clean the entire vacuum piece by piece now I am afraid I do not remember how to put it all back correctly.. Does anyone have a detailed spec guide diagram of how it gets put back together again… Dyson Multi Floor UP13 - please email me back Help! wife is going to kill me…. JamesCRodriguez@Gmail.com

⟐ Edited by author December 10, 2020 at 8:46 MST

Dyson Ball Multi Floor Upright: Suction on beater bar switches to the hose when properly reclined

Sun, 29 Nov 2020 16:52:35 -0700

My dyson light ball seems to have great suction in the hose but when I recline it back and the feet which help the dyson to stand flick upwards, the suction switches to the hose instead of the beater bar.

I can’t figure out what’s going on with it?

Dyson Ball Multi Floor Upright: Switching from base to wand suction when reclined

Fri, 21 Aug 2020 13:36:44 -0700

The suction switches on it’s own from base to wand when hoover is reclined more than 45 degrees. When upright, the wand is working; when reclined by small angle it switches to the base but when reclined more than 45 degrees it turns back to the wand. I wonder what I can do to fix it?

Dyson Ball Multi Floor Upright: Why do my brushes & lights not operate?

Fri, 14 Feb 2020 12:25:48 -0700

why do my brushes not work mon my candle battery vacuum

Dyson Ball Multi Floor Upright: Beater bar on my days on dc66

Sat, 03 Aug 2019 10:31:18 -0700

I have a dysentery DC 66 upright vacuum.

I have taken apart my beater bar on my power head - there is a longer brush and a shorter brush. There is a small drive shaft that drives these two brushes. In around the little drive shaft there is a lot of hair - can I take the drive shaft apart to clear away all the hair??????