iFixit - Answers With Device "Delonghi Desk Fan VLT 1000"

Delonghi Desk Fan VLT 1000: Fan not rotating without help

Fri, 12 Jul 2024 12:49:39 -0700

Blades of my desk fan are not rotating when it is switched on

⟐ Answered July 12, 2024 at 12:49 MST

Delonghi Desk Fan VLT 1000: Electric wire burn want to replace with new wire.

Sat, 12 Aug 2023 14:36:00 -0700

Want to replace new wire so help me with main neutral and earth connection

⟐ Answered August 12, 2023 at 14:36 MST

Delonghi Desk Fan VLT 1000: Fan speed slow initially

Sat, 01 Jun 2024 10:01:03 -0700

I have a tower fan which initially runs on low speed and after 20-30 min the speed becomes normal. What could be the reason and how to fix the issue?

⟐ Answered June 01, 2024 at 10:01 MST

Delonghi Desk Fan VLT 1000: Fan is not rotating with help also

Wed, 17 Apr 2024 07:35:48 -0700

My fan is not rotating when I on only humming sound came when I help to rotate fan it stuck but when fan is off and I rotate it rotate freely

⟐ Answer accepted April 17, 2024 at 7:35 MST

Delonghi Desk Fan VLT 1000: Need help wiring capacitor in 2-speed pedestal fan

Fri, 28 Jun 2024 23:06:12 -0700

This is not a desk fan - but no other suitable choices available. I purchased an old pedestal fan that was missing a speed control switch. This must be a 2-speed fan as there are only 4 wires from motor (white, red, yellow and blue). I know that Red is hot, white is common, blue is low and yellow is high. I found a 2-speed pull switch and have 2-wire capacitor. I have the wires and switch connections sorted our - but am unsure where to connect the 2 capacitor wires. I can get the 2 speeds to work - but don't think I've found the right combo for capacitor.

Q: Capacitor; is it 1 wire to hot (white) and 1 to high speed (yellow)?

⟐ Answered June 28, 2024 at 23:06 MST

Delonghi Desk Fan VLT 1000: My fan stop spinning

Thu, 13 Jun 2024 12:50:26 -0700

my fan stop spinning

⟐ Answered June 13, 2024 at 12:50 MST

Delonghi Desk Fan VLT 1000: and the controller is missing

Sat, 13 Apr 2024 10:15:50 -0700

Two speed controler wire are there and the controller is missing

⟐ Edited April 13, 2024 at 10:15 MST

Delonghi Desk Fan VLT 1000: Delonghi Desk Fan - tear down assistance

Wed, 07 Feb 2018 13:58:12 -0700

I have one of these that is about ten years old and there has been a build up of friction from dust or perhaps a lack of lube. Was breaking this down for a clean and lube / oil but cant seem to figure out how to remove the swing control knob. It is the last piece to the puzzle for removing the motor and bearing housing. I have tried to unscrew it both anti-clockwise and clockwise (which only seems to unlock / lock it to the swing motor shaft. as you would expect), but it seems to be held in by something else. There are no screws or bolts visible and I have had a feel around for a circlip but doesn't seem to be one (and no room for one really). Has anyone got experience with these fans and have an idea how to remove? thanks

⟐ Comment deleted February 07, 2018 at 13:58 MST

Delonghi Desk Fan VLT 1000: المروحه صوتها عالي وهى شغاله

Sat, 29 Jun 2024 11:45:12 -0700

المروحه صوتها عالي وهى شغاله